Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Accelerated active phase transformation of NiO powered by Pt single atoms for enhanced oxygen evolution reaction.

ABSTRACT: Phase transformation of electrode materials widely occurs in electrocatalytic reactions. Metal oxides are promising electrocatalysts for the oxygen evolution reaction (OER); their phase transformation is a key step for the multi-electron OER, and requires extra overpotential. However, little attention has been paid to accelerating and enhancing the phase transformation. Here, we report for the first time that single-atom Pt incorporated into the bulk crystalline phase of porous NiO nanocubes (0.5 wt% Pt/NiO) can greatly promote the active phase (NiOOH) evolution. The Pt doping was achieved by a scalable nanocasting approach using SiO₂ as the hard template. In comparison with Pt/NiO samples with PtO₂ nanoparticles segregated at the NiO surface (1 wt% Pt), as well as atomistic Pt atoms solely bound at the surface by atomic layer deposition, the bulk Pt doping shows the strongest power in facilitating active phase transformation, which leads to improved OER activity with reduced overpotential and Tafel slope. Experiential data revealed that the charge-transfer from Pt to Ni through O leads to a local weaker Ni-O bond. First principles calculations confirmed that rather than acting as an active site for the OER, monatomic Pt effectively increases the phase transformation rate by reducing the migration barrier of nearby Ni atoms. Our discoveries reveal the relationships of the heteroatom doped structure and phase transformation behavior during the electrochemical process and offer a new route for designing high-performance electrocatalysts.

SUBMITTER: Lin C

PROVIDER: S-EPMC6114998 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Tailoring the active site for the oxygen evolution reaction on a Pt electrode

Project description:Highly active electrocatalysts for the oxygen evolution reaction (OER) are essential to improve the efficiency of water electrolysis. The properties of OER active sites on single-crystal Pt electrodes were examined herein. The OER is markedly enhanced by repeated oxidative and reductive potential cycles on the Pt(111) surface. The OER activity on Pt(111) is nine times higher in the third cycle than that before the potential cycles. OER activation by potential cycling depends on the (111) terrace width, with wider (111) terraces significantly enhancing the OER. The oxidation/reduction of the Pt(111) surface produces atomic-sized vacancies on the terraces that activate the OER. Structural analysis using X-ray diffraction reveals that the active sites formed by potential cycling are defects in the second subsurface Pt layer. Potential cycling induces the bowl-shaped roughening of the electrode surface, wherein high-coordination number Pt atoms at the bottom of the cavities activate the OER. Electrocatalytic oxygen evolution is a key reaction for water splitting, but the detailed atomic structures of single-crystal electrodes under cycling conditions are still not fully understood. Here, the authors study the oxygen evolution activity on Pt(111) during potential cycling and find that the current density reaches a maximum in the third cycle and is nine times higher than that in the initial cycle, owing to a roughened Pt(111) surface and formation of islands and atomic vacancies in the second subsurface Pt layer.

| S-EPMC9814662 | biostudies-literature

Solution-Grown Dendritic Pt-Based Ternary Nanostructures for Enhanced Oxygen Reduction Reaction Functionality.

Project description:Nanoalloys with anisotropic morphologies of branched and porous internal structures show great promise in many applications as high performance materials. Reported synthetic approaches for branched alloy nanostructures are, however, limited by the synthesis using a seed-growth process. Here, we demonstrate a conveniently fast and one-pot solution-phase thermal reduction strategy yielding nanoalloys of Pt with various solute feed ratios, exhibiting hyperbranched morphologies and good dispersity. When Pt was alloyed with transition metals (Ni, Co, Fe), we observed well-defined dendritic nanostructures in PtNi, PtCo and Pt(NiCo), but not in PtFe, Pt(FeNi) or Pt(FeCo) due to the steric hindrance of the trivalent Fe(acac)? precursor used during synthesis. In the case of Pt-based nanoalloys containing Ni and Co, the dendritic morphological evolution observed was insensitive to large variations in solute concentration. The functionality of these nanoalloys towards the oxygen reduction reaction (ORR); however, was observed to be dependent on the composition, increasing with increasing solute content. Pt?(NiCo)? exhibited superior catalytic activity, affording about a five- and 10-fold enhancement in area-specific and mass-specific catalytic activities, respectively, compared to the standard Pt/C nanocatalyst. This solution-based synthetic route offers a new approach for constructing dendritic Pt-based nanostructures with excellent product yield, monodispersity and high crystallinity.

| S-EPMC6070889 | biostudies-other

Modulating Pt-O-Pt atomic clusters with isolated cobalt atoms for enhanced hydrogen evolution catalysis.

Project description:Platinum is the most efficient catalyst for hydrogen evolution reaction in acidic conditions, but its widespread use has been impeded by scarcity and high cost. Herein, Pt atomic clusters (Pt ACs) containing Pt-O-Pt units were prepared using Co/N co-doped carbon (CoNC) as support. Pt ACs are anchored to single Co atoms on CoNC by forming strong interactions. Pt-ACs/CoNC exhibits only 24 mV overpotential at 10 mA cm-2 and a high mass activity of 28.6 A mg-1 at 50 mV, which is more than 6 times higher than commercial Pt/C with any Pt loadings. Spectroscopic measurements and computational modeling reveal the enhanced hydrogen generation activity attributes to the charge redistribution between Pt and O atoms in Pt-O-Pt units, making Pt atoms the main active sites and O linkers the assistants, thus optimizing the proton adsorption and hydrogen desorption. This work opens an avenue to fabricate noble-metal-based ACs stabilized by single-atom catalysts with desired properties for electrocatalysis.

| S-EPMC9068789 | biostudies-literature

Enhanced oxygen reduction reaction activity and durability of Pt nanoparticles deposited on graphene-coated alumina nanofibres.

Project description:The oxygen reduction reaction (ORR) activity and stability of Pt catalysts deposited on graphene-coated alumina nanofibres (GCNFs) were investigated. The GCNFs were fabricated by catalyst-free chemical vapour deposition. Pt nanoparticles (NPs) were deposited on the nanofibres by sonoelectrochemical and plasma-assisted synthesis methods. Scanning and transmission electron microscopy analyses revealed different surface morphologies of the prepared Pt catalysts, depending on the synthesis procedure. Sonoelectrochemical deposition resulted in a uniform distribution of smaller Pt NPs on the support surface, while plasma-assisted synthesis, along with well-dispersed smaller Pt NPs, led to particle agglomeration at certain nucleation sites. Further details about the surface features were obtained from cyclic voltammetry and CO stripping experiments in 0.1 M HClO4 solution. Rotating disk electrode investigations revealed that the Pt/GCNF catalyst is more active towards the ORR in acid media than the commercial Pt/C (20 wt%). The prepared catalyst also showed significantly higher durability than commercial Pt/C, with no change in the half-wave potential after 10 000 potential cycles.

| S-EPMC9417899 | biostudies-literature

Porous Pt-NiO x nanostructures with ultrasmall building blocks and enhanced electrocatalytic activity for the ethanol oxidation reaction.

Project description:Oxidized species on surfaces would significantly improve the electrocatalytic activity of Pt-based materials. Constructing three-dimensional porous structures would endow the catalysts with good stability. Here, we report a simple strategy to synthesize porous Pt-NiO x nanostructures composed of ultrasmall (about 3.0 nm) building blocks in an ethanol-water solvent. Structure and component analysis revealed that the as-prepared material consisted of interconnected Pt nanocrystals and amorphous NiO x species. The formation mechanism investigation revealed that the preformed amorphous compounds were vital for the construction of porous structure. In the ethanol oxidation reaction, Pt-NiO x /C exhibited current densities of 0.50 mA cmPt -2 at 0.45 V (vs. SCE), which were 16.7 times higher than that of a commercial Pt/C catalyst. Potentiostatic tests showed that Pt-NiO x /C had much higher current and better tolerance towards CO poisoning than the Pt/C catalyst under 0.45 V (vs. SCE). In addition, the NiO x species on the surface also outperformed an alloyed Ni component in the test. These results indicate that the Pt-NiO x porous nanomaterial is promising for use in direct ethanol fuel cells.

| S-EPMC9076817 | biostudies-literature

Mesoporous WCx Films with NiO-Protected Surface: Highly Active Electrocatalysts for the Alkaline Oxygen Evolution Reaction.

Project description:Metal carbides are promising materials for electrocatalytic reactions such as water electrolysis. However, for application in catalysis for the oxygen evolution reaction (OER), protection against oxidative corrosion, a high surface area with facile electrolyte access, and control over the exposed active surface sites are highly desirable. This study concerns a new method for the synthesis of porous tungsten carbide films with template-controlled porosity that are surface-modified with thin layers of nickel oxide (NiO) to obtain active and stable OER catalysts. The method relies on the synthesis of soft-templated mesoporous tungsten oxide (mp. WOx ) films, a pseudomorphic transformation into mesoporous tungsten carbide (mp. WCx ), and a subsequent shape-conformal deposition of finely dispersed NiO species by atomic layer deposition (ALD). As theoretically predicted by density functional theory (DFT) calculations, the highly conductive carbide support promotes the conversion of Ni2+ into Ni3+ , leading to remarkably improved utilization of OER-active sites in alkaline medium. The obtained Ni mass-specific activity is about 280 times that of mesoporous NiOx (mp. NiOx ) films. The NiO-coated WCx catalyst achieves an outstanding mass-specific activity of 1989 A gNi -1 in a rotating-disc electrode (RDE) setup at 25 °C using 0.1 m KOH as the electrolyte.

| S-EPMC8596595 | biostudies-literature

Cage-bell Pt-Pd nanostructures with enhanced catalytic properties and superior methanol tolerance for oxygen reduction reaction.

Project description:Precisely tailoring the structure and fully making use of the components of nanoparticles are effective to enhance their catalytic performance for a given reaction. We herein demonstrate the design of cage-bell structured Pt-Pd nanoparticles, where a Pd shell is deliberately selected to enhance the catalytic property and methanol tolerance of Pt for oxygen reduction reaction. This strategy starts with the synthesis of core-shell Pt@Ag nanoparticles, followed by galvanic replacement reaction between the Ag shell and Pd(2+) ions to form core-shell-shell Pt@Ag@Ag-Pd nanoparticles with a Pt core and double shells composed of Ag at inner and alloy Ag-Pd at outer, respectively. Then, the core-shell-shell templates are agitated with saturated NaCl solution to eliminate the Ag component from the double shells, leading to the formation of bimetallic Pt-Pd nanoparticles with a cage-bell structure, defined as a movable Pt core enclosed by a porous Pd shell, which show enhanced catalytic activity for oxygen reduction compared with that of the Pt seeds due to the additional catalysis from Pd shell. In addition, owing to the different diffusion behavior of methanol and oxygen molecules in the porous Pd shell, the Pt-Pd cage-bell nanostructures also exhibit superior methanol tolerant property in catalyzing the oxygen reduction.

| S-EPMC4832323 | biostudies-literature

Active auroral arc powered by accelerated electrons from very high altitudes.

Project description:Bright, discrete, thin auroral arcs are a typical form of auroras in nightside polar regions. Their light is produced by magnetospheric electrons, accelerated downward to obtain energies of several kilo electron volts by a quasi-static electric field. These electrons collide with and excite thermosphere atoms to higher energy states at altitude of ~ 100 km; relaxation from these states produces the auroral light. The electric potential accelerating the aurora-producing electrons has been reported to lie immediately above the ionosphere, at a few altitudes of thousand kilometres1. However, the highest altitude at which the precipitating electron is accelerated by the parallel potential drop is still unclear. Here, we show that active auroral arcs are powered by electrons accelerated at altitudes reaching greater than 30,000 km. We employ high-angular resolution electron observations achieved by the Arase satellite in the magnetosphere and optical observations of the aurora from a ground-based all-sky imager. Our observations of electron properties and dynamics resemble those of electron potential acceleration reported from low-altitude satellites except that the acceleration region is much higher than previously assumed. This shows that the dominant auroral acceleration region can extend far above a few thousand kilometres, well within the magnetospheric plasma proper, suggesting formation of the acceleration region by some unknown magnetospheric mechanisms.

| S-EPMC7814012 | biostudies-literature

Synergistic Effects of Active Sites' Nature and Hydrophilicity on the Oxygen Reduction Reaction Activity of Pt-Free Catalysts.

Project description:This work highlights the importance of the hydrophilicity of a catalyst's active sites on an oxygen reduction reaction (ORR) through an electrochemical and physico-chemical study on catalysts based on nitrogen-modified carbon doped with different metals (Fe, Cu, and a mixture of them). BET, X-ray Powder Diffraction (XRPD), micro-Raman, X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Scanning Transmission Electron Microscopy (STEM), and hydrophilicity measurements were performed. All synthesized catalysts are characterized not only by a porous structure, with the porosity distribution centered in the mesoporosity range, but also by the presence of carbon nanostructures. In iron-doped materials, these nanostructures are bamboo-like structures typical of nitrogen carbon nanotubes, which are better organized, in a larger amount, and longer than those in the copper-doped material. Electrochemical ORR results highlight that the presence of iron and nitrogen carbon nanotubes is beneficial to the electroactivity of these materials, but also that the hydrophilicity of the active site is an important parameter affecting electrocatalytic properties. The most active material contains a mixture of Fe and Cu.

| S-EPMC6163935 | biostudies-literature

Dealloying of Nitrogen-Introduced Pt-Co Alloy Nanoparticles: Preferential Core-Shell Formation with Enhanced Activity for Oxygen Reduction Reaction.

Project description:Voltammetric dealloying is a typical method to synthesize Pt-shell/less-noble metal (M) alloy core nanoparticles (NPs) toward the oxygen reduction reaction (ORR). The pristine nanostructures of the Pt-M alloy NPs should determine the ORR activity of the dealloyed NPs. In this study, we investigated the voltammetric dealloying behavior of the Pt-Co and nitrogen-introduced Pt-Co alloy NPs generated by synchronous arc-plasma deposition of Pt and Co. The results showed that the dealloying behavior is sensitive to cobalt nitride in the pristine NPs, leading to the preferential generation of a Pt-rich shell/Pt-Co alloy core architecture having enhanced ORR activity.

| S-EPMC6640784 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data