Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of binder composition on physicochemical properties of water dispersible granules obtained through direct granulation of agrochemical suspension using fluidized bed.

ABSTRACT: A water dispersible granule (WDG) was prepared through direct granulation of an agrochemical suspension composed of a mixture of sodium lignosulphonate and polyvinyl alcohol (PVA) as a binder using a fluidized bed granulator. The evaluation of various physicochemical properties showed that the mass median diameter (MMD) and disintegration time of the WDG increased with an increase in the PVA content. It was also revealed that the MMD was positively correlated with the viscosity of the agrochemical suspension and that the disintegration time decreased with an increase in solubility of the binder mixture.

SUBMITTER: Yanagisawa K

PROVIDER: S-EPMC6173215 | biostudies-literature | 2017 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Effect of binder composition on physicochemical properties of water dispersible granules obtained through direct granulation of agrochemical suspension using fluidized bed.

Yanagisawa Kazuyuki K Muroi Takanori T Ohtsubo Toshiro T Watano Satoru S

Journal of pesticide science 20170801 3

A water dispersible granule (WDG) was prepared through direct granulation of an agrochemical suspension composed of a mixture of sodium lignosulphonate and polyvinyl alcohol (PVA) as a binder using a fluidized bed granulator. The evaluation of various physicochemical properties showed that the mass median diameter (MMD) and disintegration time of the WDG increased with an increase in the PVA content. It was also revealed that the MMD was positively correlated with the viscosity of the agrochemic ...[more]

PMID: 30363405

Similar Datasets

A two-step approach for fluidized bed granulation in pharmaceutical processing: Assessing different models for design and control.

Project description:Various modeling techniques were used to understand fluidized bed granulation using a two-step approach. First, Plackett-Burman design (PBD) was used to identify the high-risk factors. Then, Box-Behnken design (BBD) was used to analyze and optimize those high-risk factors. The relationship between the high-risk input variables (inlet air temperature X1, binder solution rate X3, and binder-to-powder ratio X5) and quality attributes (flowability Y1, temperature Y2, moisture content Y3, aggregation index Y4, and compactability Y5) of the process was investigated using response surface model (RSM), partial least squares method (PLS) and artificial neural network of multilayer perceptron (MLP). The morphological study of the granules was also investigated using a scanning electron microscope. The results showed that X1, X3, and X5 significantly affected the properties of granule. The RSM, PLS and MLP models were found to be useful statistical analysis tools for a better mechanistic understanding of granulation. The statistical analysis results showed that the RSM model had a better ability to fit the quality attributes of granules compared to the PLS and MLP models. Understanding the effect of process parameters on granule properties provides the basis for modulating the granulation parameters and optimizing the product performance at the early development stage of pharmaceutical products.

| S-EPMC5491152 | biostudies-literature

A New Fluidized Bed Bioreactor Based on Diversion-Type Microcapsule Suspension for Bioartificial Liver Systems.

Project description:A fluidized bed bioreactor containing encapsulated hepatocytes may be a valuable alternative to a hollow fiber bioreactor for achieving the improved mass transfer and scale-up potential necessary for clinical use. However, a conventional fluidized bed bioreactor (FBB) operating under high perfusion velocity is incapable of providing the desired performance due to the resulting damage to cell-containing microcapsules and large void volume. In this study, we developed a novel diversion-type microcapsule-suspension fluidized bed bioreactor (DMFBB). The void volume in the bioreactor and stability of alginate/chitosan microcapsules were investigated under different flow rates. Cell viability, synthesis and metabolism functions, and expression of metabolizing enzymes at transcriptional levels in an encapsulated hepatocyte line (C3A cells) were determined. The void volume was significantly less in the novel bioreactor than in the conventional FBB. In addition, the microcapsules were less damaged in the DMFBB during the fluidization process as reflected by the results for microcapsule retention rates, swelling, and breakage. Encapsulated C3A cells exhibited greater viability and CYP1A2 and CYP3A4 activity in the DMFBB than in the FBB, although the increases in albumin and urea synthesis were less prominent. The transcription levels of several CYP450-related genes and an albumin-related gene were dramatically greater in cells in the DMFBB than in those in the FBB. Taken together, our results suggest that the DMFBB is a promising alternative for the design of a bioartificial liver system based on a fluidized bed bioreactor with encapsulated hepatocytes for treating patients with acute hepatic failure or other severe liver diseases.

| S-EPMC4739599 | biostudies-literature

Fluidized-Bed Granulation of Probiotics-Encapsulated Spray-Dried Skim Milk Powder: Effects of a Fluidizing Aid, Moisture-Activation and Dehydration.

Project description:A probiotic powder of poor flowability with high dust content, prepared by spray drying reconstituted skim milk fermented with Lactobacillus rhamnosus GG (LGG), was granulated by fluidized-bed granulation (FBG). The effects of the addition of skim milk powder (SMP) as a fluidizing aid, and of simple moisture-activation with or without dehydration, were investigated with respect to the performance of the FBG process. A fine, poorly fluidizable LGG powder (Geldart Group C) could be fluidized and granulated, with a 4- to 5-fold increase in particle size (d4,3 = 96-141 μm), by mixing with SMP (30-50%), which has larger, fluidizable particles belonging to Geldart Group A. Moisture-activation after the mixing, followed by fluidized-bed dehydration with hot air to remove excess moisture, further improved the FBG; the yield of the granules increased from 42% to 61% and the particle size distribution became much narrower, although the average particle size remained almost the same (d4,3 = 142 μm). These granules showed a popcorn-type structure in scanning electron microscopy images and encapsulated a sufficient level of viable LGG cells (1.6 × 108 CFU g-1). These granules also exhibited much better flowability and dispersibility than the spray-dried LGG powder.

| S-EPMC8304935 | biostudies-literature

fluidized bed organisms

Project description:microorganisms obtained from fungal fluidized bed reactor Genome sequencing and assembly

| PRJNA574236 | ENA

Calcination of Clay Raw Materials in a Fluidized Bed.

Project description:Clay raw materials are diverse in terms of their mineral composition, as well as the content of colouring oxides and their physical properties. Determining the suitability of raw materials for various purposes requires comprehensive studies on their properties, as well as their appropriate correction, which is possible through the use of appropriate modification techniques. One of the most commonly used technologies for the enrichment of clay raw materials is to subject them to high temperatures, which, depending on the temperature regime used in the technological process, may cause the decomposition and removal of some addditional components (e.g., carbonates), as well as the removal of water and dehydroxylation of clay minerals, reversible structural changes, and the complete and permanent reconstruction of the mineral phases. This paper presents a new application for fluidization technology in the calcination of clay raw materials. The results of the experiment show that the fluidization method is competitive compared to the technologies that have been used so far, as a result of, inter alia, the much shorter time period required to carry out the calcination process and, consequently, the much lower energy expenditure, the high efficiency of burning coal, and the lower CO2 emissions resulting from the mixing taking place in the reactor.

| S-EPMC8303566 | biostudies-literature

Antioxidant Activity of the Lignins Derived from Fluidized-Bed Fast Pyrolysis.

Project description:A challenge in recent years has been the rational use of forest and agriculture residues for the production of bio-fuel, biochemical, and other bioproducts. In this study, potentially useful compounds from pyrolytic lignins were identified by HPLC-MS/MS and untargeted metabolomics. The metabolites identified were 2-(4-allyl-2-methoxyphenoxy)-1-(4-hydroxy-3-methoxyphenyl)-1-propanol, benzyl benzoate, fisetinidol, phenyllactic acid, 2-phenylpropionic acid, 6,3'-dimethoxyflavone, and vanillin. The 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (DPPH), trolox equivalent antioxidant capacity (TEAC), and total phenolics content (TPC) per gram of pyrolytic lignin ranged from 14 to 503 mg ascorbic acid equivalents, 35 to 277 mg trolox equivalents, and 0.42 to 50 mg gallic acid equivalents, respectively. A very significant correlation was observed between the DPPH and TPC (r = 0.8663, p ? 0.0001), TEAC and TPC (r = 0.8044, p ? 0.0001), and DPPH and TEAC (r = 0.8851, p ? 0.0001). The polyphenolic compounds in the pyrolytic lignins which are responsible for radical scavenging activity and antioxidant properties can be readily profiled with HPLC-MS/MS combined with untargeted metabolomics. The results also suggest that DPPH, TEAC, and TPC assays are suitable methods for the measurement of antioxidant activity in a variety of pyrolytic lignins. These data show that the pyrolytic lignins can be considered as promising sources of natural antioxidants and value-added chemicals.

| S-EPMC6155384 | biostudies-literature

Effect of bed characters on the direct synthesis of dimethyldichlorosilane in fluidized bed reactor.

Project description:This paper presents the numerical investigation of the effects of the general bed characteristics such as superficial gas velocities, bed temperature, bed heights and particle size, on the direct synthesis in a 3D fluidized bed reactor. A 3D model for the gas flow, heat transfer, and mass transfer was coupled to the direct synthesis reaction mechanism verified in the literature. The model was verified by comparing the simulated reaction rate and dimethyldichlorosilane (M2) selectivity with the experimental data in the open literature and real production data. Computed results indicate that superficial gas velocities, bed temperature, bed heights, and particle size have vital effect on the reaction rates and/or M2 selectivity.

| S-EPMC4649753 | biostudies-other

Integrated Purification and Formulation of an Active Pharmaceutical Ingredient via Agitated Bed Crystallization and Fluidized Bed Processing.

Project description:Integrated API and drug product processing enable molecules with high clinical efficacy but poor physicochemical characteristics to be commercialized by direct co-processing with excipients to produce advanced multicomponent intermediates. Furthermore, developing isolation-free frameworks would enable end-to-end continuous processing of drugs. The aim of this work was to purify a model API (sodium ibuprofen) and impurity (ibuprofen ethyl ester) system and then directly process it into a solid-state formulation without isolating a solid API phase. Confined agitated bed crystallization is proposed to purify a liquid stream of impure API from 4% to 0.2% w/w impurity content through periodic or parallelized operations. This stream is combined with a polymer solution in an intermediary tank, enabling the API to be spray coated directly onto microcrystalline cellulose beads. The spray coating process was developed using a Design of Experiments approach, allowing control over the drug loading efficiency and the crystallinity of the API on the beads by altering the process parameters. The DoE study indicated that the solvent volume was the dominant factor controlling the drug loading efficiency, while a combination of factors influenced the crystallinity. The products from the fluidized bed are ideal for processing into final drug products and can subsequently be coated to control drug release.

| S-EPMC9145956 | biostudies-literature

Spout Fluidized Bed Assisted Preparation of Poly(tannic acid)-Coated Urea Fertilizer.

Project description:Slow-release fertilizers (SRFs) have been widely used to reduce environment pollution derived from excessive nutrients. Coated fertilizers have been designed and prepared using various materials. However, development of new green coating materials and simple process is still a huge challenge. In this study, tannic acid (TA), a natural polyphenol, was used to prepare poly(tannic acid) (PTA)-coated fertilizers with urea prills as the core, and the technology of the coating process in a spout fluidized bed was developed. PTA coating could be formed rapidly by the fast oxidation of TA by an oxidation solution containing CuSO4 and H2O2. The coated urea release behavior was systematically studied in water and soil. In both water and soil, the release rate of nitrogen from coated urea is much slower than that from raw urea. Raw urea was completely dissolved within 30 min, while 27% of urea was released from coated urea. The pot experiments indicated that coated urea has a positive effect on the plant growth as well. Our results provide an effective method to prepare environment-friendly SRFs, indicating a promising application in sustainable agriculture.

| S-EPMC6977027 | biostudies-literature

Fluidized-Bed-Roasted Cocoa Has Different Chemical Characteristics than Conventionally Roasted Cocoa.

Project description:The roasting process can modulate sensory and physicochemical characteristics of cocoa. This study compared the chemical characteristics of cocoa nibs roasted by a convective oven [slow roasting─(SR)] vs cocoa nibs roasted in a fluidized bed roaster [fast roasting─(FR)] at two temperatures (120 and 140 °C). The contents of sugars, free amino acids (FAAs), polyphenols, acrylamide, 5-hydroxymethylfurfural, and melanoidins were monitored. Roasting reduced fructose, glucose, and sucrose contents by 95, 70, and 55%, respectively. The concentration of total FAAs was reduced up to 40% at 140 °C. The FAA profile revealed that FR favored the reactivity of some amino acids (Leu, Lys, Phe, and Val) relevant in the formation of aroma compounds and melanoidins. FR resulted in the generation of more intense brown melanoidins, a significant increase in catechin content, a higher formation of acrylamide, and a lower formation of 5-hydroxymethylfurfural in cocoa compared to SR.

| S-EPMC10326883 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data