Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Peak particle velocity data acquisition for monitoring blast induced earthquakes in quarry sites.

ABSTRACT: The peak particle velocity datasets recorded during quarry blasts in the neighborhood villages and towns in Ibadan and Abeokuta were processed and analyzed in order to recommend a safe blast design for each of the quarries. The minimum peak particle velocity of 48.27?mm/s was recorded near the foundation of the nearest residence at the shot to monitored distance of 500?m. The tendency of ground vibration emanating from the quarry sites to cause damage to the structures in the nearby dwelling areas is very high. The peak particle velocity datasets recorded were not within the safe limit. Therefore the peak particle velocity that will not exceed 35?mm/s is recommended for a safe blast design.

SUBMITTER: Hammed OS

PROVIDER: S-EPMC5997587 | biostudies-literature | 2018 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Peak particle velocity data acquisition for monitoring blast induced earthquakes in quarry sites.

Hammed O S OS Popoola O I OI Adetoyinbo A A AA Awoyemi M O MO Adagunodo T A TA Olubosede O O Bello A K AK

Data in brief 20180504

The peak particle velocity datasets recorded during quarry blasts in the neighborhood villages and towns in Ibadan and Abeokuta were processed and analyzed in order to recommend a safe blast design for each of the quarries. The minimum peak particle velocity of 48.27 mm/s was recorded near the foundation of the nearest residence at the shot to monitored distance of 500 m. The tendency of ground vibration emanating from the quarry sites to cause damage to the structures in the nearby dwelling are ...[more]

PMID: 29900336

Similar Datasets

Variable-Velocity Traveling-Wave Ion Mobility Separation Enhancing Peak Capacity for Data-Independent Acquisition Proteomics.

Project description:High mass accuracy, data-dependent acquisition is the current standard method in mass spectrometry-based peptide annotation and quantification. In high complexity samples, limited instrument scan speeds often result in under-sampling. In contrast, all-ion data-independent acquisition methods bypass precursor selection, alternating high and low collision energies to analyze product and precursor ions across wide mass ranges. Despite capturing data for all events, peptide annotation is limited by inadequate alignment algorithms or overlapping ions. Ion mobility separation can add an orthogonal analytical dimension, reducing ion interference to improve reproducibility, peak capacity, and peptide identifications to rival modern hybrid quadrupole orbitrap systems. Despite the advantages of ion mobility separation in complex proteomics analyses, there has been no quantitative measure of ion mobility resolution in a complex proteomic sample. Here, we present TWIMExtract, a data extraction tool to export defined slices of liquid chromatography/ion mobility/mass spectrometry (LC-IM-MS) data, providing a route to quantify ion mobility resolution from a commercial traveling-wave ion mobility time-of-flight mass spectrometer. Using standard traveling-wave ion mobility parameters (600 m/s, 40 V), 90% of the annotated peptides occupied just 23% of the ion mobility drift space, yet inclusion of ion mobility nearly doubled the overall peak capacity. Relative to fixed velocity traveling-wave ion mobility settings, ramping the traveling-wave velocity increased drift space occupancy, amplifying resolution by 16%, peak capacity by nearly 50%, and peptide/protein identifications by 40%. Overall, variable-velocity traveling-wave ion mobility-mass spectrometry significantly enhances proteomics analysis in all-ion fragmentation acquisition.

| S-EPMC5623091 | biostudies-literature

Efficient data acquisition with three-channel centerpieces in sedimentation velocity.

Project description:Three-channel 3D printed centerpieces with two sample sectors next to a joint solvent reference sector were recently described as a strategy to double the throughput of sedimentation velocity analytical ultracentrifugation experiments [Anal. Chem. 91 (2019) 5866-5873]. They are compatible with Rayleigh interference optical detection in commercial analytical ultracentrifuges, but require the rotor angles of data acquisition to be repeatedly adjusted during the experiment to record data from the two sample sectors. Here we present an approach to automate this data acquisition mode through the use of a secondary, general-purpose automation software, and an accompanying data pre-processing software for scan sorting.

| S-EPMC6768728 | biostudies-literature

Applying log-normal peak fitting to parallel reaction monitoring data analysis.

Project description:To support quantitative data analysis, we have developed a software, peakfit, that fits acquired chromatographic data to the log-normal peak equation and reports the calculated peak parameters. To demonstrate the capabilities of this approach, we provide hereby four example datasets: (1) 15 QCs of a PRM assay targeting the three most common isoforms of Apolipoprotein E (E2, E3, and E4); (2) PRM data of samples with 6 different ApoE phenotypes (E2/2, E2/3, E2/4, E3/3, E3/4, and E4/4); (3) shotgun run of a commercial HeLa digest to demonstrate processing of MS1 data, and (4) a quality control peptide mix to demonstrate assessment of chromatographic performance on basis of the base peak chromatogram.

2021-07-26 | PXD026875 | Pride

Analysis of adherence to peak flow monitoring when recording of data is electronic.

Project description: Not available

| S-EPMC64515 | biostudies-literature

Echocardiographic Progression of Peak Tricuspid Regurgitant Velocity Among Medicare Beneficiaries.

Project description:BackgroundPeak tricuspid regurgitant velocity (TRV) on transthoracic echocardiography (TTE) is a commonly obtained parameter and robust predictor of subsequent adverse clinical outcomes.ObjectivesThe purpose of this study was to determine the predictors and clinical significance of TRV progression.MethodsWe retrospectively linked consecutive outpatient TTE reports from our institution to 2005 to 2017 Medicare claims. Individuals with prior tricuspid surgery, endocarditis, tricuspid stenosis, missing TRV values, TTEs performed during inpatient hospitalization, or <2 TTEs were excluded.ResultsA total of 4,572 patients (mean age 67.8 ± 11.9 years, 50.4% female) received 13,273 TTEs over a median follow-up of 7.4 (IQR: 4.5-6.9) years. TRV increased by a mean of 0.23 (95% CI: 0.22 to 0.23 m/s/y, P < 0.001) (range, 0.01-0.80 m/s/y). Older age, depressed left ventricular ejection fraction, diabetes, hypertension, hyperlipidemia, atrial fibrillation, heart failure, and chronic kidney disease were associated with faster progression (all P < 0.05). Accounting for 23 demographic, clinical, and TTE variables, faster TRV progression was associated with a stepwise increased risk of all-cause mortality (TRV progression quartile 4 vs 1; adjusted HR: 2.17; 95% CI: 1.74-2.71; P < 0.001). Those with regression of TRV (n = 384 [8.4%]) had a lower mortality risk (adjusted HR: 0.40; 95% CI: 0.28-0.57; P < 0.001).ConclusionsIn this large, multidecade study of Medicare beneficiaries with serial TTEs performed in the outpatient setting, the mean rate of TRV progression was 0.23 m/s/y. Older age, left heart disease, and adverse metabolic features were associated with faster progression. Faster progression was associated with a graded risk for all-cause mortality.

| S-EPMC10583835 | biostudies-literature

Data Acquisition for Condition Monitoring in Tactical Vehicles: On-Board Computer Development.

Project description:This paper outlines the development of an onboard computer prototype for data registration, storage, transformation, and analysis. The system is intended for health and use monitoring systems in military tactical vehicles according to the North Atlantic Treaty Organization Standard Agreement for designing vehicle systems using an open architecture. The processor includes a data processing pipeline with three main modules. The first module captures the data received from sensor sources and vehicle network buses, performs a data fusion, and saves the data in a local database or sends them to a remote system for further analysis and fleet management. The second module provides filtering, translation, and interpretation for fault detection; this module will be completed in the future with a condition analysis module. The third module is a communication module for web serving data and data distribution systems according to the standards for interoperability. This development will allow us to analyze the driving performance for efficiency, which helps us to know the vehicle's condition; the development will also help us deliver information for better tactical decisions in mission systems. This development has been implemented using open software, allowing us to measure the amount of data registered and filter only the relevant data for mission systems, which avoids communication bottlenecks. The on-board pre-analysis will help to conduct condition-based maintenance approaches and fault forecasting using the on-board uploaded fault models, which are trained off-board using the collected data.

| S-EPMC10301766 | biostudies-literature

Particle velocity controls phase transitions in contagion dynamics.

Project description:Interactions often require the proximity between particles. The movement of particles, thus, drives the change of the neighbors which are located in their proximity, leading to a sequence of interactions. In pathogenic contagion, infections occur through proximal interactions, but at the same time, the movement facilitates the co-location of different strains. We analyze how the particle velocity impacts on the phase transitions on the contagion process of both a single infection and two cooperative infections. First, we identify an optimal velocity (close to half of the interaction range normalized by the recovery time) associated with the largest epidemic threshold, such that decreasing the velocity below the optimal value leads to larger outbreaks. Second, in the cooperative case, the system displays a continuous transition for low velocities, which becomes discontinuous for velocities of the order of three times the optimal velocity. Finally, we describe these characteristic regimes and explain the mechanisms driving the dynamics.

| S-EPMC6478726 | biostudies-literature

Fast Local Phase Velocity-Based Imaging: Shear Wave Particle Velocity and Displacement Motion Study.

Project description:Fast and precise noninvasive evaluation of tissue mechanical properties is of high importance in ultrasound shear wave elastography. In this study, we present an updated, faster version of the local phase velocity-based imaging (LPVI) method used to create images of local phase velocity in soft tissues. The updated LPVI implementation uses 1-D Fourier transforms in spatial dimensions separately in comparison to its original implementation. A directional filter is applied upon the shear wave field to extract the left-to-right (LR) and right-to-left (RL) propagating shear waves. A local shear wave phase velocity map is recovered based on both LR and RL waves. Finally, a 2-D shear wave velocity map is reconstructed by combining the LR and RL phase velocity maps. LPVI performance for shear wave displacement and velocity-wave motion data is examined. A study of LPVI used for only one data acquisition with multiple focused ultrasound push beams is presented. The lesion placement with respect to the pushes and whether two sequential pushes provided different results from two simultaneous radiation force pushes was investigated. The addition of white Gaussian noise to the wave motion data was also tested to examine the LPVI method's performance. Robust and accurate shear wave phase velocity maps are reconstructed using the proposed LPVI method using numerical tissue-mimicking phantoms with inclusions. Results from the numerical phantom study showed that the reconstructed, asymmetric inclusions, for various axial locations, are better preserved for shear wave particle velocity signals compared with particle displacement motion data.

| S-EPMC7123440 | biostudies-literature

Estimating peak height velocity in individuals: a comparison of statistical methods.

Project description:BackgroundEstimates pertaining to the timing of the adolescent growth spurt (e.g. peak height velocity; PHV), including age at peak height velocity (aPHV), play a critical role in the diagnosis, treatment, and management of skeletal growth and/or developmental disorders. Yet, distinct statistical methodologies often result in large estimate discrepancies.AimThe aim of the present study was to assess the advantages and disadvantages of three modelling methodologies for height as well as to determine how estimates derived from these methodologies may differ, particularly those that may be useful in paediatric clinical practice.Subjects and methodsHeight data from 686 individuals of the Fels Longitudinal Study were modelled using 5th order polynomials, natural cubic splines, and SuperImposition by Translation and Rotation (SITAR) to determine aPHV and PHV for all individuals together (i.e. population average) by sex and separately for each individual. Estimates within and between methodologies were calculated and compared.ResultsIn general, mean aPHV was earlier, and PHV was greater for individuals when compared to estimates from population average models. Significant differences between mean aPHV and PHV for individuals were observed in all three methodologies, with SITAR exhibiting the latest aPHV and largest PHV estimates.ConclusionEach statistical methodology has a number of advantages when used for specific purposes. For modelling growth in individuals, as one would in paediatric clinical practice, we recommend the use of the 5th order polynomial methodology due to its parameter flexibility.

| S-EPMC7590904 | biostudies-literature

Observed and predicted ages at peak height velocity in soccer players.

Project description:The purpose of the study was to evaluate predicted maturity offset (time before age at PHV) and age at PHV (chronological age [CA] minus maturity offset) in a longitudinal sample of 58 under-13 club level soccer players in central Portugal for whom ages at PHV were estimated with the SITAR model. Two maturity offset prediction equations were applied: the original equation which requires CA sitting height, estimated leg length, height and weight, and a modified equation which requires CA and height. Predicted maturity offset increased, on average, with CA at prediction throughout the age range considered, while variation in predicted maturity offset and ages at PHV within CA groups was considerably reduced compared to variation in observed ages at offset and at PHV. Predicted maturity offset and ages at PHV were consistently later than observed maturity offset and age at PHV among early maturing players, and earlier than observed in late maturing players. Both predicted offset and ages at PHV with the two equations were, on average, later than observed among players maturing on time. Intra-individual variation in predicted ages at PHV with each equation was considerable. The results for soccer players were consistent with similar studies in the general population and two recent longitudinal studies of soccer players. The results question the utility of predicted maturity offset and age at PHV as valid indicators of maturity timing and status.

| S-EPMC8312932 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data