Dataset Information

Outdoor, indoor, and personal black carbon exposure from cookstoves burning solid fuels.

ABSTRACT: Black carbon (BC) emissions from solid fuel combustion are associated with increased morbidity and mortality and are important drivers of climate change. We studied BC measurements, approximated by particulate matter (PM2.5 ) absorbance, in rural Yunnan province, China, whose residents use a variety of solid fuels for cooking and heating including bituminous and anthracite coal, and wood. Measurements were taken over two consecutive 24-h periods from 163 households in 30 villages. PM2.5 absorbance (PMabs ) was measured using an EEL 043 Smoke Stain Reflectometer. PMabs measurements were higher in wood burning households (16.3 × 10(-5) /m) than bituminous and anthracite coal households (12 and 5.1 × 10(-5) /m, respectively). Among bituminous coal users, measurements varied by a factor of two depending on the coal source. Portable stoves (which are lit outdoors and brought indoors for use) were associated with reduced PMabs levels, but no other impact of stove design was observed. Outdoor measurements were positively correlated with and approximately half the level of indoor measurements (r = 0.49, P < 0.01). Measurements of BC (as approximated by PMabs ) in this population are modulated by fuel type and source. This provides valuable insight into potential morbidity, mortality, and climate change contributions of domestic usage of solid fuels.

SUBMITTER: Downward GS

PROVIDER: S-EPMC4826638 | biostudies-literature | 2016 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Outdoor, indoor, and personal black carbon exposure from cookstoves burning solid fuels.

Downward G S GS Hu W W Rothman N N Reiss B B Wu G G Wei F F Xu J J Seow W J WJ Brunekreef B B Chapman R S RS Qing L L Vermeulen R R

Indoor air 20151106 5

Black carbon (BC) emissions from solid fuel combustion are associated with increased morbidity and mortality and are important drivers of climate change. We studied BC measurements, approximated by particulate matter (PM2.5 ) absorbance, in rural Yunnan province, China, whose residents use a variety of solid fuels for cooking and heating including bituminous and anthracite coal, and wood. Measurements were taken over two consecutive 24-h periods from 163 households in 30 villages. PM2.5 absorban ...[more]

PMID: 26452237

Similar Datasets

Project description:Relative importance of multiple indoor and outdoor venues on personal exposure concentrations to pro-carcinogenic polycyclic aromatic hydrocarbons (c-PAHs) remains poorly understood. This is particularly challenging because many c-PAHs share sources and occur as a complex mixture. Accurate and precise apportionment of personal exposure according to exposure venues could aid in the understanding of human health effects due to a given source. Here, we partitioned indoor and personal exposure concentrations to seven c-PAHs and pyrene according to the indoor- and outdoor-origins.A simultaneous, integrated monitoring of personal, indoor and outdoor concentrations of nine PAHs was conducted in 75 homes for a consecutive 48-hour period across a two-year period in Kraków, Poland. Due to few known indoor sources for chrysene, we used this PAH species as a tracer for infiltration of outdoor PAHs. Personal and indoor concentrations of seven c-PAHs and pyrene were apportioned to home indoor, non-home indoor and outdoor origins.Using Chrysenein/Chryseneout as proxy for an infiltration factor, Finf, infiltrated PAHs of outdoor origin are overall higher in concentration than those emitted from the indoor origin. Average contribution by the outdoor sources on B[a]A, B[b]F, and B[k]F were 92%, 79%, and 78% across all seasons, respectively. In contrast, in homes where a household member smoked, average contributions by the outdoor sources on B[ghi]P, B[a]P, D[ah]A, and IP were lower (i.e., 67%, 65%, 67%, and 66%, respectively). Season-averaged contributions by the outdoor sources on personal exposure to B[a]A, B[b]F, and B[k]F were 92%, 74%, and 77%, respectively. On the other hand, season-averaged home indoor source contributions on personal exposure to B[a]A, B[b]F, and B[k]F were estimated at 6%, 15%, and 19%, respectively. Similar contributions by season-averaged home indoor sources on personal exposure were estimated at 28% for B[ghi]P, 31% for B[a]P, 25% for D[ah]A, and 28% for IP.Of the seven c-PAHs, B[a]A, B[b]F, and B[k]F are enriched in indoor and personal exposure concentrations from the outdoor coal-combustion. B[ghi]P, B[a]P, D[a,h]A, and IP, PAHs with some of the highest carcinogenic and mutagenic potencies, are considerably enriched by cigarette smoke in addition to the outdoor sources.

Project description:Emission measurements of black carbon (BC) mass were conducted on a T63 turboshaft engine, operated at idle and cruise power with conventional and alternative fuels, using an Artium LII-300 laser-induced incandescence analyzer (LII) and AVL model 483 micro soot sensor (MSS) photoacoustic instrument using the manufacturer's calibration for both instruments. These measurements were compared with elemental carbon (EC) determined by manual and semicontinuous thermal-optical transmission analyses according to National Institute for Occupational Safety and Health (NIOSH) method 5040 as the reference method. The results indicate that both the LII and MSS instruments show good linear correlation with EC for the two fuels and two engine power conditions evaluated. The LII measurements were observed to be biased high (27-49%) and the MSS measurements were biased low (24-35%) relative to EC. The agreement between the instruments and the reference method was substantially improved by applying a calibration of the instruments against a common BC aerosol source. Test data also suggest that the two instruments show some sensitivity to particle size (or properties related to size), specifically for particles with a geometric mean diameter (GMD) <30 nm. This sensitivity is problematic, since new engines or certain combustion conditions in current engines will produce smaller particles compared with the T63 model tested in this study. Further assessments of instrument performance for particles within this size range are therefore warranted. Implications: Accurate black carbon emission measurements are needed to certify new and in-production commercial aircraft engines. Both the Artium LII-300 and AVL 483 micro soot sensor are currently approved by the International Civil Aviation Organization for this purpose. This study compares the two instruments against elemental carbon (EC) using NIOSH method 5040 as the reference using a T63 turboshaft engine. The results indicate that both instruments correlate reasonably well with EC, and the correlation substantially improved when applying a calibration against a common aerosol source. Sensitivity to particle size may be an issue for both instruments.

Dataset Information

Outdoor, indoor, and personal black carbon exposure from cookstoves burning solid fuels.

Publications

Outdoor, indoor, and personal black carbon exposure from cookstoves burning solid fuels.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets