Dataset Information

Surface roughness implant-retained mandibular bar and ball joint overdentures and adherence of microorganisms.

ABSTRACT: Objective:The aim of this study is to assess the surface roughness of the implant-retained mandibular bar overdenture (BOD) and the implant-retained mandibular ball joint overdenture (BJOD) in jaw and its relation with the adhesion of molds and yeasts and mesophyll aerobe, in time 30 and 180 days in mouth. Materials and Methods:Five-systems titanium bar CARES® and synOcta® Straumann® Dental Implant System, Holding AG Inc., Basel, Switzerland (BOD), and five-systems joint ball Klockner® Implant System; Soadco Inc., Escaldes-Engordany; Andorra (BJOD), were used in two parallel groups of five participants, in an essay to simple blind person. To 30 and 180 days, the overdentures were withdrawn and evaluated the Ra: ?m. SJ-301® Mitutoyo Corporation Inc., Kanagawa, Japan, and the adhesion of microorganisms (colony-forming unit/ml). Results:The results were as follows: the R a: Um (30th and 180th): BOD, 0.965-1.351; BJOD, 1.325-2.384. Adhesion: Molds and yeasts, BOD, 2.6 × 102 and 4.6 × 103; BJOD, 3.0 × 102 and 5.3 × 104. Adhesion: Mesophyll aerobe, BOD, 3.8 × 106 and 5.8 × 106; BJOD, 4.3 × 106 and 7.1 × 107. Conclusions:At 30 days (P = 0.489), there were no differences in BOD and BJOD for adhesion of molds and yeasts and mesophyll aerobe between both overdentures. At 180 days (P = 0.723), there were differences in the adhesion of mold and yeast and mesophyll aerobe, being greater in BJOD.

SUBMITTER: Rocio V

PROVIDER: S-EPMC6178668 | biostudies-literature | 2018 Oct-Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Surface roughness implant-retained mandibular bar and ball joint overdentures and adherence of microorganisms.

Rocío Valenzuela V Valenzuela Daniel D

European journal of dentistry 20181001 4

<h4>Objective</h4>The aim of this study is to assess the surface roughness of the implant-retained mandibular bar overdenture (BOD) and the implant-retained mandibular ball joint overdenture (BJOD) in jaw and its relation with the adhesion of molds and yeasts and mesophyll aerobe, in time 30 and 180 days in mouth.<h4>Materials and methods</h4>Five-systems titanium bar CARES<sup>®</sup> and synOcta<sup>®</sup> Straumann<sup>®</sup> Dental Implant System, Holding AG Inc., Basel, Switzerland (BOD), ...[more]

PMID: 30369801

Similar Datasets

Project description:AimTo evaluate the influence of primary insertion torque (IT) values of narrow dental implants on the peri-implant health, implant stability, immunoinflammatory responses, bone loss, and success and survival rates.MethodsThirty-one edentulous patients received two narrow implants (2.9x10mm, Facility NeoPoros) to retain mandibular overdentures. The implants were categorized in four groups according to their IT: (G1) IT > 10 Ncm; (G2) IT ≥ 10Ncm and ≤ 30 Ncm; (G3) IT >30Ncm and < 45Ncm; (G4) IT ≥ 45Ncm, and all implants were loaded after 3 months of healing. The following clinical outcomes were evaluated 1, 3, 6, and 12 months after implant insertion: (i) peri-implant tissue health (PH), gingival index (GI), plaque index (PI), calculus presence (CP), probing depth (PD), and bleeding on probing (BOP); (ii) implant stability quotient (ISQ) by resonance frequency analysis; and (iii) IL-1β and TNF-α concentration in the peri-implant crevicular fluid. The marginal bone level (MBL) and changes (MBC) were evaluated. The Chi2 test, Kruskal-Wallis test, mixed-effects regression analysis, and the Kendall rank correlation coefficient were used for statistical analysis (α = 5%).ResultsG1 presented the highest PD at all evaluated periods. G2 presented higher PI at month 6 and 12. G4 showed increased GI at month 3 and 12 and more CP at month 1 (p=.003). G2 and G4 had higher ISQ values over the study period, while those from G1 and G3 presented lower ISQ values. The IL-1β concentration increased until month 12 and was independent of IT and bone type; G4 had a higher IL-1β concentration in month 3 than the other groups (p=.015). The TNF-α release was negatively correlated with IT, and TNF-α release was highest in G1 at month 12. The MBL immediately after surgery and the MBC at month 12 were similar between the groups, and G4 presented a positive MBC at month 12. The survival and success rates were 75% for G1, 81.3% for G2, 64.3% for G3, and 95% for G4.ConclusionThe IT did not influence the clinical outcomes and the peri-implant immunoinflammatory responses and was weakly correlated with the narrow dental implants primary stability. The observed success rates suggest that the ideal IT for atrophic fully edentulous patients may deviate from the standardized IT of 32 Ncm.

Project description:Implant-retained custom-milled framework enhances the stability of palatal obturator prostheses. Therefore, to evaluate the mechanical response of implant-retained obturator prostheses with bar-clip attachment and milled bars, in three different materials under two load incidences were simulated. A maxilla model which Type IIb maxillary defect received five external hexagon implants (4.1 x 10 mm). An implant-supported palatal obturator prosthesis was simulated in three different materials: polyetheretherketone (PEEK), titanium (Ti:90%, Al:6%, V:4%) and Co-Cr (Co:60.6%, Cr:31.5%, Mo:6%) alloys. The model was imported into the analysis software and divided into a mesh composed of nodes and tetrahedral elements. Each material was assumed isotropic, elastic and homogeneous and all contacts were considered ideal. The bone was fixed and the load was applied in two different regions for each material: at the palatal face (cingulum area) of the central incisors (100 N magnitude at 45°); and at the occlusal surface of the first left molar (150 N magnitude normal to the surface). The microstrain and von-Mises stress were selected as criteria for analysis. The posterior load showed a higher strain concentration in the posterior peri-implant tissue, near the load application side for cortical and cancellous bone, regardless the simulated material. The anterior load showed a lower strain concentration with reduced magnitude and more implants involving in the load dissipation. The stress peak was calculated during posterior loading, which 77.7 MPa in the prosthetic screws and 2,686 ?? microstrain in the cortical bone. For bone tissue and bar, the material stiffness was inversely proportional to the calculated microstrain and stress. However, for the prosthetic screws and implants the PEEK showed higher stress concentration than the other materials. PEEK showed a promising behavior for the bone tissue and for the integrity of the bar and bar-clip attachments. However, the stress concentration in the prosthetic screws may represent an increase in failure risk. The use of Co-Cr alloy can reduce the stress in the prosthetic screw; however, it increases the bone strain; while the Titanium showed an intermediate behavior.

Project description:BACKGROUND:Overdentures retained by a single implant in the midline have arisen as a minimal implant treatment for edentulous mandibles. The success of this treatment depends on the performance of a single stud attachment that is susceptible to wear-related retention loss. Recently developed biomaterials used in attachments may result in better performance of the overdentures, offering minimal retention loss and greater patient satisfaction. These biomaterials include resistant polymeric matrixes and amorphous diamond-like carbon applied on metallic components. The objective of this explanatory mixed-methods study is to compare Novaloc, a novel attachment system with such characteristics, to a traditional alternative for single implants in the mandible of edentate elderly patients. METHODS/DESIGN:We will carry out a randomized cross-over clinical trial comparing Novaloc attachments to Locators for single-implant mandibular overdentures in edentate elderly individuals. Participants will be followed for three months with each attachment type; patient-based, clinical, and economic outcomes will be gathered. A sample of 26 participants is estimated to be required to detect clinically relevant differences in terms of the primary outcome (patient ratings of general satisfaction). Participants will choose which attachment they wish to keep, then be interviewed about their experiences and preferences with a single implant prosthesis and with the two attachments. Data from the quantitative and qualitative assessments will be integrated through a mixed-methods explanatory strategy. A last quantitative assessment will take place after 12 months with the preferred attachment; this latter assessment will enable measurement of the attachments' long-term wear and maintenance requirements. DISCUSSION:Our results will lead to evidence-based recommendations regarding these systems, guiding providers and patients when making decisions on which attachment systems and implant numbers will be most appropriate for individual cases. The recommendation of a specific attachment for elderly edentulous patients may combine positive outcomes from patient perspectives with low cost, good maintenance, and minimal invasiveness. TRIAL REGISTRATION:ClinicalTrials.gov, NCT03126942 . Registered on 13 April 2017.

Project description:AimThe aim of this study was to examine systematically the data published on the cost and cost-effectiveness of mandibular two-implant-retained overdentures compared to other removable prosthodontic treatment options for edentulous mandible.Settings and designIt is a systematic review which analyses the available data from the prospective and retrospective studies and randomized clinical trials to find out costs and cost effectiveness of different removable treatment modalities for completely edentulous mandible. The study protocol was decided according to PRISMA guidelines.Materials and methodsThe search was limited to English literature only and included an electronic search through PubMed Central, Cochrane Central Register of Controlled Trials, and complemented by hand-searching. All clinical trials published up to August 2019 were included (without any starting limit). Two independent investigators extracted the data and assessed the studies.Statistical analysis usedNo meta-analysis was conducted because of the high heterogeneity of data.ResultsOut of the initial 509 records, only nine studies were included. The risks of bias of individual studies were assessed. Six studies presented data on cost and cost analysis only. The rest three articles provided data on cost-effectiveness. The overall costs of implant overdentures were higher than the conventional complete dentures. However, implant overdentures were more cost-effective when compared to conventional complete dentures. Single-implant overdentures are also less expensive than two-implant overdentures. Overdentures supported by two or four mini-implants were also reported as more cost-effective than conventional two-implant-supported overdentures.ConclusionsTwo-implant-retained overdentures are more expensive but cost-effective than the conventional complete dentures. Two- or four-mini-implant-retained overdentures are less expensive than two-implant-retained overdentures, but there is a lack of long-term data on aftercare cost and survival rate of mini-implants. Single-implant overdentures are also less expensive than the two-implant-retained overdentures. The differences of the aftercare costs of different attachment systems for implant overdentures were not significant. There is a need of further studies on comparative cost-effectiveness of different types of implant overdentures.

Dataset Information

Surface roughness implant-retained mandibular bar and ball joint overdentures and adherence of microorganisms.

Publications

Surface roughness implant-retained mandibular bar and ball joint overdentures and adherence of microorganisms.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets