Dataset Information

Phenol removal from aqueous solution using Citrullus colocynthis waste ash.

ABSTRACT: Phenol is a hazardous organic chemical that introduced into the environment by industrial and pharmaceutical discharges. As a versatile option for phenol removal, adsorption would be viable if it accompanying with low cost adsorbents. This article described a natural, very cheap and local available adsorbent for phenol removal. Phenol showed a high affinity to Citrullus colocynthis waste ash which mainly composed of SiO2 (41.6%), Al2O3 (17.3%) and MgO (15.9%). Up to 70% of phenol adsorbed in the first 30?min of agitation. The phenol removal was increased by increasing adsorbent dose (0.5-10?g/L) and decreasing pH (2-12) and pollutant concentration (10-100?mg/L). The positive value of ?H° in thermodynamic data (0.06) revealed that the process is endothermic. The high and positive value of ?S° (13.01) and negative values of ?G° (- 5.36 to - 7.28), showed a high affinity of phenol to the adsorbent and the spontaneous nature of the adsorption. Isotherm modelling revealed that the phenol molecules adsorbed in multilayer with the maximum adsorption capacity of 173.2?mg/g. The rate limiting step in the sorption process was chemisorption, based on the kinetic data.

SUBMITTER: Qasemi M

PROVIDER: S-EPMC5996314 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Phenol removal from aqueous solution using Citrullus colocynthis waste ash.

Qasemi Mehdi M Afsharnia Mojtaba M Zarei Ahmad A Najafpoor Ali Asghar AA Salari Samira S Shams Mahmoud M

Data in brief 20180319

Phenol is a hazardous organic chemical that introduced into the environment by industrial and pharmaceutical discharges. As a versatile option for phenol removal, adsorption would be viable if it accompanying with low cost adsorbents. This article described a natural, very cheap and local available adsorbent for phenol removal. Phenol showed a high affinity to Citrullus colocynthis waste ash which mainly composed of SiO2 (41.6%), Al2O3 (17.3%) and MgO (15. ...[more]

PMID: 29900216

Similar Datasets

Project description:Phenol and its derivatives are highly toxic chemicals and are widely used in various industrial applications. Therefore, the industrial wastewater streams must be treated to lower the concentration of phenol before discharge. At the same time, food waste has been a major environmental problem globally and the scientific community is eagerly seeking effective management solutions. The objective of this study was to understand the potential of utilizing food waste as a renewable and sustainable resource for the production of activated carbons for the removal of phenol from water streams. The food waste was pyrolyzed and physically activated by steam. The pyrolysis and activation conditions were optimized to obtain activated carbons with high surface area. The activated carbon with the highest surface area, 745 m2 g-1, was derived via activation at 950 °C for 1 h. A detailed characterization of the physicochemical and morphological properties of the activated carbons derived from food waste was performed and a comprehensive adsorption study was conducted to investigate the potential of using the activated carbons for phenol removal from water streams. The effects of pH, contact time, and initial concentration of phenol in water were studied and adsorption models were applied to experimental data to interpret the adsorption process. A remarkable phenol adsorption capacity of 568 mg g-1 was achieved. The results indicated that the pseudo-second-order kinetic model was better over the pseudo-second-order kinetic model to describe the kinetics of adsorption. The intraparticle diffusion model showed multiple regions, suggesting that the intraparticle diffusion was not the sole rate-controlling step of adsorption. The Langmuir isotherm model was the best model out of Freundlich, Temkin, and Dubinin-Radushkevich models to describe the phenol adsorption on activated carbons derived from food waste. This study demonstrated that food waste could be utilized to produce activated carbon and it showed promising capacity on phenol removal.

Project description:Phenolic compound even at low concentrations, are considered to be priority pollutants due to their significant toxicity. Electrospinning was used to create a polyacrylonitril (PAN) nanofiber, which was then impregnated with graphene oxide (GO). After a preliminary investigation into the electrospinning parameters (e.g., using various voltages and polymer concentrations), the electrospun nanofibres were tuned, this study evaluated the effectiveness of these materials in removing phenolic compounds from wastewater through adsorption. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to analyze the synthesized nanofiber mats. The scanning electron microscopy (SEM) analysis revealed that the structure of nanofiber mats was altered by the addition of graphene oxide (GO) in different ratios. Specifically, the surface of the fibres exhibited increased roughness, and the diameter of the fibres also experienced an increase. The average diameter of the fibres was measured to be (134.9 ± 21.43 nm) for the PAN/2.5% GO composite and (198 ± 33.94 nm) for the PAN/5% GO composite. FTIR spectra of the PAN/GO nanocomposites nanofiber displayed distinct peaks associated with graphene oxide (GO). These included a wide peak at 3400 cm-1, related to the presence of hydroxyl (O-H) groups, as well as peaks on 1600 as well as 1000 cm-1, which indicated the existence of epoxy groups. In this study response surface methodology (RSM) was implemented. To enhance the efficiency of removing substances, it is necessary to optimise parameters such as pH, contact time, and dosage of the adsorbent. The optimum pH for removing phenol via all nanofiber mats was determined to be 7, while at a dose of 2 mg dose adsorbents maximum removals for pure PAN, PAN/2.5 GO, and PAN/5 GO were 61.3941, 77.2118, and 92.76139%, respectively. All the adsorbents obey Langmuir isotherm model, and the empirical adsorption findings were fitted with the second-order model kinetically, also non-linear Elovich model. The maximal monolayer adsorption capacities for PAN, PAN/2.5 GO, and PAN/5 GO were found to be 57.4, 66.18, and 69.7 mg/g, respectively. Thermodynamic studies discovered that the adsorption of phenol on all adsorbents nanofiber mats was exothermic, the adsorption of phenol on nanofiber mats decreases as the temperature increases. All the adsorbents exhibit negative enthalpy and entropy. The PAN/GO composite's superior phenol removal suggested that it could be used as a latent adsorbent for efficient phenol removal from water and wastewater streams.

Dataset Information

Phenol removal from aqueous solution using Citrullus colocynthis waste ash.

Publications

Phenol removal from aqueous solution using <i>Citrullus colocynthis</i> waste ash.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets