Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Narrow bandgap oxide nanoparticles coupled with graphene for high performance mid-infrared photodetection.

ABSTRACT: The pursuit of optoelectronic devices operating in the mid-infrared regime is driven by both fundamental interests and envisioned applications ranging from imaging, sensing to communications. Despite continued achievements in traditional semiconductors, notorious obstacles such as the complicated growth processes and cryogenic operation preclude the usage of infrared detectors. As an alternative path towards high-performance photodetectors, hybrid semiconductor/graphene structures have been intensively explored. However, the operation bandwidth of such photodetectors has been limited to visible and near-infrared regimes. Here we demonstrate a mid-infrared hybrid photodetector enabled by coupling graphene with a narrow bandgap semiconductor, Ti₂O₃ (E_g?=?0.09 eV), which achieves a high responsivity of 300?A?W^-1 in a broadband wavelength range up to 10?µm. The obtained responsivity is about two orders of magnitude higher than that of the commercial mid-infrared photodetectors. Our work opens a route towards achieving high-performance optoelectronics operating in the mid-infrared regime.

SUBMITTER: Yu X

PROVIDER: S-EPMC6191432 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Waveguide-integrated mid-infrared photodetection using graphene on a scalable chalcogenide glass platform.

Project description:The development of compact and fieldable mid-infrared (mid-IR) spectroscopy devices represents a critical challenge for distributed sensing with applications from gas leak detection to environmental monitoring. Recent work has focused on mid-IR photonic integrated circuit (PIC) sensing platforms and waveguide-integrated mid-IR light sources and detectors based on semiconductors such as PbTe, black phosphorus and tellurene. However, material bandgaps and reliance on SiO2 substrates limit operation to wavelengths λ ≲ 4 μm. Here we overcome these challenges with a chalcogenide glass-on-CaF2 PIC architecture incorporating split-gate photothermoelectric graphene photodetectors. Our design extends operation to λ = 5.2 μm with a Johnson noise-limited noise-equivalent power of 1.1 nW/Hz1/2, no fall-off in photoresponse up to f = 1 MHz, and a predicted 3-dB bandwidth of f3dB > 1 GHz. This mid-IR PIC platform readily extends to longer wavelengths and opens the door to applications from distributed gas sensing and portable dual comb spectroscopy to weather-resilient free space optical communications.

| S-EPMC9262905 | biostudies-literature

Low-Noise Mid-Infrared Photodetection in BP/h-BN/Graphene van der Waals Heterojunctions.

Project description:We present a low-noise photodetector based on van der Waals stacked black phosphorus (BP)/boron nitride (h-BN)/graphene tunneling junctions. h-BN acts as a tunneling barrier that significantly blocks dark current fluctuations induced by shallow trap centers in BP. The device provides a high photodetection performance at mid-infrared (mid-IR) wavelengths. While it was found that the photoresponsivity is similar to that in a BP photo-transistor, the noise equivalent power and thus the specific detectivity are nearly two orders of magnitude better. These exemplify an attractive platform for practical applications of long wavelength photodetection, as well as provide a new strategy for controlling flicker noise.

| S-EPMC6720574 | biostudies-literature

High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor.

Project description:Tandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm-2. With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

| S-EPMC7794321 | biostudies-literature

Plasmonic antenna coupling to hyperbolic phonon-polaritons for sensitive and fast mid-infrared photodetection with graphene.

Project description:Integrating and manipulating the nano-optoelectronic properties of Van der Waals heterostructures can enable unprecedented platforms for photodetection and sensing. The main challenge of infrared photodetectors is to funnel the light into a small nanoscale active area and efficiently convert it into an electrical signal. Here, we overcome all of those challenges in one device, by efficient coupling of a plasmonic antenna to hyperbolic phonon-polaritons in hexagonal-BN to highly concentrate mid-infrared light into a graphene pn-junction. We balance the interplay of the absorption, electrical and thermal conductivity of graphene via the device geometry. This approach yields remarkable device performance featuring room temperature high sensitivity (NEP of 82 pW[Formula: see text]) and fast rise time of 17 nanoseconds (setup-limited), among others, hence achieving a combination currently not present in the state-of-the-art graphene and commercial mid-infrared detectors. We also develop a multiphysics model that shows very good quantitative agreement with our experimental results and reveals the different contributions to our photoresponse, thus paving the way for further improvement of these types of photodetectors even beyond mid-infrared range.

| S-EPMC7519130 | biostudies-literature

Direct observation of narrow mid-infrared plasmon linewidths of single metal oxide nanocrystals.

Project description:Infrared-responsive doped metal oxide nanocrystals are an emerging class of plasmonic materials whose localized surface plasmon resonances (LSPR) can be resonant with molecular vibrations. This presents a distinctive opportunity to manipulate light-matter interactions to redirect chemical or spectroscopic outcomes through the strong local electric fields they generate. Here we report a technique for measuring single nanocrystal absorption spectra of doped metal oxide nanocrystals, revealing significant spectral inhomogeneity in their mid-infrared LSPRs. Our analysis suggests dopant incorporation is heterogeneous beyond expectation based on a statistical distribution of dopants. The broad ensemble linewidths typically observed in these materials result primarily from sample heterogeneity and not from strong electronic damping associated with lossy plasmonic materials. In fact, single nanocrystal spectra reveal linewidths as narrow as 600?cm(-1) in aluminium-doped zinc oxide, a value less than half the ensemble linewidth and markedly less than homogeneous linewidths of gold nanospheres.

| S-EPMC4869256 | biostudies-literature

Lead-Free Perovskite Narrow-Bandgap Oxide Semiconductors of Rare-Earth Manganates.

Project description:Tremendous success has been achieved in photovoltaic (PV) applications, but PV-generated electricity still cannot compete with traditional power in terms of price. Chemically stable and nontoxic all-oxide solar cells made from earth-abundant resources fulfill the requirements for low-cost manufacturing under ambient conditions and thus are promising as the next-generation approach to solar cells. However, the main obstacles to developing all-oxide solar cells are the spectral absorbers. Besides photovoltaics, novel chemically stable, nontoxic, and earth-abundant narrow-bandgap semiconductors are desired for photochemical applications in photodetectors, photoelectrodes, or photocatalysts. Herein, were report novel lead-free perovskite narrow-bandgap rare-earth semiconductors, YMnO3, HoMnO3, ErMnO3, and YbMnO3, which were identified by screening a family of perovskite rare-earth manganates, RMnO3 (R = Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, and Yb). The sharp edge observed in their absorption spectra indicates the existence of band gaps, further confirmed with laser Raman fluorescence spectra. Good periodic on-off photoelectronic response was observed in 8 of the 12 members (i.e., R = La, Pr, Nd, Sm, Gd, Tb, Dy, and Yb). Among them, YbMnO3 is approved as an n-type semiconductor with a direct band gap near 1.35 eV, whose theoretical Shockley-Queisser efficiency is approximately 33.7% for single-p-n-junction solar cells. This work sheds light on exploring stable oxide semiconductors with a narrow band gap for future applications.

| S-EPMC7178806 | biostudies-literature

Use of metamodels for rapid discovery of narrow bandgap oxide photocatalysts.

Project description:New photocatalysts are traditionally identified through trial-and-error methods. Machine learning has shown considerable promise for improving the efficiency of photocatalyst discovery from a large potential pool. Here, we describe a multi-step, target-driven consensus method using a stacking meta-learning algorithm that robustly predicts bandgaps and H2 evolution activities of photocatalysts. Trained on small datasets, these models can rapidly screen a large space (>10 million materials) to identify promising, non-toxic compounds as candidate water splitting photocatalysts. Two effective compounds and two controls possessing optimal bandgap values (∼2 eV) but not photoactivity as predicted by the models were synthesized. Their experimentally measured bandgaps and H2 evolution activities were consistent with the predictions. Conspicuously, the two compounds with strong photoactivities under UV and visible light are promising visible-light-driven water splitting photocatalysts. This study demonstrates the power of machine learning and the potential of big data to accelerate discovery of next-generation photocatalysts.

| S-EPMC8455646 | biostudies-literature

Highly Efficient Infrared Photodetection in a Gate-Controllable Van der Waals Heterojunction with Staggered Bandgap Alignment.

Project description:In recent years, various van der Waals (vdW) materials have been used in implementing high-performance photodetectors with high photoresponsivity over a wide detection range. However, in most studies reported so far, photodetection in the infrared (IR) region has not been achieved successfully. Although several vdW materials with narrow bandgaps have been proposed for IR detection, the devices based on these materials exhibit notably low photoresponsivity under IR light illumination. Here, highly efficient near-infrared (NIR) photodetection based on the interlayer optical transition phenomenon in a vdW heterojunction structure consisting of ReS2 and ReSe2 is demonstrated. In addition, by applying the gate-control function to the two-terminal vdW heterojunction photodetector, the photoresponsivity is enhanced to 3.64 × 105 A W-1 at ? = 980 nm and 1.58 × 105 A W-1 at ? = 1310 nm. Compared to the values reported for previous vdW photodetectors, these results are the highest levels of photoresponsivity in the NIR range. The study offers a novel device platform for achieving high-performance IR photodetectors.

| S-EPMC5908375 | biostudies-literature

Closing the bandgap for III-V nitrides toward mid-infrared and THz applications.

Project description:A theoretical study of InNBi alloy by using density functional theory is presented. The results show non-linear dependence of the lattice parameters and bulk modulus on Bi composition. The formation energy and thermodynamic stability analysis indicate that the InNBi alloy possesses a stable phase over a wide range of intermediate compositions at a normal growth temperature. The bandgap of InNBi alloy in Wurtzite (WZ) phase closes for Bi composition higher than 1.5625% while that in zinc-blende (ZB) phase decreases significantly at around 356 meV/%Bi. The Bi centered ZB InNBi alloy presents a change from a direct bandgap to an indirect bandgap up to 1.5625% Bi and then an oscillates between indirect bandgap and semi-metallic for 1.5625% to 25% Bi and finally to metallic for higher Bi compositions. For the same Bi composition, its presence in cluster or uniform distribution has a salient effect on band structures and can convert between direct and indirect bandgap or open the bandgap from the metallic gap. These interesting electronic properties enable III-nitride closing the bandgap and make this material a good candidate for future photonic device applications in the mid-infrared to THz energy regime.

| S-EPMC5587590 | biostudies-literature

Terahertz and mid-infrared reflectance of epitaxial graphene.

Project description:Graphene has emerged as a promising material for infrared (IR) photodetectors and plasmonics. In this context, wafer scale epitaxial graphene on SiC is of great interest in a variety of applications in optics and nanoelectronics. Here we present IR reflectance spectroscopy of graphene grown epitaxially on the C-face of 6H-SiC over a broad optical range, from terahertz (THz) to mid-infrared (MIR). Contrary to the transmittance, reflectance measurements are not hampered by the transmission window of the substrate, and in particular by the SiC Reststrahlen band in the MIR. This allows us to present IR reflectance data exhibiting a continuous evolution from the regime of intraband to interband charge carrier transitions. A consistent and simultaneous analysis of the contributions from both transitions to the optical response yields precise information on the carrier dynamics and the number of layers. The properties of the graphene layers derived from IR reflection spectroscopy are corroborated by other techniques (micro-Raman and X-ray photoelectron spectroscopies, transport measurements). Moreover, we also present MIR microscopy mapping, showing that spatially-resolved information can be gathered, giving indications on the sample homogeneity. Our work paves the way for a still scarcely explored field of epitaxial graphene-based THz and MIR optical devices.

| S-EPMC4840310 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data