Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data of numerical simulation and experimental research on the design of a cyclone separator with a high flux density.

ABSTRACT: This article contains data related to the research article entitled "Cyclone separator for gas-liquid mixture with high flux density" (Mikheev et al., 2018 [1]doi: 10.1016/j.powtec.2018.08.040). This work was aimed at the development of an effective gas-liquid cyclone separator at a high flux density. Within the implementation of the project, the goal was to choose the schematic construction of the separator provides the reduced dynamic head of flow in the zones with increased liquid phase concentration to prevent the entrainment of separated liquid and layer losses. The paper presents the numerical simulation data and experimental data allowed estimation of separation efficiency of the separator.

SUBMITTER: Mikheev N

PROVIDER: S-EPMC6169372 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data of numerical simulation and experimental research on the design of a cyclone separator with a high flux density.

Mikheev Nikolay N Saushin Ilya I Goltsman Anna A Fafurin Victor V

Data in brief 20180907

This article contains data related to the research article entitled "Cyclone separator for gas-liquid mixture with high flux density" (Mikheev et al., 2018 [1]doi: 10.1016/j.powtec.2018.08.040). This work was aimed at the development of an effective gas-liquid cyclone separator at a high flux density. Within the implementation of the project, the goal was to choose the schematic construction of the separator provides the reduced dynamic head of flow in the zones with increased liquid phase conce ...[more]

PMID: 30294632

Similar Datasets

Numerical simulation and structural optimization of the inclined oil/water separator.

Project description:Improving the separation efficiency of the inclined oil/water separator, a new type of gravity separation equipment, is of great importance. In order to obtain a comprehensive understanding of the internal flow field of the separation process of oil and water within this separator, a numerical simulation based on Euler multiphase flow analysis and the realizable k-? two equation turbulence model was executed using Fluent software. The optimal value ranges of the separator's various structural parameters used in the numerical simulation were selected through orthogonal array experiments. A field experiment on the separator was conducted with optimized structural parameters in order to validate the reliability of the numerical simulation results. The research results indicated that the horizontal position of the dispenser, the hole number, and the diameter had significant effects on the oil/water separation efficiency, and that the longitudinal position of the dispenser and the position of the weir plate had insignificant effects on the oil/water separation efficiency. The optimal structural parameters obtained through the orthogonal array experiments resulted in an oil/water separation efficiency of up to 95%, which was 4.996% greater than that realized by the original structural parameters.

| S-EPMC4395151 | biostudies-literature

Polymer Injectivity Test Design Using Numerical Simulation.

Project description:Polymer flooding is an enhanced oil recovery (EOR) process, which has received increasing interest in the industry. In this process, water-soluble polymers are used to increase injected water viscosity in order to improve mobility ratio and hence improve reservoir sweep. Polymer solutions are non-Newtonian fluids, i.e., their viscosities are shear dependent. Polymers may exhibit an increase in viscosity at high shear rates in porous media, which can cause injectivity loss. In contrast, at low shear rates they may observe viscosity loss and hence enhance the injectivity. Therefore, due to the complex non-Newtonian rheology of polymers, it is necessary to optimize the design of polymer injectivity tests in order to improve our understanding of the rheology behavior and enhance the design of polymer flood projects. This study has been addressing what information that can be gained from polymer injectivity tests, and how to design the test for maximizing information. The main source of information in the field is from the injection bottom-hole pressure (BHP). Simulation studies have analyzed the response of different non-Newtonian rheology on BHP with variations of rate and time. The results have shown that BHP from injectivity tests can be used to detect in-situ polymer rheology.

| S-EPMC7240407 | biostudies-literature

Lattice Boltzmann numerical simulation and experimental research of dynamic flow in an expansion-contraction microchannel.

Project description:This paper applies the lattice Boltzmann method (LBM) to a 3D simulation of micro flows in an expansion-contraction microchannel. We investigate the flow field under various inlet flow rates and cavity structures, and then systematically study the flow features of the vortex and Dean flow in this channel. Vortex formation analysis demonstrates that there is no observable vortex generated when the inlet flow rate is low enough. As the inlet flow rate increases, a small vortex first appears near the inlet, and then this vortex region will keep expanding until it fully occupies the cavity. A smaller cavity width may result in a larger vortex but the vortex is less influenced by cavity length. The Dean flow features at the outlet become more apparent with increasing inlet flow rate and more recirculation regions can be observed in the cross-section under over high inlet flow rate. In order to support the simulation results, some experimental processes are conducted successfully. It validates that the applied model can accurately characterize the flow in the microchannel. Results of simulations and experiments in this paper provide insights into the design and operation of microfluidic systems for particle/cell manipulation.

| S-EPMC3710248 | biostudies-other

Experimental Studies and Numerical Simulation of Polypyrrole Trilayer Actuators.

Project description:Conducting polymer actuators have shown wide application prospects in the field of biomedical sensors and micro-/nanorobotics. In order to explore more applications in biomedical sensing and robotics, it is essential to understand the actuator static behavior from an engineering perspective, before incorporating them into a design. In this article, we have established the mathematical model of a trilayer polypyrrole (PPy) cantilever actuator and validated it experimentally. The model helps in enhancing the efficiency and in improving the performance, predictability, and control of the actuator. The thermal expansion analogy, which is similar to volume change of the multilayer PPy actuator due to ion migration, has been considered to develop a mathematical model in COMSOL Multiphysics. To further validate the actuator deformation predicted by the mathematical modeling, a multilayer PPy actuator was fabricated by electrochemical synthesis and the experimentally determined deflection of the actuator was compared to simulation data. Both the theoretical and experimental results depict that the model is effective for predicting the bending behavior of multilayer PPy actuators at different input voltages.

| S-EPMC6648300 | biostudies-literature

Fuzzy Logic-Based Control for a Morphing Wing Tip Actuation System: Design, Numerical Simulation, and Wind Tunnel Experimental Testing.

Project description:The paper presents the design, numerical simulation, and wind tunnel experimental testing of a fuzzy logic-based control system for a new morphing wing actuation system equipped with Brushless DC (BLDC) motors, under the framework of an international project between Canada and Italy. Morphing wing is a prime concern of the aviation industry and, due to the promising results, it can improve fuel optimization. In this idea, a major international morphing wing project has been carried out by our university team from Canada, in collaboration with industrial, research, and university entities from our country, but also from Italy, by using a full-scaled portion of a real aircraft wing equipped with an aileron. The target was to conceive, manufacture, and test an experimental wing model able to be morphed in a controlled manner and to provide in this way an extension of the laminar airflow region over its upper surface, producing a drag reduction with direct impact on the fuel consumption economy. The work presented in the paper aims to describe how the experimental model has been developed, controlled, and tested, to prove the feasibility of the morphing wing technology for the next generation of aircraft.

| S-EPMC6963750 | biostudies-literature

Numerical simulation data for the dynamic properties of rainbow metamaterials.

Project description:Simulation data are presented for identifying and analysing the dynamic properties of the rainbow metamaterials as presented in the articles "Rainbow metamaterials for broadband multi-frequency vibration attenuation: numerical analysis and experimental validation" (Meng et al., 2019 [1]) and "Optimal design of rainbow elastic metamaterials" (Meng et al., 2019 [2]). In this data article, the frequency response functions and mode shapes of the rainbow metamaterials are numerically calculated by Finite Element models set up in Ansys Mechanical APDL. Harmonic analysis was performed to figure out the receptance function values of the rainbow metamaterials within the frequency regime 0-500 Hz. Modal analysis was applied to estimate the mode shapes, which could be used to explain the critical peaks and dips in the receptance function curve. Source files of Finite Element models are provided in the data. The Finite Element simulation is not only an effective alternative way to estimate the dynamic properties of the rainbow metamaterials, the mode shape analysis, which is unlikely to be achieved with the analytical model, provides direct insights into the underlying vibration mechanism of the rainbow metamaterials.

| S-EPMC6909204 | biostudies-literature

Numerical data on heat flux of a novel controlled-temperature double skin facade.

Project description:Hourly heat flux for variant boundary conditions of a novel controlled-temperature double skin façade (DSF) building element in a two- dimensional time- dependent study was determined. The building element is subjected to boundary conditions, characterizing different orientations (azimuth 0°, 90°, 180°, 270°) and climatic conditions of the four seasons. This data article provides detailed numerical data on the hourly heat flux, temperatures attained at the exterior and within the building element for six different geometries and for the variant boundary conditions under study. The external boundary conditions were determined with the use of the PVGIS tool, corrected in accordance to the sol-air temperature equation. The numerical simulation studies were performed with the use of the computational fluid dynamics (CFD) tool Comsol Multiphysics [2].

| S-EPMC8257991 | biostudies-literature

Numerical simulation and experimental validation of the ventilation system performance in a heated room.

Project description:The time spent by the occupant indoor the building is significant; therefore, the central objective of the major research was the evaluation of the thermal sensation for the existing people. This study examines the numerical simulation in a room containing a manikin sitting in front of a computer. The computational fluid dynamics (CFD) tools were considered using ANSYS Fluent 16.2 software. This software exploits the finite volume method that is based on the resolution of the Navier-Stokes equations. The distribution of the temperature, velocity, static pressure, turbulent kinetic energy, turbulent viscosity, and turbulent dissipation is tested in different planes and different directions to characterize the airflow indoor a heated room. Equally, the thermal comfort is examined by calculating the predicted mean vote (PMV). The comparison between the numerical results and the experimental data founded from the literature prove that the supply of airflow was affected by the presence of the heat sources and the thermal climate is considered as a slightly hot. The use of the adequate meshes is in a good agreement with the experimental data and confirms the validity of the numerical approach.

| S-EPMC7473412 | biostudies-literature

Input data for mathematical modeling and numerical simulation of switched reluctance machines.

Project description:The modeling and simulation of Switched Reluctance (SR) machine and drives is challenging for its dual pole salient structure and magnetic saturation. This paper presents the input data in form of experimentally obtained magnetization characteristics. This data was used for computer simulation based model of SR machine, "Selecting Best Interpolation Technique for Simulation Modeling of Switched Reluctance Machine" [1], "Modeling of Static Characteristics of Switched Reluctance Motor" [2]. This data is primary source of other data tables of co energy and static torque which are also among the required data essential for the simulation and can be derived from this data. The procedure and experimental setup for collection of the data is presented in detail.

| S-EPMC5567386 | biostudies-literature

Numerical simulation data of building integrated solar thermal collectors under diverse conditions

Project description:This dataset presents the thermal performance of building-integrated flat solar collectors with a uniform and multiple riser structure. The input data of the numerical model were obtained with the use of the PVGIS tool. Solar radiation and ambient temperature values at slopes 0°, 45°, and 90° were extracted and used as boundary conditions. Numerical calculations were carried using Finite Element (FE) analysis. Three-dimensional transient models were developed to calculate the investigated configurations’ thermal performance based on the environmental temperature, the solar radiation, and the inclination angle. The numerical model was validated with the use of an experimental data set showing a good agreement between the two models with RMSE of 5%. Data of hourly heat flux through the building masonry with the building-integrated solar collector and the average fluid temperature of each system is presented.

| S-EPMC8529080 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data