Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Two-step breakdown of a SiN membrane for nanopore fabrication: Formation of thin portion and penetration.

ABSTRACT: For the nanopore sensing of various large molecules, such as probe-labelled DNA and antigen-antibody complexes, the nanopore size has to be customized for each target molecule. The recently developed nanopore fabrication method utilizing dielectric breakdown of a membrane is simple and quite inexpensive, but it is somewhat unsuitable for the stable fabrication of a single large nanopore due to the risk of generating multiple nanopores. To overcome this bottleneck, we propose a new technique called "two-step breakdown" (TSB). In the first step of TSB, a local conductive thin portion (not a nanopore) is formed in the membrane by dielectric breakdown. In the second step, the created thin portion is penetrated by voltage pulses whose polarity is opposite to the polarity of the voltage used in the first step. By applying TSB to a 20-nm-thick SiN membrane, a single nanopore with a diameter of 21-26?nm could be fabricated with a high yield of 83%.

SUBMITTER: Yanagi I

PROVIDER: S-EPMC6031669 | biostudies-literature | 2018 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Two-step breakdown of a SiN membrane for nanopore fabrication: Formation of thin portion and penetration.

Yanagi Itaru I Hamamura Hirotaka H Akahori Rena R Takeda Ken-Ichi KI

Scientific reports 20180704 1

For the nanopore sensing of various large molecules, such as probe-labelled DNA and antigen-antibody complexes, the nanopore size has to be customized for each target molecule. The recently developed nanopore fabrication method utilizing dielectric breakdown of a membrane is simple and quite inexpensive, but it is somewhat unsuitable for the stable fabrication of a single large nanopore due to the risk of generating multiple nanopores. To overcome this bottleneck, we propose a new technique call ...[more]

PMID: 29973672

Similar Datasets

Nanopore fabrication by controlled dielectric breakdown.

Project description:Nanofabrication techniques for achieving dimensional control at the nanometer scale are generally equipment-intensive and time-consuming. The use of energetic beams of electrons or ions has placed the fabrication of nanopores in thin solid-state membranes within reach of some academic laboratories, yet these tools are not accessible to many researchers and are poorly suited for mass-production. Here we describe a fast and simple approach for fabricating a single nanopore down to 2-nm in size with sub-nm precision, directly in solution, by controlling dielectric breakdown at the nanoscale. The method relies on applying a voltage across an insulating membrane to generate a high electric field, while monitoring the induced leakage current. We show that nanopores fabricated by this method produce clear electrical signals from translocating DNA molecules. Considering the tremendous reduction in complexity and cost, we envision this fabrication strategy would not only benefit researchers from the physical and life sciences interested in gaining reliable access to solid-state nanopores, but may provide a path towards manufacturing of nanopore-based biotechnologies.

| S-EPMC3962464 | biostudies-literature

Lithography-based fabrication of nanopore arrays in freestanding SiN and graphene membranes.

Project description:We report a simple and scalable technique for the fabrication of nanopore arrays on freestanding SiN and graphene membranes based on electron-beam lithography and reactive ion etching. By controlling the dose of the single-shot electron-beam exposure, circular nanopores of any size down to 16 nm in diameter can be fabricated in both materials at high accuracy and precision. We demonstrate the sensing capabilities of these nanopores by translocating dsDNA through pores fabricated using this method, and find signal-to-noise characteristics on par with transmission-electron-microscope-drilled nanopores. This versatile lithography-based approach allows for the high-throughput manufacturing of nanopores and can in principle be used on any substrate, in particular membranes made out of transferable two-dimensional materials.

| S-EPMC5997186 | biostudies-literature

Fabrication of Solid State Nanopore in Thin Silicon Membrane Using Low Cost Multistep Chemical Etching.

Project description:Nanopore-based analysis is currently an area of great interest in many disciplines with the potential for exceptionally versatile applications in medicine. This work presents a novel step towards fabrication of a single solid-state nanopore (SSSN) in a thin silicon membrane. Silicon nanopores are realized using multistep processes on both sides of n-type silicon-on-insulator (SOI) <100> wafer with resistivity 1-4 Ω·cm. An electrochemical HF etch with low current density (0.47 mA/cm²) is employed to produce SSSN. Blue LED is considered to emit light in a narrow band region which facilitates the etching procedure in a unilateral direction. This helps in production of straight nanopores in n-type Si. Additionally, a variety of pore diameters are demonstrated using different HF concentrations. Atomic force microscopy is used to demonstrate the surface morphology of the fabricated pores in non-contact mode. Pore edges exhibit a pronounced rounded shape and can offer high stability to fluidic artificial lipid bilayer to study membrane proteins. Electrochemically-fabricated SSSN has excellent smoothness and potential applications in diagnostics and pharmaceutical research on transmembrane proteins and label free detection.

| S-EPMC5458877 | biostudies-other

Integrated solid-state nanopore platform for nanopore fabrication via dielectric breakdown, DNA-speed deceleration and noise reduction.

Project description:The practical use of solid-state nanopores for DNA sequencing requires easy fabrication of the nanopores, reduction of the DNA movement speed and reduction of the ionic current noise. Here, we report an integrated nanopore platform with a nanobead structure that decelerates DNA movement and an insulating polyimide layer that reduces noise. To enable rapid nanopore fabrication, we introduced a controlled dielectric breakdown (CDB) process into our system. DNA translocation experiments revealed that single nanopores were created by the CDB process without sacrificing performance in reducing DNA movement speed by up to 10??s/base or reducing noise up to 600 pArms at 1?MHz. Our platform provides the essential components for proceeding to the next step in the process of DNA sequencing.

| S-EPMC4976334 | biostudies-literature

Fabrication of multiple nanopores in a SiNx membrane via controlled breakdown.

Project description:This paper reports a controlled breakdown (CBD) method to fabricate multiple nanopores in a silicon nitride (SiNx) membrane with control over both nanopore count and nanopore diameter. Despite the stochastic process of the breakdown, we found that the nanopores created via CBD, tend to be of the same diameter. We propose a membrane resistance model to explain and control the multiple nanopores forming in the membrane. We prove that the membrane resistance can reflect the number of nanopores in the membrane and that the diameter of the nanopores is controlled by the exposure time and strength of the electric field. This controllable multiple nanopore formation via CBD avoids the utilization of complicated instruments and time-intensive manufacturing. We anticipate CBD has the potential to become a nanopore fabrication technique which, integrated into an optical setup, could be used as a high-throughput and multichannel characterization technique.

| S-EPMC5775244 | biostudies-literature

Monolithic Fabrication of NPN/SiNx Dual Membrane Cavity for Nanopore-based DNA Sensing.

Project description:Nanoscale preconfinement of DNA has been shown to reduce the variation of passage times through solid-state nanopores. Preconfinement has been previously achieved by forming a femtoliter-sized cavity capped with a highly porous layer of nanoporous silicon nitride (NPN). This cavity was formed by sealing a NPN nanofilter membrane against a substrate chip using water vapor delamination. Ultimately, this method of fabrication cannot keep a consistent spacing between the filter and solid-state nanopore due to thermal fluctuations and wrinkles in the membrane, nor can it be fabricated on thousands of individual devices reliably. To overcome these issues, we present a method to fabricate the femtoliter cavity monolithically, using a selective XeF2 etch to hollow out a polysilicon spacer sandwiched between silicon nitride layers. These monolithically fabricated cavities behave identically to their counterparts formed by vapor delamination, exhibiting similar translocation passage time variation reduction and folding suppression of DNA without requiring extensive manual assembly. The ability to form nanocavity sensors with nanometer-scale precision and to reliably manufacture them at scale using batch wafer processing techniques will find numerous applications, including motion control of polymers for single-molecule detection applications, filtering of dirty samples prior to nanopore detection, and simple fabrication of single-molecule nanobioreactors.

| S-EPMC7310959 | biostudies-literature

Stable fabrication of a large nanopore by controlled dielectric breakdown in a high-pH solution for the detection of various-sized molecules.

Project description:For nanopore sensing of various-sized molecules with high sensitivity, the size of the nanopore should be adjusted according to the size of each target molecule. For solid-state nanopores, a simple and inexpensive nanopore fabrication method utilizing dielectric breakdown of a membrane is widely used. This method is suitable for fabricating a small nanopore. However, it suffers two serious problems when attempting to fabricate a large nanopore: the generation of multiple nanopores and the non-opening failure of a nanopore. In this study, we found that nanopore fabrication by dielectric breakdown of a SiN membrane under high-pH conditions (pH???11.3) could overcome these two problems and enabled the formation of a single large nanopore up to 40?nm in diameter within one minute. Moreover, the ionic-current blockades derived from streptavidin-labelled and non-labelled DNA passing through the fabricated nanopore were clearly distinguished. The current blockades caused by streptavidin-labelled DNA could be identified even when its concentration is 1% of the total DNA.

| S-EPMC6739384 | biostudies-literature

One-step fabrication of porous GaN crystal membrane and its application in energy storage.

Project description:Single-crystal gallium nitride (GaN) membranes have great potential for a variety of applications. However, fabrication of single-crystalline GaN membranes remains a challenge owing to its chemical inertness and mechanical hardness. This study prepares large-area, free-standing, and single-crystalline porous GaN membranes using a one-step high-temperature annealing technique for the first time. A promising separation model is proposed through a comprehensive study that combines thermodynamic theories analysis and experiments. Porous GaN crystal membrane is processed into supercapacitors, which exhibit stable cycling life, high-rate capability, and ultrahigh power density, to complete proof-of-concept demonstration of new energy storage application. Our results contribute to the study of GaN crystal membranes into a new stage related to the elelctrochemical energy storage application.

| S-EPMC5345049 | biostudies-literature

Prevention of Dielectric Breakdown of Nanopore Membranes by Charge Neutralization.

Project description:To achieve DNA sequencing using a solid-state nanopore, it is necessary to reduce the electric noise current. The noise current can be decreased by reducing the capacitance (C) of the nanopore device. However, we found that an electric-charge difference (?Q) between the electrolyte in one chamber and the electrolyte in another chamber occurred. For low capacitance devices, this electric-charge imbalance can lead to unexpectedly high voltage (?V = ?Q/C) which disrupted the membrane when the two electrolytes were independently poured into the chambers. We elucidated the mechanism for the generation of initial defects and established new procedures for preventing the generation of defects by connecting an electric bypass between the chambers.

| S-EPMC4669463 | biostudies-literature

Role of ?-synuclein penetration into the membrane in the mechanisms of oligomer pore formation.

Project description:Parkinson's disease (PD) and dementia with Lewy bodies are common disorders of the aging population and characterized by the progressive accumulation of ?-synuclein (?-syn) in the central nervous system. Aggregation of ?-syn into oligomers with a ring-like appearance has been proposed to play a role in toxicity. However, the molecular mechanisms and the potential sequence of events involved in the formation of pore-like structures are unclear. We utilized computer modeling and cell-based studies to investigate the process of oligomerization of wild-type and A53T mutant ?-syn in membranes. The studies suggest that ?-syn penetrates the membrane rapidly, changing its conformation from ?-helical towards a coiled structure. This penetration facilitates the incorporation of additional ?-syn monomers in the complex, and the subsequent displacement of phospholipids and the formation of oligomers in the membrane. This process occurred more rapidly, and with a more favorable energy of interaction, for mutant A53T compared with wild-type ?-syn. After 4 ns of simulation of the protein-membrane model, ?-syn had penetrated through two-thirds of the membrane. By 9 ns, the penetration of the annular ?-syn oligomers can result in the formation of pore-like structures that fully perforate the lipid bilayer. Experimental incubation of recombinant ?-syn in synthetic membranes resulted in the formation of similar pore-like complexes. Moreover, mutant (A53T) ?-syn had a greater tendency to accumulate in neuronal membrane fractions in cell cultures, resulting in greater neuronal permeability, as demonstrated with the calcein efflux assay. These studies provide a sequential molecular explanation for the process of ?-syn oligomerization in the membrane, and support the role of formation of pore-like structures in the pathogenesis of the neurodegenerative process in PD.

| S-EPMC3925782 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data