Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effective Removal of Sulfanilic Acid From Water Using a Low-Pressure Electrochemical RuO₂-TiO₂@Ti/PVDF Composite Membrane.

ABSTRACT: Removal of sulfanilic acid (SA) from water is an urgent but still challenging task. Herein, we developed a low pressure electrochemical membrane filtration (EMF) system for SA decontamination using RuO₂-TiO₂@Ti/PVDF composite membrane to serve as not only a filter but also an anode. Results showed that efficient removal of SA was achieved in this EMF system. At a charging voltage of 1.5 V and a electrolyte concentration of 15 mM, flow-through operation with a hydraulic retention time (HRT) of 2 h led to a high SA removal efficiency (80.4%), as expected from the improved contact reaction of this compound with ROS present at the anode surface. Cyclic voltammetry (CV) analysis indicated that the direct anodic oxidation played a minor role in SA degradation. Electron spin resonance (ESR) spectra demonstrated the production of ^•OH in the EMF system. Compared to the cathodic polarization, anodic generated ROS was more likely responsible for SA removal. Scavenging tests suggested that adsorbed ^•OH on the anode (>^•OH) played a dominant role in SA degradation, while O2•- was an important intermediate oxidant which mediated the production of ^•OH. The calculated mineralization current efficiency (MCE) of the flow-through operated system 29.3% with this value much higher than that of the flow-by mode (5.1%). As a consequence, flow-through operation contributed to efficient oxidation of SA toward CO₂ and nontoxic carboxylic acids accounting for 71.2% of initial C. These results demonstrate the potential of the EMF system to be used as an effective technology for water decontamination.

SUBMITTER: Zheng J

PROVIDER: S-EPMC6135927 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Preparation of Porous Ti/RuO2-IrO2@Pt, Ti/RuO2-TiO2@Pt and Ti/Y2O3-RuO2-TiO2@Pt Anodes for Efficient Electrocatalytic Decomposition of Tetracycline.

Project description:Electrocatalytic oxidation (ECO) has attracted attention because of its high efficiency and environmental friendliness in water treatment. The preparation of anodes with high catalytic activity and long service lifetimes is a core part of electrocatalytic oxidation technology. Here, porous Ti/RuO2-IrO2@Pt, Ti/RuO2-TiO2@Pt, and Ti/Y2O3-RuO2-TiO2@Pt anodes were fabricated by means of modified micro-emulsion and vacuum impregnation methods with high porosity titanium plates as substrates. The scanning electron microscopy (SEM) images showed that RuO2-IrO2@Pt, RuO2-TiO2@Pt, and Y2O3-RuO2-TiO2@Pt nanoparticles were coated on the inner surface of the as-prepared anodes to form the active layer. Electrochemical analysis revealed that the high porosity substrate could result in a large electrochemically active area, and a long service life (60 h at 2 A cm-2 current density, 1 mol L-1 H2SO4 as the electrolyte, and 40 °C). The degradation experiments conducted on tetracycline hydrochloride (TC) showed that the porous Ti/Y2O3-RuO2-TiO2@Pt had the highest degradation efficiency for tetracycline, reaching 100% removal in 10 min with the lowest energy consumption of 167 kWh kg-1 TOC. The reaction was consistent with the pseudo-primary kinetics results with a k value of 0.5480 mol L-1 s-1, which was 16 times higher than that of the commercial Ti/RuO2-IrO2 electrode. The fluorospectrophotometry studies verified that the degradation and mineralization of tetracycline were mainly ascribed to the •OH generated in the electrocatalytic oxidation process. This study thus presents a series of alternative anodes for future industrial wastewater treatment.

| S-EPMC10004508 | biostudies-literature

Advanced Removal of Dyes with Tuning Carbon/TiO2 Composite Properties.

Project description:This study evaluates the removal of several dyes with different charge properties, i.e., anionic (Acid Red 88), cationic (Basic Red 13), and neutral (Basic Red 5) using transition metal-doped TiO2 supported on a high-surface-area activated carbon. Experimental results confirm the successful deposition of TiO2 and the derivatives (Zr-, Cu-, and Ce-doped samples) on the surface of the activated carbon material and the development of extended heterojunctions with improved electronic properties. Incorporating a small percentage of dopants significantly improves the adsorption properties of the composites towards the three dyes evaluated, preferentially for sample AC/TiO2_Zr. Similarly, the photodegradation efficiency highly depends on the nature of the composite evaluated and the characteristics of the dye. Sample AC/TiO2_Zr demonstrates the best overall removal efficiency for Acid Red 88 and Basic Red 5-83% and 63%, respectively. This promising performance must simultaneously be attributed to a dual mechanism, i.e., adsorption and photodegradation. Notably, the AC/TiO2_Ce outperformed the other catalysts in eliminating Basic Red 13 (74%/6 h). A possible Acid Red 88 degradation mechanism using AC/TiO2_Zr was proposed. This study shows that the removal efficiency of AC/TiO2 composites strongly depends on both the material and pollutant.

| S-EPMC10856939 | biostudies-literature

Mechanism of N,N-dimethylformamide electrochemical oxidation using a Ti/RuO2-IrO2 electrode.

Project description:The compound N,N-dimethylformamide (DMF) is a widely used industrial chemical and a common environmental contaminant that has been found to be harmful to human health. In this study, electrochemical oxidation was adopted for the degradation of DMF. The effects of four kinds of electrodes on the removal rates of DMF and total organic carbon were compared, and based on the result, the Ti/RuO2-IrO2 electrode was selected as the operating electrode. The effects of three independent factors (current density, pH, and NaCl proportion) on the DMF degradation were investigated through single-factor experiments, and the experimental results were optimized by response surface methodology. The optimal experimental conditions were obtained as follows: current density = 47 mA cm-2, pH = 5.5, and NaCl proportion = 15%. The electrochemical oxidation of 50 mg L-1 DMF was performed under the optimal conditions; the degradation rate was 97.2% after 7 h, and the reaction followed the pseudo-first-order kinetic model. The degradation products under optimal conditions and chlorine-free conditions were analyzed, and four degradation pathways were proposed. The DMF degradation was more thorough under optimal conditions.

| S-EPMC8694957 | biostudies-literature

Fabrication of PbO2/PVDF/CC Composite and Employment for the Removal of Methyl Orange.

Project description:The in situ electrochemical oxidation process has received considerable attention for the removal of dye molecules and ammonium from textile dyeing and finishing wastewater. Nevertheless, the cost and durability of the catalytic anode have seriously limited industrial applications of this technique. In this work, the lab-based waste polyvinylidene fluoride membrane was employed to fabricate a novel lead dioxide/polyvinylidene fluoride/carbon cloth composite (PbO2/PVDF/CC) via integrated surface coating and electrodeposition processes. The influences of operating parameters (pH, Cl- concentration, current density, and initial concentration of pollutant) on the oxidation efficiency of PbO2/PVDF/CC were evaluated. Under optimal conditions, this composite achieves a 100% decolorization of methyl orange (MO), 99.48% removal of ammonium, and 94.46% conversion for ammonium-based nitrogen to N2, as well as an 82.55% removal of chemical oxygen demand (COD). At the coexistent condition of ammonium and MO, MO decolorization, ammonium, and COD removals still remain around 100%, 99.43%, and 77.33%, respectively. It can be assigned to the synergistic oxidation effect of hydroxyl radical and chloride species for MO and the chlorine oxidation action for ammonium. Based on the determination of various intermediates, MO is finally mineralized to CO2 and H2O, and ammonium is mainly converted to N2. The PbO2/PVDF/CC composite exhibits excellent stability and safety.

| S-EPMC10053905 | biostudies-literature

Fabrication of Anatase TiO2/PVDF Composite Membrane for Oil-in-Water Emulsion Separation and Dye Photocatalytic Degradation.

Project description:At present, the types of pollutants in wastewater are more and more complicated, however, the multifunctional membrane materials are in short supply. To prepare a membrane with both high efficient oil-in-water emulsion separation performance and photocatalytic degradation performance of organic dyes, the bifunctional separation membrane was successfully prepared by electrostatic spinning technology of PVDF/PEMA and in situ deposition of anatase TiO2 nanoparticles containing Ti3+ and oxygen vacancies (Ov). The prepared composite membrane has excellent hydrophilic properties (WCA = 15.65), underwater oleophobic properties (UOCA = 156.69), and photocatalytic performance. These composite membranes have high separation efficiency and outstanding anti-fouling performance, the oil removal efficiency reaches 98.95%, and the flux recovery rate (FRR) reaches 99.19% for soybean oil-in-water emulsion. In addition, the composite membrane has outstanding photocatalytic degradation performance, with 97% and 90.2% degradation of RhB and AG-25 under UV conditions, respectively. Several oil-in-water separation and dye degradation experiments show that the PVDF composite membrane has excellent reuse performance. Based on these results, this study opens new avenues for the preparation of multifunctional reusable membranes for the water treatment field.

| S-EPMC10055995 | biostudies-literature

Supercapacitive performance of TiO2 boosted by a unique porous TiO2/Ti network and activated Ti3.

Project description:TiO2 has been reported to have considerable capacity through appropriate surface modification. Previous studies of TiO2-based supercapacitors mainly focused on anodized TiO2 nanotubes and TiO2 powder, even though the capacitance still lags behind that of carbon-base materials. In this work, a three-dimensional porous TiO2/Ti (PTT) network was constructed by anodic oxidation and its capacitance was boosted by subsequent aluminum-reduction process. Activated Ti3+ was proved to be being successfully introduced into the surface of pristine PTT, resulting in the prominent enhancement of supercapacitive performance. An areal capacitance of 81.75 mF cm-2 was achieved from Al-reduced PTT (Al-PTT) at 500 °C in 1 M H2SO4 electrolyte, which was among the highest value of pure TiO2-based electrodes. Good electrochemical stability was also confirmed by the 3.12% loss of the highest capacity after 5000 CV cycles. More importantly, the activated Ti3+/Ti4+ redox couple in modified TiO2 is solidly confirmed by being directly observed in CV curves. The capacitive mechanism of the redox reaction is also studied by electrochemical tests. The construction of a 3D porous network structure and efficient Ti3+ introduction provide an effective method to boost the supercapacitive performance of TiO2-based materials for energy storage applications.

| S-EPMC9061586 | biostudies-literature

Inversely polarized thermo-electrochemical power generation via the reaction of an organic redox couple on a TiO2/Ti mesh electrode.

Project description:We demonstrate thermo-electrochemical (TEC) conversion using a biocompatible redox couple of lactic acid and pyruvic acid on earth-abundant TiO2. The TEC cell exhibited a positive Seebeck coefficient of 1.40 mV K-1. DFT calculations figured out that the adsorption of intermediate species and protons on TiO2 controls both the redox reaction and current polarity.

| S-EPMC8260709 | biostudies-literature

Selective growth of Ti3+/TiO2/CNT and Ti3+/TiO2/C nanocomposite for enhanced visible-light utilization to degrade organic pollutants by lowering TiO2-bandgap.

Project description:A convenient route was developed for the selective preparation of two stable nanocomposites, Ti3+/TiO2/CNT (labeled as TTOC-1 and TTOC-3) and Ti3+/TiO2/carbon layer (labeled as TTOC-2), from the same precursor by varying the amount of single-walled carbon nanotubes used in the synthesis. TiO2 is an effective photocatalyst; however, its wide bandgap limits its usefulness to the UV region. As a solution to this problem, our prepared nanocomposites exhibit a small bandgap and wide visible-light (VL) absorption because of the introduction of carbonaceous species and Ti3+ vacancies. The photocatalytic efficiency of the nanocomposites was examined via the degradation of methylene blue dye under VL. Excellent photocatalytic activity of 83%, 98%, and 93% was observed for TTOC-1, TTOC-2, and TTOC-3 nanocomposites within 25 min. In addition, the photocatalytic degradation efficiency of TTOC-2 toward methyl orange, phenol, rhodamine B, and congo red was 28%, 69%, 71%, and 91%, respectively, under similar experimental conditions after 25 min. Higher reusability and structural integrity of the as-synthesized photocatalyst were confirmed within five consecutive runs by photocatalytic test and X-ray diffraction analysis, respectively. The resulting nanocomposites provide new insights into the development of VL-active and stable photocatalysts with high efficiencies.

| S-EPMC8096813 | biostudies-literature

The simultaneous removal of heavy metals and organic contaminants over a Bi2WO6/mesoporous TiO2 nanotube composite photocatalyst.

Project description:In this study, Bi2WO6/mesoporous TiO2 nanotube composites (BWO/TNTs) were successfully synthesized to remove the heavy metal Cr(vi) and refractory organic compound dibutyl phthalate (DBP) from contaminated water under visible light. Coupling TNTs with BWO can greatly improve the photocatalytic activity of the catalyst for treating Cr(vi)-DBP mixed pollutants because of synergetic effects from Cr(vi) and DBP. Specifically, the visible-light photocatalytic activities of 3% BWO/TNTs for removing DBP and Cr(vi) from mixed pollutant solutions were 10.8 and 3.8 times higher than those of BWO. Firstly, this system can take full advantage of charge carriers and can spatially separate reduction sites and oxidation sites in the photocatalyst. Secondly, TNTs has a unique multiscale channel structure that can enhance mass transfer and light utilization. These characteristics lead to very obvious photocatalytic activity improvements. In addition, the BWO/TNTs composite photocatalysts exhibited excellent stability and durability under visible and UV light irradiation. This work demonstrated a feasible method for fabricating composite photocatalysts and applied them to the simultaneous removal of heavy metal and refractory organic pollutants from contaminated water.

| S-EPMC9054361 | biostudies-literature

TiO2/Karaya Composite for Photoinactivation of Bacteria.

Project description:TiO2/Karaya composite was synthesized by the sol-gel method for the photoinactivation of pathogens. This is the first time that we have reported this composite for an antimicrobial approach. The structure, morphology, and optical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-rays (EDS), Fourier transform infrared spectroscopy (FTIR), and diffuse reflectance, and the surface area was characterized by the BET method. The XRD and EDS results showed that the TiO2/Karaya composite was successfully stabilized by the crystal structure and pore diameter distribution, indicating a composite of mesoporous nature. Furthermore, antibacterial experiments showed that the TiO2/Karaya composite under light was able to photoinactivate bacteria. Therefore, the composite is a promising candidate for inhibiting the growth of bacteria.

| S-EPMC9267801 | biostudies-literature