Dataset Information

Simple method for fabricating scattering layer using random nanoscale rods for improving optical properties of organic light-emitting diodes.

ABSTRACT: We investigated a low-temperature mask-free process for preparing random nanoscale rods (RNRs) as a scattering layer. The process involves spin coating and dry etching, which are already widely applied in industry. Our film exhibited 17-33% optical haze at 520?nm wavelength and 95% total transmittance in the visible range. Therefore, this film can be used as a scattering layer for improving viewing angle characteristics and decreasing substrate mode loss in organic light-emitting diodes (OLEDs). Specifically, we focussed on varying the height and density of the RNRs to control the optical characteristics. As a result, the OLEDs with RNRs revealed a variation in colour coordinates of ?(x, y)?=?(0.007, 0.014) for a change in the viewing angle, which was superior to those without the RNRs that displayed a variation of ?(x, y)?=?(0.020, 0.034) in CIE 1931. Moreover, the OLEDs with RNRs exhibited 31% enhanced external quantum efficiency compared to those of the OLEDs with the bare substrate. The flexibility of the polymer used for the RNRs and the plasma treatment suggests that the RNRs can be applied to flexible OLED displays and lighting systems.

SUBMITTER: Kwack JH

PROVIDER: S-EPMC6156328 | biostudies-literature | 2018 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Simple method for fabricating scattering layer using random nanoscale rods for improving optical properties of organic light-emitting diodes.

Kwack Jin Ho JH Choi Junhee J Park Cheol Hwee CH Hwang Ha H Park Young Wook YW Ju Byeong-Kwon BK

Scientific reports 20180925 1

We investigated a low-temperature mask-free process for preparing random nanoscale rods (RNRs) as a scattering layer. The process involves spin coating and dry etching, which are already widely applied in industry. Our film exhibited 17-33% optical haze at 520 nm wavelength and 95% total transmittance in the visible range. Therefore, this film can be used as a scattering layer for improving viewing angle characteristics and decreasing substrate mode loss in organic light-emitting diodes (OLEDs). ...[more]

PMID: 30254286

Similar Datasets

Project description:Light colors may affect poultry behaviors, well-being and performance. However, preferences of layer pullets for light colors are not fully understood. This study was conducted to investigate the pullet preferences for four light-emitting diode colors, including white, red, green and blue, in a lighting preference test system. The system contained four identical compartments each provided with a respective light color. The pullets were able to move freely between the adjacent compartments. A total of three groups of 20 Chinese domestic Jingfen layer pullets (54 to 82 days of age) were used for the test. Pullet behaviors were continuously recorded and summarized for each light color/compartment into daily time spent (DTS), daily percentage of time spent (DPTS), daily times of visit (DTV), duration per visit, daily feed intake (DFI), daily feeding time (DFT), feeding rate (FR), distribution of pullet occupancy and hourly time spent. The results showed that the DTS (h/pullet·per day) were 3.9±0.4 under white, 1.4±0.3 under red, 2.2±0.3 under green and 4.5±0.4 under blue light, respectively. The DTS corresponded to 11.7% to 37.6% DPTS in 12-h lighting periods. The DTV (times/pullet·per day) were 84±5 under white, 48±10 under red, 88±10 under green and 94±8 under blue light. Each visit lasted 1.5 to 3.2 min. The DFI (g/pullet·per day) were 27.6±1.7 under white, 7.1±1.6 under red, 15.1±1.1 under green and 23.1±2.0 under blue light. The DFT was 0.18 to 0.65 h/pullet·per day and the FR was 0.57 to 0.75 g/min. For most of the time during the lighting periods, six to 10 birds stayed under white, and one to five birds stayed under red, green and blue light. Pullets preferred to stay under blue light when the light was on and under white light 4 h before the light off. Overall, pullets preferred blue light the most and red light the least. These findings substantiate the preferences of layer pullets for light colors, providing insights for use in the management of light-emitting diode colors to meet pullet needs.

Dataset Information

Simple method for fabricating scattering layer using random nanoscale rods for improving optical properties of organic light-emitting diodes.

Publications

Simple method for fabricating scattering layer using random nanoscale rods for improving optical properties of organic light-emitting diodes.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets