Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mechanisms of Airborne Infection via Evaporating and Sedimenting Droplets Produced by Speaking.

ABSTRACT: For estimating the infection risk from virus-containing airborne droplets, it is crucial to consider the interplay of all relevant physical-chemical effects that affect droplet evaporation and sedimentation times. For droplet radii in the range 70 nm < R < 60 μm, evaporation can be described in the stagnant-flow approximation and is diffusion-limited. Analytical equations are presented for the droplet evaporation rate, the time-dependent droplet size, and the sedimentation time, including evaporation cooling and solute osmotic-pressure effects. Evaporation makes the time for initially large droplets to sediment much longer and thus significantly increases the viral air load. Using recent estimates for SARS-CoV-2 concentrations in sputum and droplet production rates while speaking, a single infected person that constantly speaks without a mouth cover produces a total steady-state air load of more than 10⁴ virions at a given time. In a midsize closed room, this leads to a viral inhalation frequency of at least 2.5 per minute. Low relative humidity, as encountered in airliners and inside buildings in the winter, accelerates evaporation and thus keeps initially larger droplets suspended in air. Typical air-exchange rates decrease the viral air load from droplets with an initial radius larger than 20 μm only moderately.

SUBMITTER: Netz RR

PROVIDER: S-EPMC7409921 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Salt stains from evaporating droplets.

Project description:The study of the behavior of sessile droplets on solid substrates is not only associated with common everyday phenomena, such as the coffee stain effect, limescale deposits on our bathroom walls , but also very important in many applications such as purification of pharmaceuticals, de-icing of airplanes, inkjet printing and coating applications. In many of these processes, a phase change happens within the drop because of solvent evaporation, temperature changes or chemical reactions, which consequently lead to liquid to solid transitions in the droplets. Here we show that crystallization patterns of evaporating of water drops containing dissolved salts are different from the stains reported for evaporating colloidal suspensions. This happens because during the solvent evaporation, the salts crystallize and grow during the drying. Our results show that the patterns of the resulting salt crystal stains are mainly governed by wetting properties of the emerging crystal as well as the pathway of nucleation and growth, and are independent of the evaporation rate and thermal conductivity of the substrates.

| S-EPMC4445064 | biostudies-literature

Physico-chemical characteristics of evaporating respiratory fluid droplets.

Project description:The detailed physico-chemical characteristics of respiratory droplets in ambient air, where they are subject to evaporation, are poorly understood. Changes in the concentration and phase of major components in a droplet-salt (NaCl), protein (mucin) and surfactant (dipalmitoylphosphatidylcholine)-may affect the viability of any pathogens contained within it and thus may affect the efficiency of transmission of infectious disease by droplets and aerosols. The objective of this study is to investigate the effect of relative humidity (RH) on the physico-chemical characteristics of evaporating droplets of model respiratory fluids. We labelled these components in model respiratory fluids and observed evaporating droplets suspended on a superhydrophobic surface using optical and fluorescence microscopy. When exposed to continuously decreasing RH, droplets of different model respiratory fluids assumed different morphologies. Loss of water induced phase separation as well as indication of a decrease in pH. The presence of surfactant inhibited the rapid rehydration of the non-volatile components. An enveloped virus, ϕ6, that has been proposed as a surrogate for influenza virus appeared to be homogeneously distributed throughout the dried droplet. We hypothesize that the increasing acidity and salinity in evaporating respiratory droplets may affect the structure of the virus, although at low enough RH, crystallization of the droplet components may eliminate their harmful effects.

| S-EPMC5832737 | biostudies-literature

Marangoni Contraction of Evaporating Sessile Droplets of Binary Mixtures.

Project description:The Marangoni contraction of sessile drops of a binary mixture of a volatile and a nonvolatile liquid has been investigated experimentally and theoretically. The origin of the contraction is the locally inhomogeneous evaporation rate of sessile drops. This leads to surface tension gradients and thus to a Marangoni flow. Simulations show that the interplay of Marangoni flow, capillary flow, diffusive transport, and evaporative losses can establish a quasistationary drop profile with an apparent nonzero contact angle even if both liquid components individually wet the substrate completely. Experiments with different solvents, initial mass fractions, and gaseous environments reveal a previously unknown universal power-law relation between the apparent contact angle and the relative undersaturation of the ambient atmosphere: θapp ∼ (RHeq - RH)1/3. This experimentally observed power law is in quantitative agreement with simulation results. The exponent can also be inferred from a scaling analysis of the hydrodynamic-evaporative evolution equations of a binary mixture of liquids with different volatilities.

| S-EPMC5645759 | biostudies-literature

Evaporating droplets on oil-wetted surfaces: Suppression of the coffee-stain effect.

Project description:The evaporation of suspension droplets is the underlying mechanism in many surface-coating and surface-patterning applications. However, the uniformity of the final deposit suffers from the coffee-stain effect caused by contact line pinning. Here, we show that control over particle deposition can be achieved through droplet evaporation on oil-wetted hydrophilic surfaces. We demonstrate by flow visualization, theory, and numerics that the final deposit of the particles is governed by the coupling of the flow field in the evaporating droplet, the movement of its contact line, and the wetting state of the thin film surrounding the droplet. We show that the dynamics of the contact line can be tuned through the addition of a surfactant, thereby controlling the surface energies, which then leads to control over the final particle deposit. We also obtain an analytical expression for the radial velocity profile which reflects the hindering of the evaporation at the rim of the droplet by the nonvolatile oil meniscus, preventing flow toward the contact line, thus suppressing the coffee-stain effect. Finally, we confirm our physical interpretation by numerical simulations that are in qualitative agreement with the experiment.

| S-EPMC7382233 | biostudies-literature

The role of analyte concentration in accelerated reaction rates in evaporating droplets.

Project description:Accelerated reactions in microdroplets have been reported for a wide range of reactions with some microdroplet reactions occurring over a million times faster than the same reaction in bulk solution. Unique chemistry at the air-water interface has been implicated as a primary factor for accelerated reaction rates, but the role of analyte concentration in evaporating droplets has not been as well studied. Here, theta-glass electrospray emitters and mass spectrometry are used to rapidly mix two solutions on the low to sub-microsecond time scale and produce aqueous nanodrops with different sizes and lifetimes. We demonstrate that for a simple bimolecular reaction where surface chemistry does not appear to play a role, reaction rate acceleration factors are between 102 and 107 for different initial solution concentrations, and these values do not depend on nanodrop size. A rate acceleration factor of 107 is among the highest reported and can be attributed to concentration of analyte molecules, initially far apart in dilute solution, but brought into close proximity in the nanodrop through evaporation of solvent from the nanodrops prior to ion formation. These data indicate that analyte concentration phenomenon is a significant factor in reaction acceleration where droplet volume throughout the experiment is not carefully controlled.

| S-EPMC10171075 | biostudies-literature

Inverse cascade of the vortical structures near the contact line of evaporating sessile droplets.

Project description:Microscopic imaging as well as the particle image velocimetry (PIV) are carried out to evaluate the concentration, velocity and vorticity fields near the contact line of the nano-particles-laden evaporating sessile droplets. After the onset of the linear thermocapillary instabilities due to the Marangoni perturbations, the non-linear state sets in and the micro-scale jet-like vortex structures are ejected from the contact line towards the center of the droplet. Afterwards, the jet-like vortical structures expand in the spanwise directions and start to interact with the neighbouring structures. Two types of the inverse cascade mechanisms are found to occur. In the first kind, the vortices of the similar length scale merge and continuously produce larger vortices and corresponding wavelength growth. The second inverse cascade mechanism takes place due to the entrainment of the smaller vortices into the larger structures. Both inverse cascade processes are identified as the continuous feeding of the kinetic energy from the smaller scales to the larger scales. For individual micro-jets the velocity field characterizes the jet-like vortex structures ejected from the contact line towards the droplet center opposing the bulk flow from the center towards the contact line. In addition, the vorticity field overlaid by the velocity streamlines identify the sense of rotation of the low pressure zones on either side of the micro-jet as well as the high pressure stagnation point at the tip.

| S-EPMC6494804 | biostudies-literature

Concentration gradients in evaporating binary droplets probed by spatially resolved Raman and NMR spectroscopy.

Project description:Understanding the evaporation process of binary sessile droplets is essential for optimizing various technical processes, such as inkjet printing or heat transfer. Liquid mixtures whose evaporation and wetting properties may differ significantly from those of pure liquids are particularly interesting. Concentration gradients may occur in these binary droplets. The challenge is to measure concentration gradients without affecting the evaporation process. Here, spectroscopic methods with spatial resolution can discriminate between the components of a liquid mixture. We show that confocal Raman microscopy and spatially resolved NMR spectroscopy can be used as complementary methods to measure concentration gradients in evaporating 1-butanol/1-hexanol droplets on a hydrophobic surface. Deuterating one of the liquids allows analysis of the local composition through the comparison of the intensities of the C–H and C–D stretching bands in Raman spectra. Thus, a concentration gradient in the evaporating droplet was established. Spatially resolved NMR spectroscopy revealed the composition at different positions of a droplet evaporating in the NMR tube, an environment in which air exchange is less pronounced. While not being perfectly comparable, both methods—confocal Raman and spatially resolved NMR experiments—show the presence of a vertical concentration gradient as 1-butanol/1-hexanol droplets evaporate.

| S-EPMC9169657 | biostudies-literature

Three-dimensional Monte Carlo model of the coffee-ring effect in evaporating colloidal droplets.

Project description:The residual deposits usually left near the contact line after pinned sessile colloidal droplet evaporation are commonly known as a "coffee-ring" effect. However, there were scarce attempts to simulate the effect, and the realistic fully three-dimensional (3D) model is lacking since the complex drying process seems to limit the further investigation. Here we develop a stochastic method to model the particle deposition in evaporating a pinned sessile colloidal droplet. The 3D Monte Carlo model is developed in the spherical-cap-shaped droplet. In the algorithm, the analytical equations of fluid flow are used to calculate the probability distributions for the biased random walk, associated with the drift-diffusion equations. We obtain the 3D coffee-ring structures as the final results of the simulation and analyze the dependence of the ring profile on the particle volumetric concentration and sticking probability.

| S-EPMC3945784 | biostudies-literature

Expansion of droplets during speaking and singing in Japanese.

Project description:During the COVID-19 pandemic, a number of infection clusters associated with choral singing have been reported. Singing generates droplets and carries the risk of spreading infection. However, no reports have explored droplet flight and aerosol production rates by singing and speaking in Japanese. First, we conducted an observation experiment evaluating the maximum flight distance and number of droplets generated by singing in Japanese, using a high-speed camera and particle counter. Twenty amateur choir members, 10 male and 10 female (five members for each of the four voices), participated in the experiment. Subsequently, although the maximum distance that droplets traveled by singing in Japanese was 61 cm for men (median of 46.5, interquartile range, 36-57) and 56 cm for women (median of 27.5, interquartile range, 20-50), droplets were observed anteriorly and laterally to be up to 66.8 cm. At the singer's mouth, ≥ 5 μm droplets were observed, whereas not observed at 1 meter toward the front of the singers in women and men, respectively. In German singing, droplets were observed up to 111 cm toward the front of the singer, possibly reflecting differences in pronunciation. In Japanese reading aloud, droplets were also observed up to 47 cm toward the front, whereas no droplet dispersion was observed by speaking the Japanese /a/ vowel or singing with wearing surgical mask toward the front. The aerosols produced when reading singing the /u/ vowels were significantly higher than those in other vowels. When singing in a choral group, keeping a sufficient distance at the front and side is recommended in minimizing infectious spread. If distance is not possible, practicing with /a/ vowels and avoiding consonants may be an alternative method. Our observations lasted only 50 seconds per song, and further observational studies are needed to determine the dynamics of aerosols that stay for long periods.

| S-EPMC9409545 | biostudies-literature

Dynamic Control of Particle Deposition in Evaporating Droplets by an External Point Source of Vapor.

Project description:The deposition of particles on a surface by an evaporating sessile droplet is important for phenomena as diverse as printing, thin-film deposition, and self-assembly. The shape of the final deposit depends on the flows within the droplet during evaporation. These flows are typically determined at the onset of the process by the intrinsic physical, chemical, and geometrical properties of the droplet and its environment. Here, we demonstrate deterministic emergence and real-time control of Marangoni flows within the evaporating droplet by an external point source of vapor. By varying the source location, we can modulate these flows in space and time to pattern colloids on surfaces in a controllable manner.

| S-EPMC5797983 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data