Dataset Information

Polycyclic Aromatic Hydrocarbons in Fine Particulate Matter Emitted from Burning Kerosene, Liquid Petroleum Gas, and Wood Fuels in Household Cookstoves.

ABSTRACT: This study measures polycyclic aromatic hydrocarbon (PAH) compositions in particulate matter emissions from residential cookstoves. A variety of fuel and cookstove combinations are investigated, including: (i) liquid petroleum gas (LPG), (ii) kerosene in a wick stove, (iii) wood (10 and 30% moisture content on a wet basis) in a forced-draft fan stove, and (iv) wood in a natural-draft rocket cookstove. The wood burning in the natural-draft stove had the highest PAH emissions followed by the wood combustion in the forced-draft stove and kerosene burning. LPG combustion has the highest thermal efficiency (?57%) and the lowest PAH emissions per unit fuel energy, resulting in the lowest PAH emissions per useful energy delivered (in the unit of megajoule delivered, MJd). Compared with the wood combustion emissions, LPG burning also emits a lower fraction of higher molecular weight PAHs. In rural regions where LPG and kerosene are unavailable or unaffordable, the forced-draft fan stove is expected to be an alternative because its benzo[a]pyrene (B[a]P) emission factor (5.17-8.24 ?g B[a]P/MJd) and emission rate (0.522-0.583 ?g B[a]P/min) are similar to those of kerosene burning (5.36 ?g B[a]P/MJd and 0.452 ?g B[a]P/min). Relatively large PAH emission variability for LPG suggests a need for additional future tests to identify the major factors influencing these combustion emissions. These future tests should also account for different LPG fuel formulations and stove burner types.

SUBMITTER: Shen G

PROVIDER: S-EPMC6145494 | biostudies-literature | 2017

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Polycyclic Aromatic Hydrocarbons in Fine Particulate Matter Emitted from Burning Kerosene, Liquid Petroleum Gas, and Wood Fuels in Household Cookstoves.

Shen Guofeng G Preston William W Ebersviller Seth M SM Williams Craig C Faircloth Jerroll W JW Jetter James J JJ Hays Michael D MD

Energy & fuels : an American Chemical Society journal 20170101 3

This study measures polycyclic aromatic hydrocarbon (PAH) compositions in particulate matter emissions from residential cookstoves. A variety of fuel and cookstove combinations are investigated, including: (i) liquid petroleum gas (LPG), (ii) kerosene in a wick stove, (iii) wood (10 and 30% moisture content on a wet basis) in a forced-draft fan stove, and (iv) wood in a natural-draft rocket cookstove. The wood burning in the natural-draft stove had the highest PAH emissions followed by the wood ...[more]

PMID: 30245546

Similar Datasets

Project description:N-containing aromatic compounds (NACs) are an important group of light-absorbing molecules in the atmosphere. They are often observed in combustion emissions, but their chemical formulas and structural characteristics remain uncertain. In this study, red oak wood and charcoal fuels were burned in cookstoves using the standard water boiling test (WBT) procedure. Submicron aerosol particles in the cookstove emissions were collected using quartz (Q f ) and polytetrafluoroethylene (PTFE) filter membranes positioned in parallel. A back-up quartz filter (Q b ) was also installed downstream of the PTFE filter to evaluate the effect of sampling artifact on NACs measurements. Liquid chromatography-mass spectroscopy (LC-MS) techniques identified seventeen NAC chemical formulas in the cookstove emissions. The average concentrations of total NACs in Q b samples (0.37 ± 0.31 - 1.79 ± 0.77 μg m-3) were greater than 50% of those observed in the Q f samples (0.51 ± 0.43 - 3.91 ± 2.06 μg m-3), and the Q b to Q f mass ratios of individual NACs had a range of 0.02 - 2.71, indicating that the identified NACs might have substantial fractions remaining in the gas-phase. In comparison to other sources, cookstove emissions from red oak or charcoal fuels did not exhibit unique NAC structural features, but had distinct NACs composition. However, before identifying NACs sources by combining their structural and compositional information, the gas-particle partitioning behaviors of NACs should be further investigated. The average contributions of total NACs to the light absorption of organic matter at λ = 365 nm (1.10 - 2.57%) in Q f and Q b samples (10.7 - 21.0%) are up to 10 times larger than their mass contributions (Q f 0.31 - 1.01%, Q b 1.08 - 3.31%), so the identified NACs are mostly strong light absorbers. To explain more sample extracts absorption, future research is needed to understand the chemical and optical properties of high molecular weight (e.g., MW > 500 Da) entities in particulate matter.

Project description:Biomass pellets are emerging as a cleaner alternative to traditional biomass fuels. The potential benefits of using biomass pellets include improving energy utilization efficiency and reducing emissions of air pollutants. To assess the environmental, climate, and health significance of replacing traditional fuels with biomass pellets, it is critical to measure the emission factors (EFs) of various pollutants from pellet burning. However, only a few field measurements have been conducted on the emissions of carbon monoxide (CO), particulate matter (PM), and polycyclic aromatic hydrocarbons (PAHs) from the combustion of pellets. In this study, pine wood and corn straw pellets were burned in a pellet burner (2.6 kW), and the EFs of CO, organic carbon, elemental carbon, PM, and PAHs (EF(CO), EF(OC), EF(EC), EF(PM), and EF(PAH)) were determined. The average EF(CO), EF(OC), EF(EC), and EF(PM) were 1520 ± 1170, 8.68 ± 11.4, 11.2 ± 8.7, and 188 ± 87 mg/MJ for corn straw pellets and 266 ± 137, 5.74 ± 7.17, 2.02 ± 1.57, and 71.0 ± 54.0 mg/MJ for pine wood pellets, respectively. Total carbonaceous carbon constituted 8 to 14% of the PM mass emitted. The measured values of EF(PAH) for the two pellets were 1.02 ± 0.64 and 0.506 ± 0.360 mg/MJ, respectively. The secondary side air supply in the pellet burner did not change the EFs of most pollutants significantly (p > 0.05). The only exceptions were EF(OC) and EF(PM) for pine wood pellets because of reduced combustion temperatures with the increased air supply. In comparison with EFs for the raw pine wood and corn straw, EF(CO), EF(OC), EF(EC), and EF(PM) for pellets were significantly lower than those for raw fuels (p < 0.05). However, the differences in EF(PAH) were not significant (p > 0.05). Based on the measured EFs and thermal efficiencies, it was estimated that 95, 98, 98, 88, and 71% reductions in the total emissions of CO, OC, EC, PM, and PAHs could be achieved by replacing the raw biomass fuels combusted in traditional cooking stoves with pellets burned in modern pellet burners.

Dataset Information

Polycyclic Aromatic Hydrocarbons in Fine Particulate Matter Emitted from Burning Kerosene, Liquid Petroleum Gas, and Wood Fuels in Household Cookstoves.

Publications

Polycyclic Aromatic Hydrocarbons in Fine Particulate Matter Emitted from Burning Kerosene, Liquid Petroleum Gas, and Wood Fuels in Household Cookstoves.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets