Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Simple separation of good quality bovine oocytes using a microfluidic device.

ABSTRACT: We fabricated a simple microfluidic device for separation of bovine oocytes based on the oocyte quality to improve the conception rate of in vitro fertilization (IVF) by using good quality oocytes. The microfluidic device separates oocytes based on sedimentation rate differences in a sucrose buffer, which is dependent on oocyte quality. The microfluidic device has a 700?µm width, 1?mm height, and 10?mm long separation channel. Oocytes were injected from the upper half of the separation channel, and they flowed while sinking. The outlets of the separation channel were divided into upper and lower chambers. Good quality oocytes settled faster than poor quality oocytes in sucrose buffer; therefore, good quality oocytes were collected from the lower outlet. We performed IVF after the microfluidic separation of oocytes. The developmental rate to blastocysts of oocytes collected from the lower outlet was significantly higher than those collected from the upper outlet (36.0% vs. 14.1%). This result was comparable to that in the BCB staining method performed as a comparison method (BCB+?: 35.7%, BCB-: 15.4%). These findings indicate that our microfluidic device could be applied to oocyte separation and contribute to improvement of in vitro embryo production system.

SUBMITTER: Iwasaki W

PROVIDER: S-EPMC6155318 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Rheotaxis-based sperm separation using a biomimicry microfluidic device.

Project description:Sperm selection is crucial to assisted reproduction, influencing the success rate of the treatment cycle and offspring health. However, in the current clinical sperm selection practices, bypassing almost all the natural selection barriers is a major concern. Here, we present a biomimicry microfluidic method, inspired by the anatomy of the female reproductive tract, that separates motile sperm based on their rheotaxis behavior to swim against the flow into low shear rate regions. The device includes micropocket geometries that recall the oval-shaped microstructures of the female fallopian tube to create shear protected zones for sperm separation. Clinical tests with human samples indicate that the device is capable of isolating viable and highly motile sperm based on their rheotaxis responses, resulting in a separation efficiency of 100%. The device presents an automated alternative for the current sperm selection practices in assisted reproduction.

| S-EPMC8443654 | biostudies-literature

Dual-neodymium magnet-based microfluidic separation device.

Project description:Microfluidic-based separation methods have been highlighted for a number of biological applications, such as single cell analysis, disease diagnostics, and therapeutics. Although a number of previous studies have been carried out to minimize the physical damage and chemical deformations of the sample during the separation process, it still remains a challenge. In this paper, we developed a microfluidic device with dual-neodymium magnet-based negative magnetophoresis for the separation of the microparticles and cells. The poly(ethylene oxide) (PEO) was added to the solution to increase the viscoelasticity of the medium which could assist the sorting of the microparticles in the microfluidic device even at low flow rates, while minimizing damage to the cells and microparticles. Following this method, it was possible to separate 10 and 16 μm microparticles with high efficiency of 99 ± 0.1%, and 97 ± 0.8%, respectively. We also demonstrated the separation of glioblastoma cancer cells and neural stem cells (NSCs) in the microfluidic device.

| S-EPMC6602928 | biostudies-literature

A microfluidic device for epigenomic profiling using 100 cells

Project description:We developed the microfluidic-oscillatory-washing-based ChIP-Seq (MOWChIP-Seq) protocol. We achieved genome-wide mapping of histone modifications (H3K4me3 and H3K27ac) with as few as 100 cells. Moreover, the automated microfluidic platform dramatically reduced assay time and has a potential for future scale-up.

2015-07-21 | GSE65516 | GEO

Stiffness dependent separation of cells in a microfluidic device.

Project description:Abnormal cell mechanical stiffness can point to the development of various diseases including cancers and infections. We report a new microfluidic technique for continuous cell separation utilizing variation in cell stiffness. We use a microfluidic channel decorated by periodic diagonal ridges that compress the flowing cells in rapid succession. The compression in combination with secondary flows in the ridged microfluidic channel translates each cell perpendicular to the channel axis in proportion to its stiffness. We demonstrate the physical principle of the cell sorting mechanism and show that our microfluidic approach can be effectively used to separate a variety of cell types which are similar in size but of different stiffnesses, spanning a range from 210 Pa to 23 kPa. Atomic force microscopy is used to directly measure the stiffness of the separated cells and we found that the trajectories in the microchannel correlated to stiffness. We have demonstrated that the current processing throughput is 250 cells per second. This microfluidic separation technique opens new ways for conducting rapid and low-cost cell analysis and disease diagnostics through biophysical markers.

| S-EPMC3797716 | biostudies-literature

Continuous Separation of Circulating Tumor Cells from Whole Blood Using a Slanted Weir Microfluidic Device.

Project description:The separation of circulating tumor cells (CTCs) from the peripheral blood is an important issue that has been highlighted because of their high clinical potential. However, techniques that depend solely on tumor-specific surface molecules or just the larger size of CTCs are limited by tumor heterogeneity. Here, we present a slanted weir microfluidic device that utilizes the size and deformability of CTCs to separate them from the unprocessed whole blood. By testing its ability using a highly invasive breast cancer cell line, our device achieved a 97% separation efficiency, while showing an 8-log depletion of erythrocytes and 5.6-log depletion of leukocytes. We also developed an image analysis tool that was able to characterize the various morphologies and differing deformability of the separating cells. From the results, we believe our system possesses a high potential for liquid biopsy, aiding future cancer research.

| S-EPMC6406949 | biostudies-literature

Growth of Diffraction-Quality Protein Crystals Using a Harvestable Microfluidic Device.

Project description:Protein crystallization is the major bottleneck in the entire process of protein crystallography, and obtaining diffraction-quality crystals can be unpredictable and sometimes exceptionally difficult, requiring many rounds of high-throughput screening. Recently, a more time- and cost-saving strategy to use the commercially available microfluidic devices called Crystal Formers has emerged. Herein we show the application of such a device using a protein from Legionella pneumophila called LidL that is predicted to be involved in the ability to efficiently manipulate host cell trafficking events once internalized by the host cell. After setting up just one 96-channel Crystal Former tray, we were able to obtain a diffraction-quality crystal that diffracted to 2.76 Å. These results show that Crystal Formers can be used to screen and optimize crystals to directly produce crystals for structure determination.

| S-EPMC4082397 | biostudies-other

Concurrent DNA Preconcentration and Separation in Bipolar Electrode-Based Microfluidic Device.

Project description:This paper presents a bipolar electrode (BPE) device in a microfluidic dual-channel design for concurrent preconcentration and separation of composite DNA containing samples. The novelty of the present effort relies on the combination of BPE-induced ion concentration polarization (ICP) and end-labeled free-solution electrophoresis (ELFSE). The ion concentration polarization effect arising from the faradaic reaction on the BPE is utilized to exert opposing electrophoretic and electroosmotic forces on the DNA samples. Meanwhile, end-labeled free-solution electrophoresis alters the mass-charge ratio to enable simultaneous DNA separation in free solution. The microfluidic device was fabricated using standard and soft lithography techniques to form gold-on-glass electrode capped with a PDMS microfluidic channel. Experimental testing with various DNA samples was carried out over a range of applied electric field. Concentration ratios up to 285× within 5 minutes for a 102-mer DNA, and concurrent preconcentration and free-solution separation of binary mixture of free and bound 102-mer DNA within 6 minutes was demonstrated. The effect of applied electric field was also interrogated with respect to pertinent performance metrics of preconcentration and separation.

| S-EPMC4437544 | biostudies-literature

Inertia-Acoustophoresis Hybrid Microfluidic Device for Rapid and Efficient Cell Separation.

Project description:In this paper, we proposed an integrated microfluidic device that could demonstrate the non-contact, label-free separation of particles and cells through the combination of inertial microfluidics and acoustophoresis. The proposed device integrated two microfluidic chips which were a PDMS channel chip on top of the silicon-based acoustofluidic chip. The PDMS chip worked by prefocusing the particles/cells through inducing the inertial force of the channel structure. The connected acoustofluidic chips separated particles based on their size through an acoustic radiation force. In the serpentine-shaped PDMS chip, particles formed two lines focusing in the channel, and a trifugal-shaped acoustofluidic chip displaced and separated particles, in which larger particles focused on the central channel and smaller ones moved to the side channels. The simultaneous fluidic works allowed high-efficiency particle separation. Using this novel acoustofluidic device with an inertial microchannel, the separation of particles and cells based on their size was presented and analyzed, and the efficiency of the device was shown. The device demonstrated excellent separation performance with a high recovery ratio (up to 96.3%), separation efficiency (up to 99%), and high volume rate (>100 µL/min). Our results showed that integrated devices could be a viable alternative to current cell separation based on their low cost, reduced sample consumption and high throughput capability.

| S-EPMC9268962 | biostudies-literature

Citizen-led sampling to monitor phosphate levels in freshwater environments using a simple paper microfluidic device.

Project description:Contamination of waterways is of increasing concern, with recent studies demonstrating elevated levels of antibiotics, antidepressants, household, agricultural and industrial chemicals in freshwater systems. Thus, there is a growing demand for methods to rapidly and conveniently monitor contaminants in waterways. Here we demonstrate how a combination of paper microfluidic devices and handheld mobile technology can be used by citizen scientists to carry out a sustained water monitoring campaign. We have developed a paper-based analytical device and a 3 minute sampling workflow that requires no more than a container, a test device and a smartphone app. The contaminant measured in these pilots are phosphates, detectable down to 3 mg L-1. Together these allow volunteers to successfully carry out cost-effective, high frequency, phosphate monitoring over an extended geographies and periods.

| S-EPMC8659362 | biostudies-literature

Simple microfluidic device for studying chemotaxis in response to dual gradients.

Project description:Chemotaxis is a fundamental biological process where complex chemotactic gradients are integrated and prioritized to guide cell migration toward specific locations. To understand the mechanisms of gradient dependent cell migration, it is important to develop in vitro models that recapitulate key attributes of the chemotactic cues present in vivo. Current in vitro tools for studying cell migration are not amenable to easily study the response of neutrophils to dual gradients. Many of these systems require external pumps and complex setups to establish and maintain the gradients. Here we report a simple yet innovative microfluidic device for studying cell migration in the presence of dual chemotactic gradients through a 3-dimensional substrate. The device is tested and validated by studying the migration of the neutrophil-like cell line PLB-985 to gradients of fMLP. Furthermore, the device is expanded and used with heparinised whole blood, whereupon neutrophils were observed to migrate from whole blood towards gradients of fMLP eliminating the need for any neutrophil purification or capture steps.

| S-EPMC4768479 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data