Dynamic Control of Particle Deposition in Evaporating Droplets by an External Point Source of Vapor.
Ontology highlight
ABSTRACT:
SUBMITTER: Malinowski R
PROVIDER: S-EPMC5797983 | biostudies-literature | 2018 Feb
REPOSITORIES: biostudies-literature
Publications
Dynamic Control of Particle Deposition in Evaporating Droplets by an External Point Source of Vapor.
Malinowski Robert R Volpe Giovanni G Parkin Ivan P IP Volpe Giorgio G
The journal of physical chemistry letters 20180124 3
The deposition of particles on a surface by an evaporating sessile droplet is important for phenomena as diverse as printing, thin-film deposition, and self-assembly. The shape of the final deposit depends on the flows within the droplet during evaporation. These flows are typically determined at the onset of the process by the intrinsic physical, chemical, and geometrical properties of the droplet and its environment. Here, we demonstrate deterministic emergence and real-time control of Marango ...[more]
Similar Datasets
Project description:The study of the behavior of sessile droplets on solid substrates is not only associated with common everyday phenomena, such as the coffee stain effect, limescale deposits on our bathroom walls , but also very important in many applications such as purification of pharmaceuticals, de-icing of airplanes, inkjet printing and coating applications. In many of these processes, a phase change happens within the drop because of solvent evaporation, temperature changes or chemical reactions, which consequently lead to liquid to solid transitions in the droplets. Here we show that crystallization patterns of evaporating of water drops containing dissolved salts are different from the stains reported for evaporating colloidal suspensions. This happens because during the solvent evaporation, the salts crystallize and grow during the drying. Our results show that the patterns of the resulting salt crystal stains are mainly governed by wetting properties of the emerging crystal as well as the pathway of nucleation and growth, and are independent of the evaporation rate and thermal conductivity of the substrates.
| S-EPMC4445064 | biostudies-literature
Project description:The detailed physico-chemical characteristics of respiratory droplets in ambient air, where they are subject to evaporation, are poorly understood. Changes in the concentration and phase of major components in a droplet-salt (NaCl), protein (mucin) and surfactant (dipalmitoylphosphatidylcholine)-may affect the viability of any pathogens contained within it and thus may affect the efficiency of transmission of infectious disease by droplets and aerosols. The objective of this study is to investigate the effect of relative humidity (RH) on the physico-chemical characteristics of evaporating droplets of model respiratory fluids. We labelled these components in model respiratory fluids and observed evaporating droplets suspended on a superhydrophobic surface using optical and fluorescence microscopy. When exposed to continuously decreasing RH, droplets of different model respiratory fluids assumed different morphologies. Loss of water induced phase separation as well as indication of a decrease in pH. The presence of surfactant inhibited the rapid rehydration of the non-volatile components. An enveloped virus, ϕ6, that has been proposed as a surrogate for influenza virus appeared to be homogeneously distributed throughout the dried droplet. We hypothesize that the increasing acidity and salinity in evaporating respiratory droplets may affect the structure of the virus, although at low enough RH, crystallization of the droplet components may eliminate their harmful effects.
| S-EPMC5832737 | biostudies-literature
Project description:The Marangoni contraction of sessile drops of a binary mixture of a volatile and a nonvolatile liquid has been investigated experimentally and theoretically. The origin of the contraction is the locally inhomogeneous evaporation rate of sessile drops. This leads to surface tension gradients and thus to a Marangoni flow. Simulations show that the interplay of Marangoni flow, capillary flow, diffusive transport, and evaporative losses can establish a quasistationary drop profile with an apparent nonzero contact angle even if both liquid components individually wet the substrate completely. Experiments with different solvents, initial mass fractions, and gaseous environments reveal a previously unknown universal power-law relation between the apparent contact angle and the relative undersaturation of the ambient atmosphere: θapp ∼ (RHeq - RH)1/3. This experimentally observed power law is in quantitative agreement with simulation results. The exponent can also be inferred from a scaling analysis of the hydrodynamic-evaporative evolution equations of a binary mixture of liquids with different volatilities.
| S-EPMC5645759 | biostudies-literature
Project description:The study of two- dimensional (2D) materials is a rapidly growing area within nanomaterials research. However, the high equipment costs, which include the processing systems necessary for creating these materials, can be a barrier to entry for some researchers interested in studying these novel materials. Such process systems include those used for chemical vapor deposition, a preferred method for making these materials. To address this challenge, this article presents the first open-source design for an automated chemical vapor deposition system that can be built for less than a third of the cost for a comparable commercial system. The materials and directions for the system are divided by subsystems, which allows the system to be easily built, customized and upgraded, depending upon the needs of the user. We include the details for the specific hardware that will be needed, instructions for completing the build, and the software needed to automate the system. With a chemical vapor deposition system built as described, a variety of 2D nanomaterials and their heterostructures can be grown. Specifically, the experimental results clearly demonstrate the capability of this open-source design in producing high quality, 2D nanomaterials such as graphene and tungsten disulfide, which are at the forefront of research in emerging semiconductor devices, sensors, and energy storage applications.
| S-EPMC6334948 | biostudies-literature
Project description:Besides its unprecedented physical and chemical characteristics, graphene is also well known for its formidable potential of being a next-generation device material. Work function (WF) of graphene is a crucial factor in the fabrication of graphene-based electronic devices because it determines the energy band alignment and whether the contact in the interface is Ohmic or Schottky. Tuning of graphene WF, therefore, is strongly demanded in many types of electronic and optoelectronic devices. Whereas study on work function tuning induced by doping or chemical functionalization has been widely conducted, attempt to tune the WF of graphene by controlling chemical vapor deposition (CVD) condition is not sufficient in spite of its simplicity. Here we report the successful WF tuning method for graphene grown on a Cu foil with a novel CVD growth recipe, in which the CH4/H2 gas ratio is changed. Kelvin probe force microscopy (KPFM) verifies that the WF-tuned regions, where the WF increases by the order of ~250 meV, coexist with the regions of intrinsic WF within a single graphene flake. By combining KPFM with lateral force microscopy (LFM), it is demonstrated that the WF-tuned area can be manipulated by pressing it with an atomic force microscopy (AFM) tip and the tuned WF returns to the intrinsic WF of graphene. A highly plausible mechanism for the WF tuning is suggested, in which the increased graphene-substrate distance by excess H2 gases may cause the WF increase within a single graphene flake. This novel WF tuning method via a simple CVD growth control provides a new direction to manipulate the WF of various 2-dimensional nanosheets as well as graphene.
| S-EPMC7303148 | biostudies-literature
Project description:For estimating the infection risk from virus-containing airborne droplets, it is crucial to consider the interplay of all relevant physical-chemical effects that affect droplet evaporation and sedimentation times. For droplet radii in the range 70 nm < R < 60 μm, evaporation can be described in the stagnant-flow approximation and is diffusion-limited. Analytical equations are presented for the droplet evaporation rate, the time-dependent droplet size, and the sedimentation time, including evaporation cooling and solute osmotic-pressure effects. Evaporation makes the time for initially large droplets to sediment much longer and thus significantly increases the viral air load. Using recent estimates for SARS-CoV-2 concentrations in sputum and droplet production rates while speaking, a single infected person that constantly speaks without a mouth cover produces a total steady-state air load of more than 104 virions at a given time. In a midsize closed room, this leads to a viral inhalation frequency of at least 2.5 per minute. Low relative humidity, as encountered in airliners and inside buildings in the winter, accelerates evaporation and thus keeps initially larger droplets suspended in air. Typical air-exchange rates decrease the viral air load from droplets with an initial radius larger than 20 μm only moderately.
| S-EPMC7409921 | biostudies-literature
Project description:The evaporation of suspension droplets is the underlying mechanism in many surface-coating and surface-patterning applications. However, the uniformity of the final deposit suffers from the coffee-stain effect caused by contact line pinning. Here, we show that control over particle deposition can be achieved through droplet evaporation on oil-wetted hydrophilic surfaces. We demonstrate by flow visualization, theory, and numerics that the final deposit of the particles is governed by the coupling of the flow field in the evaporating droplet, the movement of its contact line, and the wetting state of the thin film surrounding the droplet. We show that the dynamics of the contact line can be tuned through the addition of a surfactant, thereby controlling the surface energies, which then leads to control over the final particle deposit. We also obtain an analytical expression for the radial velocity profile which reflects the hindering of the evaporation at the rim of the droplet by the nonvolatile oil meniscus, preventing flow toward the contact line, thus suppressing the coffee-stain effect. Finally, we confirm our physical interpretation by numerical simulations that are in qualitative agreement with the experiment.
| S-EPMC7382233 | biostudies-literature
Project description:Accelerated reactions in microdroplets have been reported for a wide range of reactions with some microdroplet reactions occurring over a million times faster than the same reaction in bulk solution. Unique chemistry at the air-water interface has been implicated as a primary factor for accelerated reaction rates, but the role of analyte concentration in evaporating droplets has not been as well studied. Here, theta-glass electrospray emitters and mass spectrometry are used to rapidly mix two solutions on the low to sub-microsecond time scale and produce aqueous nanodrops with different sizes and lifetimes. We demonstrate that for a simple bimolecular reaction where surface chemistry does not appear to play a role, reaction rate acceleration factors are between 102 and 107 for different initial solution concentrations, and these values do not depend on nanodrop size. A rate acceleration factor of 107 is among the highest reported and can be attributed to concentration of analyte molecules, initially far apart in dilute solution, but brought into close proximity in the nanodrop through evaporation of solvent from the nanodrops prior to ion formation. These data indicate that analyte concentration phenomenon is a significant factor in reaction acceleration where droplet volume throughout the experiment is not carefully controlled.
| S-EPMC10171075 | biostudies-literature
Project description:The morphologies and microstructures of Au-catalyzed InGaAs nanowires (NWs) prepared by a two-step solid-source chemical vapor deposition (CVD) method were systematically investigated using scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). The detailed structural characterization and statistical analysis reveal that two specific morphologies are dominant in InGaAs NWs, a zigzag surface morphology and a smooth surface morphology. The zigzag morphology results from the periodic existence of twining structures, and the smooth morphology results from a lack of twining structures. HRTEM images and energy-dispersive X-ray spectroscopy (EDX) indicate that the catalyst heads have two structures, Au4In and AuIn2, which produce InGaAs NWs in a cubic phase crystalline form. The growth mechanism of the InGaAs NWs begins with Au nanoparticles melting into small spheres. In atoms are diffused into the Au spheres to form an Au-In alloy. When the concentration of In inside the alloy reaches its saturation point, the In precipitate reacts with Ga and As atoms to form InGaAs at the interface between the catalyst and substrate. Once the InGaAs compound forms, additional precipitation and reactions only occur at the interface of the InGaAs and the catalyst. These results provide a fundamental understanding of the InGaAs NW growth process which is critical to the formation of high-quality InGaAs NWs for various device applications.
| S-EPMC6119172 | biostudies-literature
Project description:BACKGROUND:Cell-based experimentation in microfluidic droplets is becoming increasingly popular among biotechnologists and microbiologists, since inherent characteristics of droplets allow high throughput at low cost and space investment. The range of applications for droplet assays is expanding from single cell analysis toward complex cell-cell incubation and interaction studies. As a result of cellular metabolism in these setups, relevant physicochemical alterations frequently occur before functional assays are conducted. However, to use droplets as truly miniaturized bioreactors, parameters like pH and oxygen availability should be controlled similar to large-scale fermentation to ensure reliable research. RESULTS:Here, we introduce a comprehensive strategy to monitor and control pH for large droplet populations during long-term incubation. We show the correlation of fluorescence intensity of 6-carboxyfluorescein and pH in single droplets and entire droplet populations. By taking advantage of inter-droplet transport of pH-mediating molecules, the average pH value of several million droplets is simultaneously adjusted in an a priori defined direction. To demonstrate the need of pH control in practice, we compared the fermentation profiles of two E. coli strains, a K12-strain and a B-strain, in unbuffered medium with 5 g/L glucose for standard 1 L bioreactors and 180 pL droplets. In both fermentation formats, the commonly used B-strain E. coli BL21 is able to consume glucose until depletion and prevent a pH drop, while the growth of the K12-strain E. coli MG1655 is soon inhibited by a low pH caused by its own high acetate production. By regulating the pH during fermentation in droplets with our suggested strategy, we were able to prevent the growth arrest of E. coli MG1655 and obtained an equally high biomass yield as with E. coli BL21. CONCLUSION:We demonstrated a comparable success of pH monitoring and regulation for fermentations in 1 L scale and 180 pL scale for two E. coli strains. This strategy has the potential to improve cell-based experiments for various microbial systems in microfluidic droplets and opens the possibility for new functional assay designs.
| S-EPMC6990587 | biostudies-literature