CTAB-Assisted Fabrication of Bi₂WO₆ Thin Nanoplates with High Adsorption and Enhanced Visible Light-Driven Photocatalytic Performance.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhou Y
PROVIDER: S-EPMC6153929 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:We have explored the impact of the incorporation of various amounts of carbons from varied physicochemical features as additives to Bi₂WO₆ for the photocatalytic degradation of a dye using simulated solar light. Data has revealed that the composition and acidic character of the carbon additive are important parameters in the performance of the Bi₂WO₆/carbon catalysts. The presence of a carbon additive improved the conversion of the dye, evidencing the occurrence of charge transfer reactions that involve radical mediated reactions. The catalysts prepared with 2 and 5 wt.% of carbon additive outperformed the bare semiconductor, despite the shielding effect of the carbon matrix. The acidic nature of the Bi₂WO₆/carbon catalysts governs the degradation pathway (due to the preferential adsorption of the dye), that proceeds via the deethylation of the auxochrome groups of the dye at short irradiation times, followed by the cleavage of the chromophore at long irradiation times. Regarding the characteristics of the carbons, the photocatalytic degradation rate is accelerated by carbons of acidic character and high oxygen content, whereas the porosity seems to play a minor role. The presence of the carbon additives also affects the toxicity of the treated solutions, rendering lower values after shorter irradiation periods.
| S-EPMC6384959 | biostudies-literature
Project description:Bi2WO6 as a high visible-light-driven catalyst has been aroused broad interest. However, it can only be excitated by the light with λ < 450 nm and the solar energy utilization need to be improved. Here, the wide-range-visible photoresponse Bi2WO6-x nanoplates were fabricated by introducing surface oxygen vacancies through the controllable hydrogen reduction method. The visible photoresponse wavelength range is extended from 450 nm to more than 600 nm. In addition, the photocatalytic activity of Bi2WO6-x is also increased and is 2.1 times as high as that of pristine Bi2WO6. The extending of the photoresponse range and the enhancement of the photoactivity both can be attributed to the surface-oxygen-vacancy states. This is because surface-oxygen-vacancy states generated above and partly overlapping of with the valence band (VB) will result in the rising of valence band maximum (VBM), thus broadening the VB width. This approach is proposed to develop many types of wide-range-visible optical materials and to be applicable to many narrow and wide bandgap materials.
| S-EPMC4726091 | biostudies-literature
Project description:A highly efficient novel photocatalyst consisting of nitrogen-carbon dots (N-CDs) and three-dimensional (3D) hierarchical BiOBr was synthesized via a simple ultrasonic-assisted method and used for the degradation of hazardous dyes. Deposition of N-CDs onto the surface of BiOBr was confirmed through structure and composition characterizations. The N-CDs/BiOBr composites exhibited superior activity for organic contaminant degradation under visible light and the 1 wt% N-CDs/BiOBr composite showed the highest degradation rate, indicating that N-CDs/BiOBr composites have great potential for application in mitigating hazardous contaminants. The N-CDs played an important role in improving the photocatalytic performance, owing to the enhancement of up-converted photoluminescence behavior as well as the efficient separation of photogenerated charge carriers originating from the intimately contacted interface. A possible photocatalytic mechanism was proposed based on the experimental results.
| S-EPMC5361154 | biostudies-literature
Project description:The three-dimensional flower-like Bi2WO6 was synthesized through a one-step microwave method (the reaction temperature was 434 K and the reaction took 10 min) with the assistance of ethanolamine (EA). The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, ultraviolet-visible spectroscopy, PL, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller analysis. Methyl orange was used as target pollutant to evaluate the photocatalysis property of samples. Furthermore, the influence of the mechanism of EA on the structure and catalytic performance of Bi2WO6 was discussed. The detailed characterizations revealed that the three-dimensional flower-like Bi2WO6 was successfully synthesized with the assistance of EA. The results confirmed that EA significantly influenced the morphology of Bi2WO6 products. The addition of EA can effectively alter the pressure of the reaction and improve the crystal phase and structure of Bi2WO6 photocatalysts, enhancing the photocatalytic activity of samples and improving the photocatalytic efficiency. EA can serve as an assembling agent and structure-directing agent resulting in the formation of flower-like architectures. With the increase of the amount of EA, the as-prepared Bi2WO6 sample gradually forms a flower-like structure, leading to a shorter time of light holes migrating to the surface of the catalyst. It makes the compound rate significantly decreased, and improves the photocatalytic efficiency of the sample.
| S-EPMC6458385 | biostudies-literature
Project description:Photocatalytic degradation of organic pollution is a vital path to deal with environmental problems. Here, a direct Z-scheme 2D/2D heterojunction of a Fe3O4/Bi2WO6 photocatalyst is fabricated for the degradation of ciprofloxacin by a self-assembly strategy. Furthermore, to characterize the morphology of the obtained composite photocatalysts, various kinds of characterization methods were employed like XRD, XPS, SEM, and TEM. It is indicated that the flower-like photocatalyst is composed of nanosheets. Comparable photocatalysts were prepared by controlling the hydrothermal temperature and the iron content. In the photocatalytic degradation of ciprofloxacin (CIP) in water, under visible light irradiation, FB-180 (synthesized at 180 °C with 4% iron content) presents approximately 99.7% degradation efficiency in only 15 min. Meanwhile, during photocatalytic degradation reactions, the Fe3O4/Bi2WO6 heterojunction also displayed excellent stability, which still kept above 90% degradation efficiency after five consecutive cycles. UV-Vis DRS and M-S analyses showed that the Fe3O4/Bi2WO6 catalyst has a strong visible light absorption capacity and the transfer pathway of photo-induced charge carriers. PL, EIS, and TPR showed that Fe3O4/Bi2WO6 has an efficient separation and transfer rate of the photo-generated carriers. ESR analysis proved that the superoxide radical (•O2 -) and hydroxyl radical (•OH) play a major role in the Fe3O4/Bi2WO6 photocatalytic system. This special 2D/2D heterojunction we proposed may have huge potential for marine pollution treatment by photocatalysis degradation with dramatically boosted activities.
| S-EPMC7818623 | biostudies-literature
Project description:In order to develop original and efficient visible light response photocatalysts for degrading organic pollutants in wastewater, new photocatalysts Bi₂GaSbO₇ and Bi₂InSbO₇ were firstly synthesized by a solid-state reaction method and their chemical, physical and structural properties were characterized. Bi₂GaSbO₇ and Bi₂InSbO₇ were crystallized with a pyrochlore-type structure and the lattice parameter of Bi₂GaSbO₇ or Bi₂InSbO₇ was 10.356497 Å or 10.666031 Å. The band gap of Bi₂GaSbO₇ or Bi₂InSbO₇ was estimated to be 2.59 eV or 2.54 eV. Compared with nitrogen doped TiO₂, Bi₂GaSbO₇ and Bi₂InSbO₇, both showed excellent photocatalytic activities for degrading methylene blue during visible light irradiation due to their narrower band gaps and higher crystallization perfection. Bi₂GaSbO₇ showed higher catalytic activity compared with Bi₂InSbO₇. The photocatalytic degradation of methylene blue followed by the first-order reaction kinetics and the first-order rate constant was 0.01470 min-1, 0.00967 min-1 or 0.00259 min-1 with Bi₂GaSbO₇, Bi₂InSbO₇ or nitrogen doped TiO₂ as a catalyst. The evolution of CO₂ and the removal of total organic carbon were successfully measured and these results indicated continuous mineralization of methylene blue during the photocatalytic process. The possible degradation scheme and pathway of methylene blue was also analyzed. Bi₂GaSbO₇ and Bi₂InSbO₇ photocatalysts both had great potential to purify textile industry wastewater.
| S-EPMC5456611 | biostudies-other
Project description:A heterojunction catalyst, BiVO4/P25, was successfully fabricated using a one-step hydrothermal method. The prepared composite was characterized using XRD, XPS, Raman, FT-IR, UV-vis, SEM, HRTEM and PL. The HRTEM pictures revealed that the heterostructured composite was composed of BiVO4 and P25, and from the pictures of SEM we could see the P25 nanoparticles assembling on the surface of flower-shaped BiVO4 nanostructures. The XPS spectra showed that the prepared catalyst consisted of Bi, V, O, Ti and C. The photocatalytic activity of BiVO4/P25 was evaluated by degraded methyl blue (MB) and tetracycline under visible light illumination (? > 420 nm), and the results showed that BiVO4/P25 composite has a better photocatalytic performance compared with pure BiVO4 and the most active c-BiVO4/P25 sample showed enough catalytic stability after three successive reuses for MB photodegradation. The enhanced photocatalytic performance could mainly be attributed to the better optical absorption ability and good absorption ability of organic contaminants.
| S-EPMC6124025 | biostudies-literature
Project description:HIGHLIGHTS A facial method was used to fabricate BiOI/BiOCl film at room temperature.30% BiOI/BiOCl showed an excellent photocatalytic activity and stability.Improvement of photocatalytic activity was owed to expanded visible light absorption and high separation efficiency of charge. Photocatalysis has been considered to be one of the most promising ways to photodegrade organic pollutants. Herein, a series of BiOI/BiOCl films coating on FTO were fabricated through a simple method at room temperature. The photocatalytic efficiency of 30%BiOI/BiOCl could reach more than 99% aiming to degrading RhB and MB after 90 and 120 min, respectively. Compared with BiOCl, 30%BiOI/BiOCl showed 12 times higher efficiency when degrading RhB. In comparison with BiOI, 30%BiOI/BiOCl showed 5 and 6 times higher efficiency when degrading RhB and MB, respectively. These obvious enhancements were attributed to expanded visible light absorption and high separation performance of photoinduced charge. Moreover, the photocatalytic activity of 30%BiOI/BiOCl had no obvious decrease after five recycles, suggesting that it was a promising photocatalyst for the removal of MB and RhB pollutants. Finally, the possible growth process for the BiOI/BiOCl thin films and photocatalysis mechanism were investigated in details. This work would provide insight to the reasonable construction of BiOX heterojunction and the photocatalytic mechanism in degrading organic pollutants.
| S-EPMC5857602 | biostudies-literature
Project description:Different approaches like doping and sensitization have been used to develop photocatalysts that can lead to high reactivity under visible-light illumination, which would allow efficient utilization of solar irradiation and even interior lighting. We demonstrated a conceptually different approach by changing reaction route via introducing the idea of conventional Pd catalysis used in cross-coupling reactions into photocatalysis. The -O-Pd-Cl surface species modified on Ni-doped TiO2 can play a role the same as that in chemical catalysis, resulting in remarkably enhanced photocatalytic activity under visible-light irradiation. For instance, Pd/Ni-TiO2 has much higher activity than N-TiO2 (about 3 ~ 9 times for all of the 4-XP systems) upon irradiation with wavelength of 420 nm. The catalytically active Pd(0) is achieved by reduction of photogenerated electrons from Ni-TiO2. Given high efficient, stable Pd catalysts or other suitable chemical catalysts, this concept may enable realization of the practical applications of photocatalysis.
| S-EPMC5380333 | biostudies-literature
Project description:This study investigates the photocatalytic degradation of amoxicillin (AMO) by simulated solar irradiation using WO3 as a catalyst. A three-factor-three-level Box-Behnken design (BBD) consisting of 30 experimental runs is employed with three independent variables: initial AMO concentration, catalyst dosage, and pH. The experimental results are analyzed in terms of AMO degradation and mineralization, the latter of which is measured using dissolved organic carbon (DOC). The results show that the photocatalytic degradation of AMO follows pseudo-first-order kinetics. AMO degradation efficiency and the pseudo-first-order rate constants decrease with increasing initial AMO concentration and pH and increase with increasing catalyst dosage. Though AMO degradation is almost fully complete under the experimental conditions, DOC removal is much lower; the highest DOC removal rate is 35.82% after 180 min. Using these experimental results, second-order polynomial response surface models for AMO and DOC removal are constructed. In the AMO removal model, the first-order terms are the most significant contributors to the prediction, followed by the quadratic and interaction terms. Initial AMO concentration and pH have a significant negative impact on the photocatalytic degradation of AMO, while catalyst dosage has a significant positive impact. In contrast, in the DOC removal model, the quadratic terms make the most significant contribution to the prediction and the first-order terms the least. The optimal conditions for the photocatalytic degradation of AMO are found to be an initial AMO concentration of 1.0 μM, a catalyst dosage of 0.104 g/L, and a pH of 4, under which almost complete removal of AMO is achieved (99.99%).
| S-EPMC6597549 | biostudies-literature