Dataset Information

Passive remote sensing of aerosol layer height using near-UV multi-angle polarization measurements.

ABSTRACT: We demonstrate that multi-angle polarization measurements in the near-UV and blue part of the spectrum are very well suited for passive remote sensing of aerosol layer height. For this purpose we use simulated measurements with different set-ups (different wavelength ranges, with and without polarization, different polarimetric accuracies) as well as airborne measurements from the Research Scanning Polarimeter (RSP) obtained over the continental USA. We find good agreement of the retrieved aerosol layer height from RSP with measurements from the Cloud Physics Lidar (CPL) showing a mean absolute difference of less than 1 km. Furthermore, we found that the information on aerosol layer height is provided for large part by the multi-angle polarization measurements with high accuracy rather than the multi-angle intensity measurements. The information on aerosol layer height is significantly decreased when the shortest RSP wavelength (410 nm) is excluded from the retrieval and is virtually absent when 550 nm is used as shortest wavelength.

SUBMITTER: Wu L

PROVIDER: S-EPMC6038705 | biostudies-literature | 2016 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Passive remote sensing of aerosol layer height using near-UV multi-angle polarization measurements.

Wu Lianghai L Hasekamp Otto O van Diedenhoven Bastiaan B Cairns Brian B Yorks John E JE Chowdhary Jacek J

Geophysical research letters 20160811 16

We demonstrate that multi-angle polarization measurements in the near-UV and blue part of the spectrum are very well suited for passive remote sensing of aerosol layer height. For this purpose we use simulated measurements with different set-ups (different wavelength ranges, with and without polarization, different polarimetric accuracies) as well as airborne measurements from the Research Scanning Polarimeter (RSP) obtained over the continental USA. We find good agreement of the retrieved aeros ...[more]

PMID: 30002565

Similar Datasets

Project description:Objectives:In an occupational environment, passive sampling could be an alternative to active sampling with pumps for sampling of dust. One passive sampler is the University of North Carolina passive aerosol sampler (UNC sampler). It is often analysed by microscopic imaging. Promising results have been shown for particles above 2.5 µm, but indicate large underestimations for PM2.5. The aim of this study was to evaluate, and possibly improve, the UNC sampler for stationary sampling in a working environment. Methods:Sampling was carried out at 8-h intervals during 24 h in four locations in an open pit mine with UNC samplers, respirable cyclones, PM10 and PM2.5 impactors, and an aerodynamic particle sizer (APS). The wind was minimal. For quantification, two modifications of the UNC sampler analysis model, UNC sampler with hybrid model and UNC sampler with area factor, were compared with the original one, UNC sampler with mesh factor derived from wind tunnel experiments. The effect of increased resolution for the microscopic imaging was examined. Results:Use of the area factor and a higher resolution eliminated the underestimation for PM10 and PM2.5. The model with area factor had the overall lowest deviation versus the impactor and the cyclone. The intraclass correlation (ICC) showed that the UNC sampler had a higher precision and better ability to distinguish between different exposure levels compared to the cyclone (ICC: 0.51 versus 0.24), but lower precision compared to the impactor (PM10: 0.79 versus 0.99; PM2.5: 0.30 versus 0.45). The particle size distributions as calculated from the different UNC sampler analysis models were visually compared with the distributions determined by APS. The distributions were obviously different when the UNC sampler with mesh factor was used but came to a reasonable agreement when the area factor was used. Conclusions:High resolution combined with a factor based on area only, results in no underestimation of small particles compared to impactors and cyclones and a better agreement with the APS's particle size distributions. The UNC sampler had lower precision than the impactors, but higher than the respirable cyclone. The UNC sampler with area factor could be used for PM2.5, PM10 and respirable fraction measurements in this working environment without wind.

Project description:IntroductionDirect emissions of nicotine and harmful chemicals from electronic cigarettes (e-cigarettes) have been intensively studied, but secondhand and thirdhand e-cigarette aerosol (THA) exposures in indoor environments are understudied.Aims and methodsIndoor CO2, NO2, particulate matter (PM2.5), aldehydes, and airborne nicotine were measured in five vape-shops to assess secondhand exposures. Nicotine and tobacco-specific nitrosamines were measured on vape-shop surfaces and materials (glass, paper, clothing, rubber, and fur ball) placed in the vape-shops (14 days) to study thirdhand exposures.ResultsAirborne PM2.5, formaldehyde, acetaldehyde, and nicotine concentrations during shop opening hours were 21, 3.3, 4.0, and 3.8 times higher than the levels during shop closing hours, respectively. PM2.5 concentrations were correlated with the number of e-cigarette users present in vape-shops (ρ = 0.366-0.761, p < .001). Surface nicotine, 4-(N-methyl-N-nitrosamino)-4-(3-pyridyl)butanal (NNA), and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) were also detected at levels of 223.6 ± 313.2 µg/m2, 4.78 ± 11.8 ng/m2, and 44.8 ± 102.3 ng/m2, respectively. Substantial amounts of nicotine (up to 2073 µg/m2) deposited on the materials placed within the vape-shops, and NNA (up to 474.4 ng/m2) and NNK (up to 184.0 ng/m2) were also formed on these materials. The deposited nicotine concentrations were strongly correlated with the median number of active vapers present in a vape-shop per hour (ρ = 0.894-0.949, p = .04-.051). NNK levels on the material surfaces were significantly associated with surface nicotine levels (ρ=0.645, p = .037).ConclusionsIndoor vaping leads to secondhand and THA exposures. Thirdhand exposures induced by e-cigarette vaping are comparable or higher than that induced by cigarette smoking. Long-term studies in various microenvironments are needed to improve our understanding of secondhand and THA exposures.ImplicationsThis study adds new convincing evidence that e-cigarette vaping can cause secondhand and THA exposures. Our findings can inform Occupational Safety and Health Administration, state authorities, and other government agencies regarding indoor air policies related to e-cigarette use, particularly in vape-shops. There is an urgent need to ensure that vape-shops maintain suitable ventilation systems and cleaning practices to protect customers, employees, and bystanders. Our study also demonstrates that nicotine can deposit or be adsorbed on baby's clothes and toys, and that tobacco-specific nitrosamines can form and retain on baby's clothes, highlighting children's exposure to environmental e-cigarette aerosol and THA at home is of a particular concern.

Dataset Information

Passive remote sensing of aerosol layer height using near-UV multi-angle polarization measurements.

Publications

Passive remote sensing of aerosol layer height using near-UV multi-angle polarization measurements.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets