Dataset Information

Adsorption of Malathion onto Copper and Iron Surfaces Relevant to Water Infrastructure.

ABSTRACT: This study investigated the adsorption of malathion to copper and iron surfaces including microspheres and pipe specimens similar to those in drinking water infrastructure. The solid phase concentration of malathion on the virgin and used copper pipe specimens was generally between 0.2 - 1 mg/g. The adsorption capacity for copper and iron microspheres were greater than those of the pipe specimens because of their higher surface area-to-volume ratios. Copper materials adsorbed more malathion than comparable iron materials. XPS analysis of copper and iron surfaces revealed peaks at 164 eV (S 2p) and 135 eV (P 2p), which suggests that malathion chemically bonded to the surfaces of the specimens. Metal oxides likely formed stable bonds with phosphorus through pi conjugation. These findings are the first to show that malathion can chemically adhere to copper and iron pipe materials. This insight is critical for understanding the decontamination strategies needed for water networks.

SUBMITTER: Harper WF

PROVIDER: S-EPMC6198671 | biostudies-literature | 2017 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Adsorption of Malathion onto Copper and Iron Surfaces Relevant to Water Infrastructure.

Harper Willie F WF Flemings William W Bailey Kandace K Lee Walter W Felker Daniel D Gallardo Vicente V Magnuson Matthew M Phillips Rebecca R

Journal - American Water Works Association 20171101 11

This study investigated the adsorption of malathion to copper and iron surfaces including microspheres and pipe specimens similar to those in drinking water infrastructure. The solid phase concentration of malathion on the virgin and used copper pipe specimens was generally between 0.2 - 1 mg/g. The adsorption capacity for copper and iron microspheres were greater than those of the pipe specimens because of their higher surface area-to-volume ratios. Copper materials adsorbed more malathion than ...[more]

PMID: 30369618

Similar Datasets

Project description:Silicon (Si) is suggested to be an important/essential nutrient for bone and connective tissue health. Silicon-substituted hydroxyapatite (Si-HA) has silicate ions incorporated into its lattice structure and was developed to improve attachment to bone and increase new bone formation. Here we investigated the direct adsorption of silicate species onto an HA coated surface as a cost effective method of incorporating silicon on to HA surfaces for improved implant osseointegration, and determined changes in surface characteristics and osteoblast cell adhesion. Plasma-sprayed HA-coated stainless steel discs were incubated in silica dispersions of different concentrations (0-42 mM Si), at neutral pH for 12 h. Adsorbed Si was confirmed by XPS analysis and quantified by ICP-OES analysis following release from the HA surface. Changes in surface characteristics were determined by AFM and measurement of surface wettability. Osteoblast cell adhesion was determined by vinculin plaque staining. Maximum Si adsorption to the HA coated disc occurred after incubation in the 6 mM silica dispersion and decreased progressively with higher silica concentrations, while no adsorption was observed with dispersions below 6 mM Si. Comparison of the Si dispersions that produced the highest and lowest Si adsorption to the HA surface, by TEM-based analysis, revealed an abundance of small amorphous nanosilica species (NSP) of ~1.5 nm in diameter in the 6 mM Si dispersion, with much fewer and larger NSP in the 42 mM Si dispersions. 29Si-NMR confirmed that the NSPs in the 6 mM silica dispersion were polymeric and similar in composition to the larger NSPs in the 42 mM Si dispersion, suggesting that the latter were aggregates of the former. Amorphous NSP adsorbed from the 6 mM dispersion on to a HA-coated disc surface increased the surface's water contact angle by 53°, whereas that adsorbed from the 42 mM dispersion decreased the contact angle by 18°, indicating increased and decreased hydrophobicity, respectively. AFM showed an increase in surface roughness of the 6 mM Si treated surface, which correlated well with an increase in number of vinculin plaques. These findings suggest that NSP of the right size (relative to charge) adsorb readily to the HA surface, changing the surface characteristics and, thus, improving osteoblast cell adhesion. This treatment provides a simple way to modify plasma-coated HA surfaces that may enable improved osseointegration of bone implants.

Dataset Information

Adsorption of Malathion onto Copper and Iron Surfaces Relevant to Water Infrastructure.

Publications

Adsorption of Malathion onto Copper and Iron Surfaces Relevant to Water Infrastructure.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure