Dataset Information

Thermal effect on the compression coefficient of heavy oil reservoir rocks.

ABSTRACT: The ever-decreasing oil resources receive more and more attention for the exploration and development of heavy oil reservoirs. Owing to the high viscosity and poor fluidity of heavy oil, it is necessary to use the method of injecting high-temperature fluid in the development process. But, this will cause a significant increase in the temperature in oil reservoir, and thus the compression coefficient of reservoir rock has a greater impact. The compression coefficient of heavy oil reservoirs at different temperatures was tested. The results show that the compression coefficient of rock is closely related to the nature of rock itself and its stress and temperature environment: the compression coefficient increases with the increase in rock porosity; the compression coefficient decreases with the increase in the effective confining pressure and increases with the increase in temperature. When the temperature is low, the increase in the compression coefficient is larger. As the temperature increases, the increase in the compression coefficient tends to decrease gradually. Because the temperature of the reservoir is higher than that of the ground, the influence of the temperature on the reservoir compression coefficient should be taken into account when carrying out the production forecast.

SUBMITTER: Chao Z

PROVIDER: S-EPMC6083679 | biostudies-literature | 2018 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Thermal effect on the compression coefficient of heavy oil reservoir rocks.

Chao Zhang Z Chuanliang Yan Y Yuwen Liu L Yang Li L Yuanfang Cheng C Ji Tian T

Royal Society open science 20180718 7

The ever-decreasing oil resources receive more and more attention for the exploration and development of heavy oil reservoirs. Owing to the high viscosity and poor fluidity of heavy oil, it is necessary to use the method of injecting high-temperature fluid in the development process. But, this will cause a significant increase in the temperature in oil reservoir, and thus the compression coefficient of reservoir rock has a greater impact. The compression coefficient of heavy oil reservoirs at di ...[more]

PMID: 30109099

Similar Datasets

Project description:Smart waterflooding is one of the most practical emerging methods of enhanced oil recovery in carbonate reservoirs. In this study, the effect of salt type and its concentration in smart water on oil recovery from a carbonate reservoir rock is investigated. A series of experimental measurements, including zeta potential (ZP), interfacial tension (IFT), and contact angle (CA), were conducted to examine the effect of ions on the oil/brine/rock interaction. IFT, ZP, and CA were also used as screening methods to select effective solutions for flooding experiments. The results of the study show that synthesized brines containing sodium acetate and potassium acetate salts have a significant effect on the reduction of IFT; however, rock surface wettability due to such brines is insignificant. The presence of organic salts in the injected water can alter the properties of the fluid and rock surface, leading to improved oil recovery. The salts can reduce the interfacial tension between the oil and water phases, making it easier for the water to displace and mobilize trapped oil. This effect is particularly beneficial in reservoirs with high oil-water interfacial tension as it enhances the capillary forces and improves the sweep efficiency. Smart water with sodium acetate (MSW.NaOAc) caused a 7% increase in oil production in the tertiary injection process due to IFT and CA reduction. The secondary injection of MSW.NaOAc led to an oil production efficiency of 76%, which is 10% higher than that of the secondary injection of seawater (SW), confirming the effectiveness of acetate ions in enhancing oil recovery. Doubling the concentration of sulfate ions in modified SW (MSW.NaOAc.2S) caused a 19% increase in oil production in tertiary injections after SW flooding. The secondary injection of MSW.NaOAc.2S produced a 13% increase in the recovery factor compared to SW flooding in the secondary mode. The main driving mechanism for oil mobilization was found to be wettability alteration, which is supported by the analyses of CA and ZP. This study confirms that the salt type and concentration present in a brine solution play a vital role in the movement of trapped oil in carbonate reservoirs.

Project description:In this study, surfactants were used to enhance heavy oil-solid separation, and a detailed mechanism was explored by SARA (saturates, aromatics, resins, asphaltenes) analysis, element analysis, AFM measurement, and molecular dynamic simulation. Surfactants could effectively decrease oil/solid interaction force and then oil-solid separation would be enhanced. The oil-solid interactive force was in relation to surfactants concentration, pH value, asphaltene content, and salinity. The molecular dynamics simulation results show that the dissociation of saturated hydrocarbon, aromatic hydrocarbon, resin, and asphaltene (SARA) on carbonate minerals is gradually weakened for all surfactants. In the process of molecular dynamics simulation of surfactant stripping SARA, firstly, the surfactant molecules adsorb on the surface of SARA molecules. After that, the surfactant peels SARA molecules off the surface of calcite under the influence of molecular thermal motion. In this process, surfactant molecules will not be directly adsorbed on the surface of trace minerals. The results of energy/temperature balance indicated that saturates, aromatics and resins could remain stable when the molecular dynamics simulation time reached 2000 ps with the phenomenon that saturates, aromatics could liberate from minerals totally within 2000 ps. The molecular dynamics simulation of asphaltenes will not liberate from calcite surface within 6000 ps, meanwhile, they could not reach the energy balance/energy balance within 6000 ps. The functional groups of surfactant molecules would have interactions with the SARA functional group, resulting in different dissociation effects of SARA. The results of molecular dynamics simulation are consistent with the experiment results. The separation effect of saturated hydrocarbon, aromatic hydrocarbon, resin, and asphaltene in five kinds of surfactants were different. The molecular dynamic simulation results were in accordance with the SARA analysis.

Project description:The identification of potential hydrocarbon utilizing bacteria is an essential requirement in microbial enhanced oil recovery (MEOR). Molecular approaches like proteomic and genomic characterization of the isolates are replacing the traditional method of identification with systemic classification. Genotypic profiling of the isolates includes fingerprint or pattern-based technique and sequence-based technique. Understanding community structure and dynamics is essential for studying diversity profiles and is challenging in the case of microbial analysis. The present study aims to understand the bacterial community composition from different heavy oil contaminated soil samples collected from geographically related oil well areas in Oman and to identify spore-forming hydrocarbon utilizing cultivable bacteria. V4 region of 16S rDNA gene was the target for Ion PGM™. A total of 825081 raw sequences were obtained from Ion torrent from all the 10 soil samples. The species richness and evenness were found to be moderate in all the samples with four main phyla, Firmicutes, Bacteroidetes, Proteobacteria, and Actinobacteria, the most abundant being Firmicutes. Bacillus sp. ubiquitously dominated in all samples followed by Paenibacillus, which was followed by Brevibacillus, Planococcus, and Flavobacterium. Principal Coordinate Analysis (PCoA) and UPGMA dendrogram clustered the 10 soil samples into four main groups. Weighted UniFrac significance test determined that there was significant difference in the communities present in soil samples examined. It can be concluded that the microbial community was different in all the 10 soil samples with Bacillus and Paenibacillus sp. as predominating genus. The 16S rDNA sequencing of cultivable spore-forming bacteria identified the hydrocarbon utilizing bacteria as Bacillus and Paenibacillus sp. and the nucleotide sequences were submitted to NCBI GenBank under accession numbers KP119097-KP119115. Bacillus and Paenibacillus sp., which were relatively abundant in the oil fields, can be recommended to be chosen as candidates for hydrocarbon utilization study.

Dataset Information

Thermal effect on the compression coefficient of heavy oil reservoir rocks.

Publications

Thermal effect on the compression coefficient of heavy oil reservoir rocks.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets