Browse
Submit Data
Databases
API
Help

Dataset Information

6 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Green method for efficient PdNPs deposition on carbon carrier in the microreactor system.

ABSTRACT: The synthesis of palladium nanoparticles and conditions of their deposition on active carbon fibers in the microreactor was described. All processes related with metal ion reduction, nucleation, and autocatalytic growth of particles as well as their deposition were carried out in the microreactor in only one cycle. Synthesis of palladium nanoparticles was carried out under different conditions, i.e., changing the initial concentration of metal ions and the reductant, at 40 °C. Depending on the conditions imposed, the nanoparticles of different size (hydrodynamic radius change from 12 to 37 nm) and shape (spherical, cube, pyramid) were obtained. It was also shown that flow conditions allow for much more efficient Pd deposition on active carbon fibers than the process carried out in the batch. It was observed that for concentrations of Pd(II) ions higher than 0.2 mM, the degree of fiber surface coverage increased significantly in comparison with the batch process.

SUBMITTER: Luty-Blocho M

PROVIDER: S-EPMC6132981 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Batch Reactor vs. Microreactor System for Efficient AuNP Deposition on Activated Carbon Fibers.

Project description:The process of noble metals ions recovery and the removal small fraction of nanoparticles from waste solution is an urgent topic not only from the economic but also ecology point of view. In this paper, the use of activated carbon fibers (ACF) as a "trap" for gold nanoparticles obtained by a chemical reduction method is described. The synthesized nanoparticles were stabilized either electrostatically or electrosterically and then deposited on carbon fibers or activated carbon fibers. Moreover, the deposition of metal on fibers was carried out in a batch reactor and a microreactor system. It is shown, that process carried out in the microreactor system is more efficient (95%) as compared to the batch reactor and allows for effective gold nanoparticles removal from the solution. Moreover, for similar conditions, the adsorption time of the AuNPs on ACF is shortened from 11 days for the process carried out in the batch reactor to 2.5 min in the microreactor system.

| S-EPMC8585125 | biostudies-literature

An efficient method for measuring plasma volume using indocyanine green dye.

Project description:Plasma volume (PV) can be an important marker of health status and may affect the interpretation of plasma biomarkers, but is rarely measured due to the complexity and time required. Indocyanine green (ICG) is a water-soluble tricarbocyanine dye with a circulatory half-life of 2-3 min, allowing for quick clearance and repeated use. It is used extensively in medical diagnostic tests including ophthalmologic imaging, liver function, and cardiac output, particularly in critical care. ICG has been validated for measuring PV in humans, however previous work has provided minimal published details or has focused on a single aspect of the method. We aimed to develop a detailed, optimal protocol for the use of ICG to measure PV in women of reproductive age. We combined best practices from other studies and optimized the protocol for efficiency. •This method reduces the time from blood collection to PV determination to ˜2 h and the amount of plasma required to estimate PV to 2.5 mL (1.5 mL before ICG injection and 1.0 mL post-injection).•Participant inconvenience is reduced by inserting an intravenous (IV) catheter in only one arm, not both arms.•Five post-injection plasma samples (2-5 min after ICG bolus) are enough to accurately develop the decay curve for plasma ICG concentration and estimate PV by extrapolation.

| S-EPMC6526294 | biostudies-literature

Green synthesis of carbon-supported nanoparticle catalysts by physical vapor deposition on soluble powder substrates.

Project description:Metal and metal oxide nanoparticles (NPs) supported on high surface area carbon (NP/Cs) were prepared by the physical vapor deposition of bulk materials on an ?-D-glucose (Glu) substrate, followed by the deposition of the NPs on carbon supports. Using Glu as a carrier for the transport of NPs from the bulk materials to the carbon support surfaces, ultrafine NPs were obtained, exhibiting a stabilizing effect through OH moieties on the Glu surfaces. This stabilizing effect was strong enough to stabilize the NPs, but weak enough to not significantly block the metal surfaces. As only the target materials and Glu are required in our procedure, it can be considered environmentally friendly, with the NPs being devoid of hazardous chemicals. Furthermore, the resulting NP/Cs exhibited an improvement in activity for various electrochemical reactions, mainly attributed to their high surface area.

| S-EPMC4585564 | biostudies-literature

Atomic Layer Deposition of Cobalt Catalyst for Fischer-Tropsch Synthesis in Silicon Microchannel Microreactor.

Project description:In recent years, rising environmental concerns have led to the focus on some of the innovative alternative technologies to produce clean burning fuels. Fischer-Tropsch (FT) synthesis is one of the alternative chemical processes to produce synthetic fuels, which has a current research focus on reactor and catalyst improvements. In this work, a cobalt nanofilm (~4.5 nm), deposited by the atomic layer deposition (ALD) technique in a silicon microchannel microreactor (2.4 cm long × 50 µm wide × 100 µm deep), was used as a catalyst for atmospheric Fischer-Tropsch (FT) synthesis. The catalyst film was characterized by XPS, TEM-EDX, and AFM studies. The data from AFM and TEM clearly showed the presence of polygranular cobalt species on the silicon wafer. The XPS studies of as-deposited and reduced cobalt nanofilm in silicon microchannels showed a shift on the binding energies of Co 2p spin splits and confirmed the presence of cobalt in the Co0 chemical state for FT synthesis. The FT studies using the microchannel microreactor were carried out at two different temperatures, 240 °C and 220 °C, with a syngas (H2:CO) molar ratio of 2:1. The highest CO conversion of 74% was observed at 220 °C with the distribution of C1-C4 hydrocarbons. The results showed no significant selectivity towards butane at the higher temperature, 240 °C. The deactivation studies were performed at 220 °C for 60 h. The catalyst exhibited long-term stability, with only ~13% drop in the CO conversion at the end of 60 h. The deactivated cobalt film in the microchannels was investigated by XPS, showing a weak carbon peak in the XPS spectra.

| S-EPMC9320865 | biostudies-literature

Nanostructured ZnO as Multifunctional Carrier for a Green Antibacterial Drug Delivery System-A Feasibility Study.

Project description:The physico⁻chemical and biological properties of nanostructured ZnO are combined with the non-toxic and eco-friendly features of the scCO₂-mediated drug loading technique to develop a multifunctional antimicrobial drug delivery system for potential applications in wound healing. Two nanostructured ZnO (NsZnO) with different morphologies were prepared through wet organic-solvent-free processes and characterized by means of powder X-ray diffraction, field emission scanning electron microscopy (FESEM), and nitrogen adsorption analysis. The antimicrobial activity of the two samples against different microbial strains was investigated together with the in vitro Zn2+ release. The results indicated that the two ZnO nanostructures exhibited the following activity: S. aureus > C. albicans > K. pneumoniae. A correlation between the antimicrobial activity, the physico⁻chemical properties (specific surface area and crystal size) and the Zn2+ ion release was found. Ibuprofen was, for the first time, loaded on the NsZnO carriers with a supercritical CO₂-mediated drug impregnation process and in vitro dissolution studies of the loaded drug were performed. A successful loading up to 14% w/w of ibuprofen in its amorphous form was obtained. A preliminary drug release test showed that up to 68% of the loaded ibuprofen could be delivered to a biological medium, confirming the feasibility of using NsZnO as a multifunctional antimicrobial drug carrier.

| S-EPMC6473990 | biostudies-literature

Green and Efficient Esterification Method Using Dried Dowex H<sup>+</sup>/NaI Approach.

Project description:The usefulness of dried Dowex H+ cation-exchange resin with or without sodium iodide (NaI) as a catalyst system for different kinds of esterifications using carboxylic acids and alcohols as starting materials has been systematically investigated. The Dowex H+/NaI approach is very effective, generally high yielding, energy-efficient, and nontoxic, and the Dowex H+ resin is reusable. Since the whole procedure from start to product isolation is also very simple, these features make the method environmentally friendly. The method is regioselective, and its potential for separation of valuable carboxylic acids like resin acids from mixtures containing other kinds of carboxylic acids has been demonstrated. Examples for green and straightforward esterification of highly important natural amino acids are also presented.

| S-EPMC6648282 | biostudies-literature

Biocatalytic synthesis of the Green Note trans-2-hexenal in a continuous-flow microreactor.

Project description:The biocatalytic preparation of trans-hex-2-enal from trans-hex-2-enol using a novel aryl alcohol oxidase from Pleurotus eryngii (PeAAOx) is reported. As O2-dependent enzyme PeAAOx-dependent reactions are generally plagued by the poor solubility of O2 in aqueous media and mass transfer limitations resulting in poor reaction rates. These limitations were efficiently overcome by conducting the reaction in a flow-reactor setup reaching unpreceded catalytic activities for the enzyme in terms of turnover frequency (up to 38 s-1) and turnover numbers (more than 300000) pointing towards preparative usefulness of the proposed reaction scheme.

| S-EPMC5905246 | biostudies-literature

Oil-Dispersible Green-Emitting Carbon Dots: New Insights on a Facile and Efficient Synthesis.

Project description:Carbon dots (CDs) have been progressively attracting interest as novel environmentally friendly and cost-effective luminescent nanoparticles, for implementation in light-emitting devices, solar cells, photocatalytic devices and biosensors. Here, starting from a cost-effective bottom-up synthetic approach, based on a suitable amphiphilic molecule as carbon precursor, namely cetylpyridinium chloride (CPC), green-emitting CDs have been prepared at room temperature, upon treatment of CPC with concentrated NaOH solutions. The investigated method allows the obtaining, in one-pot, of both water-dispersible (W-CDs) and oil-dispersible green-emitting CDs (O-CDs). The study provides original insights into the chemical reactions involved in the process of the carbonization of CPC, proposing a reliable mechanism for the formation of the O-CDs in an aqueous system. The ability to discriminate the contribution of different species, including molecular fluorophores, allows one to properly single out the O-CDs emission. In addition, a mild heating of the reaction mixture, at 70 °C, has demonstrated the ability to dramatically decrease the very long reaction time (i.e. from tens of hours to days) at room temperature, allowing us to synthesize O-CDs in a few tens of minutes while preserving their morphological and optical properties.

| S-EPMC7503313 | biostudies-literature

Fabrication of efficient planar perovskite solar cells using a one-step chemical vapor deposition method.

Project description:Organometallic trihalide perovskites are promising materials for photovoltaic applications, which have demonstrated a rapid rise in photovoltaic performance in a short period of time. We report a facile one-step method to fabricate planar heterojunction perovskite solar cells by chemical vapor deposition (CVD), with a solar power conversion efficiency of up to 11.1%. We performed a systematic optimization of CVD parameters such as temperature and growth time to obtain high quality films of CH3NH3PbI3 and CH3NH3PbI(3-x)Clx perovskite. Scanning electron microscopy and time resolved photoluminescence data showed that the perovskite films have a large grain size of more than 1 micrometer, and carrier life-times of 10 ns and 120 ns for CH3NH3PbI3 and CH3NH3PbI(3-x)Clx, respectively. This is the first demonstration of a highly efficient perovskite solar cell using one step CVD and there is likely room for significant improvement of device efficiency.

| S-EPMC4585726 | biostudies-literature

Green and Highly-Efficient Microwave Synthesis Route for Sulfur/Carbon Composite for Li-S Battery.

Project description:Multiporous carbons (MPCs) are prepared using ZnO as a hard template and biomass pyrolysis oil as the carbon source. It is shown that the surface area, pore volume, and mesopore/micropore ratio of the as-prepared MPCs can be easily controlled by adjusting the ZnO/oil ratio. Sulfur/MPC (S/MPC) composite is prepared by blending sulfur powder with the as-prepared MPCs followed by microwave heating at three different powers (100 W/200 W/300 W) for 60 s. The unique micro/mesostructure characteristics of the resulting porous carbons not only endow the S/MPC composite with sufficient available space for sulfur storage, but also provide favorable and efficient channels for Li-ions/electrons transportation. When applied as the electrode material in a lithium-ion battery (LIB), the S/MPC composite shows a reversible capacity (about 500 mAh g-1) and a high columbic efficiency (>95%) after 70 cycles. Overall, the method proposed in this study provides a simple and green approach for the rapid production of MPCs and S/MPC composite for high-performance LIBs.

| S-EPMC8744887 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data