Dataset Information

Three-dimensionally printed surface features to anchor endoluminal spring for distraction enterogenesis.

ABSTRACT: Spring-mediated distraction enterogenesis has been studied as a novel treatment for short bowel syndrome (SBS). Previous approaches are limited by multiple surgeries to restore intestinal continuity. Purely endoluminal devices require a period of intestinal attachment for enterogenesis. The purpose of this study is to modify the device to prevent premature spring migration in a porcine model. Two models were created in juvenile mini-Yucatan pigs for the placement of three-dimensionally printed springs. (1) Two Roux-en-y jejunojenostomies with two Roux limbs were made. A spring with bidirectional hooked surface features was placed in one Roux limb and a spring with smooth surface was placed in the other Roux limb. (2) The in-continuity model had both hooked and smooth surface springs placed directly in intestinal continuity. Spring location was evaluated by weekly radiographs, and the intestine was retrieved after 2 to 4 weeks. Springs with smooth surfaces migrated between 1 to 3 weeks after placement in both porcine models. Springs with bidirectional hooked surface features were anchored to the intestine for up to 4 weeks without migration. Histologically, the jejunal architecture showed significantly increased crypt depth and muscularis thickness compared to normal jejunum. Bidirectional features printed on springs prevented the premature migration of endoluminal springs. These novel spring anchors allowed for their endoluminal placement without any sutures. This approach may lead to the endoscopic placement of the device for patients with SBS.

SUBMITTER: Huynh N

PROVIDER: S-EPMC6042758 | biostudies-literature | 2018

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Three-dimensionally printed surface features to anchor endoluminal spring for distraction enterogenesis.

Huynh Nhan N Dubrovsky Genia G Rouch Joshua D JD Scott Andrew A Chiang Elvin E Nguyen Tommy T Wu Benjamin M BM Shekherdimian Shant S Krummel Thomas M TM Dunn James C Y JCY

PloS one 20180712 7

Spring-mediated distraction enterogenesis has been studied as a novel treatment for short bowel syndrome (SBS). Previous approaches are limited by multiple surgeries to restore intestinal continuity. Purely endoluminal devices require a period of intestinal attachment for enterogenesis. The purpose of this study is to modify the device to prevent premature spring migration in a porcine model. Two models were created in juvenile mini-Yucatan pigs for the placement of three-dimensionally printed s ...[more]

PMID: 30001433

Similar Datasets

Project description:BACKGROUND:Autologous bone grafts remain a standard of care for the reconstruction of large bony defects, but limitations persist. The authors explored the bone regenerative capacity of customized, three-dimensionally printed bioactive ceramic scaffolds with dipyridamole, an adenosine A2A receptor indirect agonist known to enhance bone formation. METHODS:Critical-size bony defects (10-mm height, 10-mm length, full-thickness) were created at the mandibular rami of rabbits (n = 15). Defects were replaced by a custom-to-defect, three-dimensionally printed bioactive ceramic scaffold composed of ?-tricalcium phosphate. Scaffolds were uncoated (control), collagen-coated, or immersed in 100 ?M dipyridamole. At 8 weeks, animals were euthanized and the rami retrieved. Bone growth was assessed exclusively within scaffold pores, and evaluated by micro-computed tomography/advanced reconstruction software. Micro-computed tomographic quantification was calculated. Nondecalcified histology was performed. A general linear mixed model was performed to compare group means and 95 percent confidence intervals. RESULTS:Qualitative analysis did not show an inflammatory response. The control and collagen groups (12.3 ± 8.3 percent and 6.9 ± 8.3 percent bone occupancy of free space, respectively) had less bone growth, whereas the most bone growth was in the dipyridamole group (26.9 ± 10.7 percent); the difference was statistically significant (dipyridamole versus control, p < 0.03; dipyridamole versus collagen, p < 0.01 ). There was significantly more residual scaffold material for the collagen group relative to the dipyridamole group (p < 0.015), whereas the control group presented intermediate values (nonsignificant relative to both collagen and dipyridamole). Highly cellular and vascularized intramembranous-like bone healing was observed in all groups. CONCLUSION:Dipyridamole significantly increased the three-dimensionally printed bioactive ceramic scaffold's ability to regenerate bone in a thin bone defect environment.

Project description:The tympanic membrane (TM) is an exquisite structure that captures and transmits sound from the environment to the ossicular chain of the middle ear. The creation of TM grafts by multi-material three-dimensional (3D) printing may overcome limitations of current graft materials, e.g. temporalis muscle fascia, used for surgical reconstruction of the TM. TM graft scaffolds with either 8 or 16 circumferential and radial filament arrangements were fabricated by 3D printing of polydimethylsiloxane (PDMS), flex-polyactic acid (PLA) and polycaprolactone (PCL) materials followed by uniform infilling with a fibrin-collagen composite hydrogel. Digital opto-electronic holography (DOEH) and laser Doppler vibrometry (LDV) were used to measure acoustic properties including surface motions and velocity of TM grafts in response to sound. Mechanical properties were determined using dynamic mechanical analysis (DMA). Results were compared to fresh cadaveric human TMs and cadaveric temporalis fascia. Similar to the human TM, TM grafts exhibit simple surface motion patterns at lower frequencies (400 Hz), with a limited number of displacement maxima. At higher frequencies (>1000 Hz), their displacement patterns are highly organized with multiple areas of maximal displacement separated by regions of minimal displacement. By contrast, temporalis fascia exhibited asymmetric and less regular holographic patterns. Velocity across frequency sweeps (0.2-10 kHz) measured by LDV demonstrated consistent results for 3D printed grafts, while velocity for human fascia varied greatly between specimens. TM composite grafts of different scaffold print materials and varied filament count (8 or 16) displayed minimal, but measurable differences in DOEH and LDV at tested frequencies. TM graft mechanical load increased with higher filament count and is resilient over time, which differs from temporalis fascia, which loses over 70% of its load bearing properties during mechanical testing. This study demonstrates the design, fabrication and preliminary in vitro acoustic and mechanical evaluation of 3D printed TM grafts. Data illustrate the feasibility of creating TM grafts with acoustic properties that reflect sound induced motion patterns of the human TM; furthermore, 3D printed grafts have mechanical properties that demonstrate increased resistance to deformation compared to temporalis fascia.

Dataset Information

Three-dimensionally printed surface features to anchor endoluminal spring for distraction enterogenesis.

Publications

Three-dimensionally printed surface features to anchor endoluminal spring for distraction enterogenesis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets