Dataset Information

An ad hoc three dimensionally printed tool facilitates intraesophageal suturing in experimental surgery.

ABSTRACT: BACKGROUND:Three-dimensional printing (3DP) has become popular for development of anatomic models, preoperative planning, and production of tailored implants. A novel laparoscopic, transgastric procedure for distal esophageal mucosectomy was developed. During this procedure, a space holder had to be introduced into the distal esophagus for exposure during suturing. The production process and evaluation of a 3DP space holder are described herein. MATERIALS AND METHODS:Computer-aided design software was used to develop models printed from polylactic acid. The prototype was adapted after testing in a cadaveric model. Subsequently, the device was evaluated in a nonsurvival porcine model. A mucosal purse-string suture was placed as orally as possible in the esophagus, in the intervention group with and in the control group without use of the tool (n = 8 each). The distance of the stitches from the Z-line was measured. The variability of stitches indicated the suture quality. RESULTS:The median maximum distance from the Z-line to purse-string suture was larger in the intervention group (5.0 [3.3-6.4] versus 2.4 [2.0-4.1] cm; P = 0.013). The time taken to place the sutures was shorter in the control group (P < 0.001). Stitch variance tended to be greater in the intervention group (2.3 [0.9-2.5] versus 0.7 [0.2-0.4] cm; P = 0.051). The time required for design and production of a tailored tool was less than 24 h. CONCLUSIONS:3DP in experimental surgery enables rapid production, permits repeated adaptation until a tailored tool is obtained, and ensures independence from industrial partners. With the aid of the space holder more orally located esophageal lesions came within reach.

SUBMITTER: Steinemann DC

PROVIDER: S-EPMC5961934 | biostudies-literature | 2018 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

An ad hoc three dimensionally printed tool facilitates intraesophageal suturing in experimental surgery.

Steinemann Daniel C DC Müller Philip C PC Apitz Martin M Nickel Felix F Kenngott Hannes G HG Müller-Stich Beat P BP Linke Georg R GR

The Journal of surgical research 20171114

<h4>Background</h4>Three-dimensional printing (3DP) has become popular for development of anatomic models, preoperative planning, and production of tailored implants. A novel laparoscopic, transgastric procedure for distal esophageal mucosectomy was developed. During this procedure, a space holder had to be introduced into the distal esophagus for exposure during suturing. The production process and evaluation of a 3DP space holder are described herein.<h4>Materials and methods</h4>Computer-aide ...[more]

PMID: 29433890

Similar Datasets

Project description:BACKGROUND:Autologous bone grafts remain a standard of care for the reconstruction of large bony defects, but limitations persist. The authors explored the bone regenerative capacity of customized, three-dimensionally printed bioactive ceramic scaffolds with dipyridamole, an adenosine A2A receptor indirect agonist known to enhance bone formation. METHODS:Critical-size bony defects (10-mm height, 10-mm length, full-thickness) were created at the mandibular rami of rabbits (n = 15). Defects were replaced by a custom-to-defect, three-dimensionally printed bioactive ceramic scaffold composed of ?-tricalcium phosphate. Scaffolds were uncoated (control), collagen-coated, or immersed in 100 ?M dipyridamole. At 8 weeks, animals were euthanized and the rami retrieved. Bone growth was assessed exclusively within scaffold pores, and evaluated by micro-computed tomography/advanced reconstruction software. Micro-computed tomographic quantification was calculated. Nondecalcified histology was performed. A general linear mixed model was performed to compare group means and 95 percent confidence intervals. RESULTS:Qualitative analysis did not show an inflammatory response. The control and collagen groups (12.3 ± 8.3 percent and 6.9 ± 8.3 percent bone occupancy of free space, respectively) had less bone growth, whereas the most bone growth was in the dipyridamole group (26.9 ± 10.7 percent); the difference was statistically significant (dipyridamole versus control, p < 0.03; dipyridamole versus collagen, p < 0.01 ). There was significantly more residual scaffold material for the collagen group relative to the dipyridamole group (p < 0.015), whereas the control group presented intermediate values (nonsignificant relative to both collagen and dipyridamole). Highly cellular and vascularized intramembranous-like bone healing was observed in all groups. CONCLUSION:Dipyridamole significantly increased the three-dimensionally printed bioactive ceramic scaffold's ability to regenerate bone in a thin bone defect environment.

Project description:The tympanic membrane (TM) is an exquisite structure that captures and transmits sound from the environment to the ossicular chain of the middle ear. The creation of TM grafts by multi-material three-dimensional (3D) printing may overcome limitations of current graft materials, e.g. temporalis muscle fascia, used for surgical reconstruction of the TM. TM graft scaffolds with either 8 or 16 circumferential and radial filament arrangements were fabricated by 3D printing of polydimethylsiloxane (PDMS), flex-polyactic acid (PLA) and polycaprolactone (PCL) materials followed by uniform infilling with a fibrin-collagen composite hydrogel. Digital opto-electronic holography (DOEH) and laser Doppler vibrometry (LDV) were used to measure acoustic properties including surface motions and velocity of TM grafts in response to sound. Mechanical properties were determined using dynamic mechanical analysis (DMA). Results were compared to fresh cadaveric human TMs and cadaveric temporalis fascia. Similar to the human TM, TM grafts exhibit simple surface motion patterns at lower frequencies (400 Hz), with a limited number of displacement maxima. At higher frequencies (>1000 Hz), their displacement patterns are highly organized with multiple areas of maximal displacement separated by regions of minimal displacement. By contrast, temporalis fascia exhibited asymmetric and less regular holographic patterns. Velocity across frequency sweeps (0.2-10 kHz) measured by LDV demonstrated consistent results for 3D printed grafts, while velocity for human fascia varied greatly between specimens. TM composite grafts of different scaffold print materials and varied filament count (8 or 16) displayed minimal, but measurable differences in DOEH and LDV at tested frequencies. TM graft mechanical load increased with higher filament count and is resilient over time, which differs from temporalis fascia, which loses over 70% of its load bearing properties during mechanical testing. This study demonstrates the design, fabrication and preliminary in vitro acoustic and mechanical evaluation of 3D printed TM grafts. Data illustrate the feasibility of creating TM grafts with acoustic properties that reflect sound induced motion patterns of the human TM; furthermore, 3D printed grafts have mechanical properties that demonstrate increased resistance to deformation compared to temporalis fascia.

Dataset Information

An ad hoc three dimensionally printed tool facilitates intraesophageal suturing in experimental surgery.

Publications

An ad hoc three dimensionally printed tool facilitates intraesophageal suturing in experimental surgery.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets