Dataset Information

Crystal structures of four new iridium complexes, each containing a highly flexible carbodi-phos-phorane PCP pincer ligand.

ABSTRACT: Compound [Ir(C8H12)(C51H45P4)]Cl2 or [Ir(cod)(CH(dppm)2-?3P,C,P)]Cl2 (1a), was obtained from [IrCl(cod)]2 and the carbodi-phospho-rane (CDP) salt [CH(dppm)2]Cl [where cod = cyclo-octa-1,5-diene and dppm = bis-(di-phenyl-phosphino)methane]. Treatment of 1a with thallium(I) tri-fluoro-methane-sulfonate [Tl(OTf)] and subsequent crystallization gave complex [Ir(C8H12)(C51H45P4)](OTf)2·CH3CO2C2H5·CH2Cl2 or [Ir(cod)(CH(dppm)2-?3P,C,P)](OTf)2·CH3CO2C2H5·CH2Cl2 (1b) [systematic name: (cyclo-octa-1,5-diene)(1,1,3,3,5,5,7,7-octa-phenyl-1,7-diphospha-3,5-di-phospho-niaheptan-4-yl)iridium(I) bis-(tri-fluoro-methane-sulfonate)-ethyl acetate-di-chloro-methane (1/1/1)]. This five-coordinate iridium(I) complex cation adopts a trigonal-bipyramidal geometry with the CDP carbon and one cod double bond in axial sites. Compound 1b represents the first example of a non-meridional coordination of the PCP pincer ligand [CH(dppm)2]+ with a P-Ir-P angle of 98.08?(2)°. Compound 2, [IrCl2H(C51H44P4)]·(CH3)2CO or [IrCl2H(C(dppm)2-?3P,C,P)]·(CH3)2CO [systematic name: di-chlorido-hydrido(1,1,3,3,5,5,7,7-octa-phenyl-1,5?5,7-triphospha-3-phospho-niahept-4-en-4-yl)iridium(III) acetone monosolvate], crystallizes as an acetone monosolvate. It is a six-coordinate IrIII coordination compound. Here, the PCP pincer ligand is coordinated in a meridional manner; one chlorido ligand is positioned trans to the carbon donor, the remaining two coordination sites being occupied by the second chlorido and a hydrido ligand trans to each other. Complex 3, [IrCl2H(C51H45P4)]Cl·5H2O or [IrCl2H(CH(dppm)2-?3P,C,P)]Cl·5H2O [systematic name: di-chlorido-hydrido(1,1,3,3,5,5,7,7-octa-phenyl-1,7-diphospha-3,5-di-phospho-niaheptan-4-yl)iridium(III) chloride penta-hydrate], represents the conjugate CH acid of 2. The ligand [CH(dppm)2]+ is coordinated in a meridional manner. In the cationic six-coordinate IrIII complex 4, [IrClH(CO)(C51H44P4)]Cl·2CH3OH·H2O or [IrClH(CO)(C(dppm)2-?3P,C,P)]Cl·2CH3OH·H2O [systematic name: carbonyl-chlorido-hydrido(1,1,3,3,5,5,7,7-octa-phenyl-1,5?5,7-triphospha-3-phos-pho-niahept-4-en-4-yl)iridium(III) chloride-methanol-water (1/2/1)], the chlorido ligand is found in the plane defined by the Ir center and the meridional PCP ligand; the H and CO ligands are positioned axially to this plane and trans to each other.

SUBMITTER: Partl GJ

PROVIDER: S-EPMC6002832 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Crystal structures of four new iridium complexes, each containing a highly flexible carbodi-phos-phorane PCP pincer ligand.

Partl Gabriel Julian GJ Nussbaumer Felix F Schlapp-Hackl Inge I Schuh Walter W Kopacka Holger H Wurst Klaus K Peringer Paul P

Acta crystallographica. Section E, Crystallographic communications 20180525 Pt 6

Compound [Ir(C8H12)(C51H45P4)]Cl2 or [Ir(cod)(CH(dppm)2-κ3P,C,P)]Cl2 (1a), was obtained from [IrCl(cod)]2 and the carbodi-phospho-rane (CDP) salt [CH(dppm)2]Cl [where cod = cyclo-octa-1,5-diene and dppm = bis-(di-phenyl-phosphino)methane]. Treatment of 1a with thallium(I) tri-fluoro-methane-sulfonate [Tl(OTf)] and subsequent crystallization g ...[more]

PMID: 29951243

Similar Datasets

Project description:The structure of [Ir{(4-Cl-C6H4N3)C(dppm)-κ3 P,C,N}(dppm-κ2 P,P')]Cl·1.5CH2Cl2·0.5C7H8 (C57H48Cl2IrN3P4·1.5CH2Cl2·0.5C7H8) (2), dppm = bis-(di-phenyl-phosphino)methane {systematic name: [7-(4-chloro-phen-yl)-1,1,3,3-tetra-phenyl-5,6,7-tri-aza-κN 7-1,3λ4-diphospha-κP 1-hepta-4,6-dien-4-yl][methyl-ene-bis(di-phenyl-phosphine)-κ2 P,P']iridium(I) chloride-di-chloro-methane-toluene (2/3/1)}, resulting from the reaction of [IrClH{C(dppm)2-κ3 P,C,P)(MeCN)]Cl (1a) with 1-azido-4-chloro-benzene, shows a monocationic five-coordinate IrI complex with a distorted trigonal-bipyramidal geometry. In 2, the iridium centre is coordinated by the neutral triazeneyl-idene-phospho-rane (4-Cl-C6H4N3)C(dppm) acting as a PCN pincer ligand, and a chelating dppm unit. The structure of the coordination compound [IrCl(CN)H(C(dppm)2-κ3 P,C,P)]·CH3CN, (C52H45ClIrNP4·CH3CN) (1b) [systematic name: chlorido-cyanidohydrido(1,1,3,3,5,5,7,7-octa-phenyl-1,3λ5,5λ4,7-tetra-phospha-κ2 P 1,P 7-hept-3-en-4-yl)iridium(III) aceto-nitrile monosolvate], prepared from 1a and KCN, reveals an octa-hedral IrIII central atom with a meridional PCP pincer carbodi-phospho-rane (CDP) ligand; the chloride ligand is located trans to the central carbon of the CDP functionality while the hydrido and cyanido ligands are situated trans to each other. The chiral coordination compound [Ir(CN)((4-Cl-C6H4N3)CH(CH(P(Ph)2)2)-κ3 P,C,N)(dppm-κ2 P,P')]·2CH3OH, (C58H48ClIrN4P4·2CH3OH) (3) (systematic name: {4-[3-(4-chloro-phen-yl)triazenido-κN 3]-1,1,3,3-tetra-phenyl-1,3λ5-diphospha-κP 1-but-2-en-4-yl}cyanido[methyl-enebis(di-phenyl-phosphine)-κ2 P,P']iridium(III) methanol disolvate), formed via prolonged reaction of 1-azido-4-chloro-benzene with 1b, features a six-coordinate IrIII central atom. The iridium centre is coordinated by the dianionic facial PCN pincer ligand [(4-Cl-C6H4N3)CH(CH(P(Ph2)2)2)], a cyanido ligand trans to the central carbon of the PCN pincer ligand and a chelating dppm unit. Complex 2 exhibits a 2:1 positional disorder of the Cl- anion. The CH2Cl2 and C7H8 solvent mol-ecules show occupational disorder, with the toluene mol-ecule exhibiting additional 1:1 positional disorder with some nearly overlying carbon atoms.

Project description:The 15e square-planar complexes [Co(PCPMe-iPr)Cl] (2a) and [Co(PCP-tBu)Cl] (2b), respectively, react readily with NaBH4 to afford complexes [Co(PCPMe-iPr)(?2-BH4)] (4a) and [Co(PCP-tBu)(?2-BH4)] (4b) in high yields, as confirmed by IR spectroscopy, X-ray crystallography, and elemental analysis. The borohydride ligand is symmetrically bound to the cobalt center in ?2-fashion. These compounds are paramagnetic with effective magnetic moments of 2.0(1) and 2.1(1) ?B consistent with a d7 low-spin system corresponding to one unpaired electron. None of these complexes reacted with CO2 to give formate complexes. For structural and reactivity comparisons, we prepared the analogous Ni(II) borohydride complex [Ni(PCPMe-iPr)(?2-BH4)] (5) via two different synthetic routes. One utilizes [Ni(PCPMe-iPr)Cl] (3) and NaBH4, the second one makes use of the hydride complex [Ni(PCPMe-iPr)H] (6) and BH3·THF. In both cases, 5 is obtained in high yields. In contrast to 4a and 4b, the borohydride ligand is asymmetrically bound to the nickel center but still in an ?2-mode. [Ni(PCPMe-iPr)(?2-BH4)] (5) loses readily BH3 at elevated temperatures in the presence of NEt3 to form 6. Complexes 5 and 6 are both diamagnetic and were characterized by a combination of 1H, 13C{1H}, and 31P{1H} NMR, IR spectroscopy, and elemental analysis. Additionally, the structure of these compounds was established by X-ray crystallography. Complexes 5 and 6 react with CO2 to give the formate complex [Ni(PCPMe-iPr)(OC(C=O)H] (7). The extrusion of BH3 from [Co(PCPMe-iPr)(?2-BH4)] (4a) and [Ni(PCPMe-iPr)(?2-BH4)] (5) with the aid of NH3 to yield the respective hydride complexes [Co(PCPMe-iPr)H] and [Ni(PCPMe-iPr)H] (6) and BH3NH3 was investigated by DFT calculations showing that formation of the Ni hydride is thermodynamically favorable, whereas the formation of the Co(II) hydride, in agreement with the experiment, is unfavorable. The electronic structures and the bonding of the borohydride ligand in [Co(PCPMe-iPr)(?2-BH4)] (4a) and [Ni(PCPMe-iPr)(?2-BH4)] (5) were established by DFT computations.

Project description:The mechanism for the borylation of an aromatic substrate by a cobalt pincer complex was investigated by density functional theory calculations. Experimental observations identified trans-(iPrPNP)CoH2(BPin) as the resting state in the borylation of five-membered heteroarenes, and 4-BPin-(iPrPNP)Co(N2)BPin as the resting state in the catalytic borylation of arene substrates. The active species, 4-R-(iPrPNP)CoBPin (R=H, BPin), were generated by reductive elimination of H2 in the former, through Berry pseudorotation to the cis isomer, and N2 loss in the latter. The catalytic mechanism of the resulting Co(I) complex was computed to involve three main steps: C-H oxidative addition of the aromatic substrate (C6H6), reductive elimination of PhBPin, and regeneration of the active complex. The oxidative addition product formed through the most favorable pathway, where the breaking C-H bond of C6H6 is parallel to a line between the two phosphine atoms, leaves the complex with a distorted PNP ligand, which rearranges to a more stable complex via dissociation and re-association of HBPin. Alternative pathways, ?-bond metathesis and the oxidative addition in which the breaking C-H bond is parallel to the Co-B bond, are predicted to be unlikely for this Co(I) complex. The thermodynamically favorable formation of the product PhBPin via reductive elimination drives the reaction forward. The active species regenerates through the oxidative addition of B2Pin2 and reductive elimination of HBPin. In the overall reaction, the flipping (refolding) of the five-membered phosphine rings, which connects the species with two phosphine rings folded in the same direction and that with them folded in different directions, is found to play an important role in the catalytic process, as it relieves steric crowding within the PNP ligand and opens Co coordination space. Metal-ligand cooperation based on the ligand's aromatization/dearomatization, a common mechanism for heavy-metal pincer complexes, and the dissociation of one phosphine ligand, do not apply in this system. This study provides guidance for understanding important features of pincer ligands with first-transition-row metals that differ from those in heavier metal complexes.

Dataset Information

Crystal structures of four new iridium complexes, each containing a highly flexible carbodi-phos-phorane PCP pincer ligand.

Publications

Crystal structures of four new iridium complexes, each containing a highly flexible carbodi-phos-phorane PCP pincer ligand.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets