Strategy for 90% autoverification of clinical chemistry and immunoassay test results using six sigma process improvement.
Ontology highlight
ABSTRACT:
SUBMITTER: Randell EW
PROVIDER: S-EPMC5998219 | biostudies-literature | 2018 Jun
REPOSITORIES: biostudies-literature
Publications
Strategy for 90% autoverification of clinical chemistry and immunoassay test results using six sigma process improvement.
Randell Edward W EW Short Garry G Lee Natasha N Beresford Allison A Spencer Margaret M Kennell Marina M Moores Zoë Z Parry David D
Data in brief 20180503
Six Sigma involves a structured process improvement strategy that places processes on a pathway to continued improvement. The data presented here summarizes a project that took three clinical laboratories from autoverification processes that allowed between about 40% to 60% of tests being auto-verified to more than 90% of tests and samples auto-verified. The project schedule, metrics and targets, a description of the previous system and detailed information on the changes made to achieve greater ...[more]
Similar Datasets
Project description:BackgroundThe Veterans Health Administration (VHA) developed a comprehensive mobile screening technology (eScreening) that provides customized and automated self-report health screening via mobile tablet for veterans seen in VHA settings. There is agreement about the value of health technology, but limited knowledge of how best to broadly implement and scale up health technologies. Quality improvement (QI) methods may offer solutions to overcome barriers related to broad scale implementation of technology in health systems. We aimed to develop a process guide for eScreening implementation in VHA clinics to automate self-report screening of mental health symptoms and psychosocial challenges.MethodsThis was a two-phase, mixed methods implementation project building on an adapted quality improvement method. In phase one, we adapted and conducted an RPIW to develop a generalizable process guide for eScreening implementation (eScreening Playbook). In phase two, we integrated the eScreening Playbook and RPIW with additional strategies of training and facilitation to create a multicomponent implementation strategy (MCIS) for eScreening. We then piloted the MCIS in two VHA sites. Quantitative eScreening pre-implementation survey data and qualitative implementation process "mini interviews" were collected from individuals at each of the two sites who participated in the implementation process. Survey data were characterized using descriptive statistics, and interview data were independently coded using a rapid qualitative analytic approach.ResultsPilot data showed overall satisfaction and usefulness of our MCIS approach and identified some challenges, solutions, and potential adaptations across sites. Both sites used the components of the MCIS, but site 2 elected not to include the RPIW. Survey data revealed positive responses related to eScreening from staff at both sites. Interview data exposed implementation challenges related to the technology, support, and education at both sites. Workflow and staffing resource challenges were only reported by site 2.ConclusionsOur use of RPIW and other QI methods to both develop a playbook and an implementation strategy for eScreening has created a testable implementation process to employ automated, patient-facing assessment. The efficient collection and communication of patient information have the potential to greatly improve access to and quality of healthcare.
| S-EPMC8028199 | biostudies-literature
Project description:BackgroundThe effect of centrifugation time of heparinized blood samples on clinical chemistry and immunology results has rarely been studied. WHO guideline proposed a 15 min centrifugation time without citing any scientific publications. The centrifugation time has a considerable impact on the turn-around-time.MethodsWe investigated 74 parameters in samples from 44 patients on a Roche Cobas 6000 system, to see whether there was a statistical significant difference in the test results among specimens centrifuged at 2180 g for 15 min, at 2180 g for 10 min or at 1870 g for 7 min, respectively. Two tubes with different plasma separators (both Greiner Bio-One) were used for each centrifugation condition. Statistical comparisons were made by Deming fit.ResultsTubes with different separators showed identical results in all parameters. Likewise, excellent correlations were found among tubes to which different centrifugation conditions were applied. Fifty percent of the slopes lay between 0.99 and 1.01. Only 3.6 percent of the statistical tests results fell outside the significance level of p < 0.05, which was less than the expected 5%. This suggests that the outliers are the result of random variation and the large number of statistical tests performed. Further, we found that our data are sufficient not to miss a biased test (beta error) with a probability of 0.10 to 0.05 in most parameters.ConclusionA centrifugation time of either 7 or 10 min provided identical test results compared to the time of 15 min as proposed by WHO under the conditions used in our study.
| S-EPMC3123263 | biostudies-literature
Project description:Background and purposeHemovigilance is a set of monitoring methods that covers the blood transfusion chain, from collecting blood and blood products to monitoring the blood recipients. To this end, any error in this process can have serious and irreparable consequences for patients. The present study aimed to investigate the quality of hemovigilance process in Iran, using the first two steps of Six Sigma model.MethodsThis was a quantitative cross-sectional study that was conducted over 6 months (from August 20, 2021, to February 20, 2022) at Afzalipour Hospital in Iran, using the first two steps of Six Sigma model. The study population comprised of all inpatients who needed blood or blood product transfusion in various departments of Afzalipour Hospital, among whom 477 patients were selected via stratified sampling in three shifts (morning, evening, and night). The datasheet was used to record errors in the three shifts. This research was conducted, using the DMAIC cycle's "define" and "measure" steps.ResultsIn the define step, the hemovigilance process at Afzalipour Hospital was divided into two categories of normal process and emergency process. Each of these processes consists of several sub-processes, including "phlebotomy," "requesting blood and blood products from the department," "preparation of application by the blood bank," " sending a request from the blood bank to the blood transfusion center," "transfusing blood and blood products," and "returning the blood and blood products to the blood bank and waste disposal." In the measure step, the quality of hemovigilance process was evaluated based on sub-processes and labels at morning, evening and night shifts. The sub-process of sending a request from the blood bank to the blood transfusion center had the highest error rate with a sigma level of 1.5. Also, the evening and night shifts had a sigma level of 1.875, and the clinical and registration labels had a sigma level of 1.875. The overall sigma level of hemovigilance process was calculated to be 2.ConclusionThe results of this study showed that the quality of hemovigilance process at Afzalipour Hospital was poor. By employing the first two steps of Six Sigma method, we identified the existing errors in the hemovigilance process of Afzalipour hospital in order to assist hospital managers to take the necessary measures to improve this process.
| S-EPMC10605775 | biostudies-literature
Project description:Quality is a key determinant in deploying new processes, products, or services and influences the adoption of emerging manufacturing technologies. The advent of additive manufacturing (AM) as a manufacturing process has the potential to revolutionize a host of enterprise-related functions from production to the supply chain. The unprecedented level of design flexibility and expanded functionality offered by AM, coupled with greatly reduced lead times, can potentially pave the way for mass customization. However, widespread application of AM is currently hampered by technical challenges in process repeatability and quality management. The breakthrough effect of six sigma (6S) has been demonstrated in traditional manufacturing industries (e.g., semiconductor and automotive industries) in the context of quality planning, control, and improvement through the intensive use of data, statistics, and optimization. 6S entails a data-driven DMAIC methodology of five steps-define, measure, analyze, improve, and control. Notwithstanding the sustained successes of the 6S knowledge body in a variety of established industries ranging from manufacturing, healthcare, logistics, and beyond, there is a dearth of concentrated application of 6S quality management approaches in the context of AM. In this article, we propose to design, develop, and implement the new DMAIC methodology for the 6S quality management of AM. First, we define the specific quality challenges arising from AM layerwise fabrication and mass customization (even one-of-a-kind production). Second, we present a review of AM metrology and sensing techniques, from materials through design, process, and environment, to postbuild inspection. Third, we contextualize a framework for realizing the full potential of data from AM systems and emphasize the need for analytical methods and tools. We propose and delineate the utility of new data-driven analytical methods, including deep learning, machine learning, and network science, to characterize and model the interrelationships between engineering design, machine setting, process variability, and final build quality. Fourth, we present the methodologies of ontology analytics, design of experiments (DOE), and simulation analysis for AM system improvements. In closing, new process control approaches are discussed to optimize the action plans, once an anomaly is detected, with specific consideration of lead time and energy consumption. We posit that this work will catalyze more in-depth investigations and multidisciplinary research efforts to accelerate the application of 6S quality management in AM.
| S-EPMC8269016 | biostudies-literature
Project description:ObjectivesThe error rate in the total testing process (TTP) of point-of-care (POC) glucose measurement remains high although a total quality management system has been applied. Quality indicators (QIs) in the TTP of glucose meter were established via risk assessment. Their two-year Six Sigma values were reviewed for quality improvement.DesignThe TTP of POC glucose measurement was mapped to identify risks in key steps. The risks were assessed for their frequency and severity of impact on patient safety. Whenever possible, measurable data from the data management system and other sources was collected to establish QIs for risk monitoring. Average Six Sigma value of each QI in the last two years was calculated for acceptance and for determining corrective action.Results29 risks were identified in eight key steps of the TTP. Eight QIs were established for monitoring six risks and three QIs for two accepted risks were established for improving operator testing skill. The QIs had a good coverage to key steps. Two, five and four QIs showed Six Sigma values <3, 3-4 and >4 respectively. Six Sigma values of two QIs related to quality control (QC) testing were improved by using meters with accurate QC sample loading.ConclusionsThe establishment of QIs for glucose measurement by risk assessment with measurable data from the data management system and on Six sigma scale was effective, efficient, and manageable. Most of QIs' Six Sigma values were between 3 and 5, which could be improved by using upgraded meters.
| S-EPMC8042413 | biostudies-literature
Project description:BACKGROUND: Recent focus on resident work hours has challenged residency programs to modify their curricula to meet established duty hour restrictions and fulfill their mission to develop the next generation of clinicians. Simultaneously, health care systems strive to deliver efficient, high-quality care to patients and families. The primary goal of this observational study was to use a data-driven approach to eliminate examples of waste and variation identified in resident rounding using Lean Six Sigma methodology. A secondary goal was to improve the efficiency of the rounding process, as measured by the reduction in nonvalue-added time. METHODS: We used the "DMAIC" methodology: define, measure, analyze, improve, and control. Pediatric and family medicine residents rotating on the pediatric hospitalist team participated in the observation phase. Residents, nurses, hospitalists, and parents of patients completed surveys to gauge their attitudes toward rounds. The Mann-Whitney test was used to test for differences in the median times measured during the preimprovement and postimprovement phases, and the Student t test was used for comparison of survey data. RESULTS AND DISCUSSION: Collaborative, family-centered rounding with elimination of the "prerounding" process, as well as standard work instructions and pacing the process to meet customer demand (takt time), were implemented. Nonvalue-added time per patient was reduced by 64% (P = .005). Survey data suggested that team members preferred the collaborative, family-centered approach to the traditional model of rounding. CONCLUSIONS: Lean Six Sigma provides tools, a philosophy, and a structured, data-driven approach to address a problem. In our case this facilitated an effort to adhere to duty hour restrictions while promoting education and quality care. Such approaches will become increasingly useful as health care delivery and education continue to transform.
| S-EPMC3184924 | biostudies-other
Project description:BackgroundInterpretation of changes in serial laboratory results is necessary for both clinicians and laboratories; however, setting decision limits is not easy. Although the reference change value (RCV) has been widely used for auto-verification, it has limitations in clinical settings. We introduce the concept of overlapping confidence intervals (CIs) to determine whether the changes are statistically significant in clinical chemistry laboratory test results.MethodsIn total, 1,202,096 paired results for 33 analytes routinely tested in our clinical chemistry laboratory were analyzed. The distributions of delta% absolute values and cut-off values for certain percentiles were calculated. The CIs for each analyte were set based on biological variation, and data were analyzed at various confidence levels. Additionally, we analyzed the data using RCVs and compared their clinical utility.ResultsMost analytes had low indexes of individuality with large inter-individual variability. The 97.5th percentile cut-offs for each analyte were much larger than conventional RCVs. The percentages of results exceeding RCV95% and RCV99% corresponded to those with no overlap at the 83.4% and 93.2% confidence levels, respectively.ConclusionsThe use of overlapping CIs in serial clinical chemistry test results can overcome the limitations of existing RCVs and replace them, especially for analytes with large intra-individual variation.
| S-EPMC6933068 | biostudies-literature
Project description:The purpose of this study is to apply the principles of statistical process control (SPC) in the context of patient specific intensity-modulated radiation therapy (IMRT) QA to set clinic-specific action limits and evaluate the impact of changes to the multileaf collimator (MLC) calibrations on IMRT QA results. Ten months of IMRT QA data with 247 patient QAs collected on three beam-matched linacs were retrospectively analyzed with a focus on the gamma pass rate (GPR) and the average ratio between the measured and planned doses. Initial control charts and action limits were calculated. Based on this data, changes were made to the leaf gap parameter for the MLCs to improve the consistency between linacs. This leaf gap parameter is tested monthly using a MLC sweep test. A follow-up dataset with 424 unique QAs were used to evaluate the impact of the leaf gap parameter change. The initial data average GPR was 98.6% with an SPC action limit of 93.7%. The average ratio of doses was 1.003, with an upper action limit of 1.017 and a lower action limit of 0.989. The sweep test results for the linacs were -1.8%, 0%, and +1.2% from nominal. After the adjustment of the leaf gap parameter, all sweep test results were within 0.4% of nominal. Subsequently, the average GPR was 99.4% with an SPC action limit of 97.3%. The average ratio of doses was 0.997 with an upper action limit of 1.011 and a lower action limit of 0.981. Applying the principles of SPC to IMRT QA allowed small differences between closely matched linacs to be identified and reduced. Ongoing analysis will monitor the process and be used to refine the clinical action limits for IMRT QA.
| S-EPMC5711098 | biostudies-literature
Project description:BackgroundThe Centers for Disease Control and Prevention (CDC) Guideline for Hand Hygiene in Health Care Settings was issued in 2002. In 2003, the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) established complying with the CDC Guideline as a National Patient Safety Goal for 2004. This goal has been maintained through 2006. The CDC's emphasis on the use of alcohol-based hand rubs (ABHRs) rather than soap and water was an opportunity to improve compliance, but the Guideline contained over 40 specific recommendations to implement.ObjectiveTo use the Six Sigma process to examine hand hygiene practices and increase compliance with the CDC hand hygiene recommendations required by JCAHO.DesignSix Sigma Project with pre-post design.ParticipantsPhysicians, nurses, and other staff working in 4 intensive care units at 3 hospitals.MeasurementsObserved compliance with 10 required hand hygiene practices, mass of ABHR used per month per 100 patient-days, and staff attitudes and perceptions regarding hand hygiene reported by questionnaire.ResultsObserved compliance increased from 47% to 80%, based on over 4,000 total observations. The mass of ABHR used per 100 patient-days in 3 intensive care units (ICUs) increased by 97%, 94%, and 70%; increases were sustained for 9 months. Self-reported compliance using the questionnaire did not change. Staff reported increased use of ABHR and increased satisfaction with hand hygiene practices and products.ConclusionsThe Six Sigma process was effective for organizing the knowledge, opinions, and actions of a group of professionals to implement the CDC's evidence-based hand hygiene practices in 4 ICUs. Several tools were developed for widespread use.
| S-EPMC2557134 | biostudies-literature
Project description:ObjectivesSix-minute walk test in dialysis population hasn't been consistently evaluated for the isolated impact of renal failure and other predictive factors. We measured six-minute walk distance in patients representative for low level of comorbidity and searched for potentially modifiable predictive factors of performance and dyspnea.MethodsThis was a cross-sectional study with hemodialysis patients (N = 90) and control subjects (N = 140).Main outcome measuressix-minute walk test distance and dyspnea severity using the 10-item Borg scale.ResultsMedian distance decreased from 600m below the 6th decade to 420m in the 8th decade of age. Dialysis dependence predicted 101.5m shorter distance in the adjusted model that explained 70% of variability in results. Adjusted for significant covariates of age, height and spontaneous gait speed, fat mass (but not lean body mass) and serum total iron binding capacity were significantly associated with distance (95% CI for B coefficients -4.6 to -1.4 m/kg and 0.1 to 5 m/μmol/l, respectively). Serum total iron binding capacity as an explanatory variable was superior to C-reactive protein and albumin. Dialysis dependence, odds ratio (OR) 2.97 (1.11-7.94), spontaneous gait speed, OR 0.08 (0.02-0.41), rate-pressure product, OR 1.15 (1.08-1.23) and hemoglobin, OR 0.95 (0.92-0.98) predicted dyspnea in the adjusted model.ConclusionsRenal failure without the confounding effect of comorbidity is a significant negative predictor of performance at six-minute walk test and perceived level of dyspnea. Body fat mass and serum total iron binding capacity are the main potentially modifiable predictors of performance, total iron binding capacity being superior to C-reactive protein and albumin. Although hemoglobin is not associated with test performance, it negatively predicts perceived shortness of breath.
| S-EPMC4794199 | biostudies-literature