Toward Enhancing Wearability and Fashion of Wearable Supercapacitor with Modified Polyurethane Artificial Leather Electrolyte.
Ontology highlight
ABSTRACT:
SUBMITTER: Huang Y
PROVIDER: S-EPMC6199084 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Solid-state batteries are a promising option toward high energy and power densities due to the use of lithium (Li) metal as an anode. Among all solid electrolyte materials ranging from sulfides to oxides and oxynitrides, cubic garnet-type Li7La3Zr2O12 (LLZO) ceramic electrolytes are superior candidates because of their high ionic conductivity (10-3 to 10-4 S/cm) and good stability against Li metal. However, garnet solid electrolytes generally have poor contact with Li metal, which causes high resistance and uneven current distribution at the interface. To address this challenge, we demonstrate a strategy to engineer the garnet solid electrolyte and the Li metal interface by forming an intermediary Li-metal alloy, which changes the wettability of the garnet surface (lithiophobic to lithiophilic) and reduces the interface resistance by more than an order of magnitude: 950 ohm·cm2 for the pristine garnet/Li and 75 ohm·cm2 for the surface-engineered garnet/Li. Li7La2.75Ca0.25Zr1.75Nb0.25O12 (LLCZN) was selected as the solid-state electrolyte (SSE) in this work because of its low sintering temperature, stabilized cubic garnet phase, and high ionic conductivity. This low area-specific resistance enables a solid-state garnet SSE/Li metal configuration and promotes the development of a hybrid electrolyte system. The hybrid system uses the improved solid-state garnet SSE Li metal anode and a thin liquid electrolyte cathode interfacial layer. This work provides new ways to address the garnet SSE wetting issue against Li and get more stable cell performances based on the hybrid electrolyte system for Li-ion, Li-sulfur, and Li-oxygen batteries toward the next generation of Li metal batteries.
| S-EPMC5384807 | biostudies-literature
Project description:In order to reduce medical facility overload due to the rise of the elderly population, modern lifestyle diseases, or pandemics, the medical industry is currently developing point-of-care and home medical device systems. Diabetes is an incurable and lifetime disease, accountable for a significant mortality and socio-economic public health burden. Thus, tight glucose control in diabetic patients, which can prevent the onset of its late complications, is of enormous importance. Despite recent advances, the current best achievable management of glucose control is still inadequate, due to several key limitations in the system components, mainly related to the reliability of sensing components, both temporally and chemically, and the integration of sensing and delivery components in a single wearable platform, which is yet to be achieved. Thus, advanced closed-loop artificial pancreas systems able to modulate insulin delivery according to the measured sensor glucose levels, independently of patient supervision, represent a key requirement of development efforts. Here, we demonstrate a minimally invasive, transdermal, multiplex, and versatile continuous metabolites monitoring system in the subcutaneous interstitial fluid space based on a chemically modified SiNW-FET nanosensor array on microneedle elements. Using this technology, ISF-borne metabolites require no extraction and are measured directly and continuously by the nanosensors. Due to their chemical sensing mechanism, the nanosensor response is only influenced by the specific metabolite of interest, and no response is observed in the presence of potential exogenous and endogenous interferents known to seriously affect the response of current electrochemical glucose detection approaches. The 2D architecture of this platform, using a single SOI substrate as a top-down multipurpose material, resulted in a standard fabricated chip with 3D functionality. After proving the ability of the system to act as a selective multimetabolites sensor, we have implemented our platform to reach our main goal for in vivo continuous glucose monitoring of healthy human subjects. Furthermore, minor adjustments to the fabrication technique allow the on-chip integration of microinjection needle elements, which can ideally be used as a drug delivery system. Preliminary experiments on a mice animal model successfully demonstrated the single-chip capability to both monitor glucose levels as well as deliver insulin. By that, we hope to provide in the future a cost-effective and reliable wearable personalized clinical tool for patients and a strong tool for research, which will be able to perform direct monitoring of clinical biomarkers in the ISF as well as synchronized transdermal drug delivery by this single-chip multifunctional platform.
| S-EPMC8397432 | biostudies-literature
Project description:Expanding the range of supercapacitor operation to temperatures above 100 °C is important because this would enable capacitors to operate under the severe conditions required for next-generation energy storage devices. In this study, we address this challenge by the fabrication of a solid-state supercapacitor with a proton-conducting Sn(0.95)Al(0.05)H(0.05)P(2)O(7) (SAPO)-polytetrafluoroethylene (PTFE) composite electrolyte and a highly condensed H3PO4 electrode ionomer. At a temperature of 200 °C, the SAPO-PTFE electrolyte exhibits a high proton conductivity of 0.02 S cm(-1) and a wide withstanding voltage range of ± 2 V. The H3PO4 ionomer also has good wettability with micropore-rich activated carbon, which realizes a capacitance of 210 F g(-1) at 200 °C. The resulting supercapacitor exhibits an energy density of 32 Wh kg(-1) at 3 A g(-1) and stable cyclability after 7000 cycles from room temperature to 150 °C.
| S-EPMC4298720 | biostudies-literature
Project description:Recent improvements in colorectal cancer (CRC) incidence, mortality, stage at diagnosis, and survival in the general U.S. population have been attributed to routine screening with prompt removal of polyps, early detection, and timely and appropriate treatment. American Indians/Alaska Natives (AI/ANs) have not experienced improvements in CRC related outcomes and are significantly less likely than non-Hispanic Whites to receive recommended CRC screening. The purpose of this three-arm randomized controlled trial is to determine the efficacy of interventions designed to enhance CRC screening. The study also uses mixed methods to finalize the intervention and to determine promoters and barriers of screening. The study also conducts process evaluation to determine cost-effectiveness of the interventions, fidelity of study implementation, and to develop plans to sustain and scale-up the intervention model. The study will determine the efficacy of serially implemented interventions of graded intensity for increasing CRC screening using the fecal immunochemical test (FIT) in accordance to recommended guidelines among average risk American Indians (AIs) aged 50-75 residing on reservations in rural Southwestern U.S. Serial implementation refers to offering routine screening, irrespective of response to an earlier invitation, in concordance with guidelines which recommend annual FIT testing between ages 50-75. The FIT is most appropriate because it is an approved, high sensitivity fecal occult blood test and is available at Indian Health Service (IHS) and tribal health facilities where resources to provide screening colonoscopy are limited. The study is a collaborative effort between the Albuquerque Area Indian Health Board (100% Indian-owned and operated), six Pueblo Tribes in rural Southwestern U.S., and the University of New Mexico. Findings from this research could lead to an immediate increase in CRC screening and ultimately reduce CRC burden among AIs, thus addressing national and tribal priorities of reducing CRC disparities among AIs.
| 2223611 | ecrin-mdr-crc
Project description:High ionic conductivity and good stability are major factors that influence the use of polymer electrolytes in electrochemical storage and conversion devices. In this study, we present polyurethane acrylate (PUA) membranes having enhanced ionic conductivity and swelling stability by double crosslinking the polyurethane (PU) and polyacrylate (PA) compartments. The crosslinking agent concentration was varied to control their mechanical properties, swelling stability, and ionic conductivity. Under optimum conditions, the electrolyte uptake of the double-crosslinked PUA membranes without notable defects was 245%. The maximum ionic conductivity of these membranes reached 9.6 mS/cm, which was higher than those with respect to most of the previously reported PUA- or PU-based polymer electrolytes.
| S-EPMC7693480 | biostudies-literature
Project description:The effects of the soft block fraction and H-bond state in thermoplastic polyurethanes on autonomous entropy-driven scratch closure and barrier restoration are studied. To this aim, comparable polyurethanes with different segmentation states are applied as organic coatings on plain carbon steel plates, scratched under very well-controlled conditions, and the scratch closure and sealing kinetics are studied in detail. The scratch closure is measured optically, while the barrier restoration is probed by the accelerated cyclic electrochemical technique (ACET). Scratch closure, attributed to entropic elastic recovery (EER), is followed in a marked two-step process by barrier restoration governed by local viscous flow and the state of the interfacial hydrogen bonding. Polyurethanes with a lower soft phase fraction lead to a higher urea/urethane ratio, which in turn influences the healing efficiency of each healing step. Interestingly, softer polyurethanes leading to efficient crack closure were unable to sufficiently restore barrier properties. The present work highlights the critical role of the soft/hard block and urea/urethane H-bond state content on crack closure and barrier restoration of anticorrosive organic coatings and points at design rules for the design of more efficient corrosion-protective self-healing polyurethanes.
| S-EPMC8154210 | biostudies-literature
Project description:Functional Near-Infrared Spectroscopy (fNIRS) is a hemodynamic modality in human cognitive workload assessment receiving popularity due to its easier implementation, non-invasiveness, low cost and other benefits from the signal-processing point of view. Wearable wireless fNIRS systems used in research have promisingly shown that fNIRS could be used in cognitive workload assessment in out-of-the-lab scenarios, such as in operators' cognitive workload monitoring. In such a scenario, the wearability of the system is a significant factor affecting user comfort. In this respect, the wearability of the system can be improved if it is possible to minimize an fNIRS system without much compromise of the cognitive workload detection accuracy. In this study, cognitive workload-related hemodynamic changes were acquired using an fNIRS system covering the whole forehead, which is the region of interest in most cognitive workload-monitoring studies. A machine learning approach was applied to explore how the mean accuracy of the cognitive workload classification accuracy varied across various sensing locations on the forehead such as the Left, Mid, Right, Left-Mid, Right-Mid and Whole forehead. The statistical significance analysis result showed that the Mid location could result in significant cognitive workload classification accuracy compared to Whole forehead sensing, with a statistically insignificant difference in the mean accuracy. Thus, the wearable fNIRS system can be improved in terms of wearability by optimizing the sensor location, considering the sensing of the Mid location on the forehead for cognitive workload monitoring.
| S-EPMC7570614 | biostudies-literature
Project description:Flexible power sources with load bearing capability are attractive for modern wearable electronics. Here, free-standing supercapacitor fabrics that can store high electrical energy and sustain large mechanical loads are directly woven to be compatible with flexible systems. The prototype with reduced package weight/volume provides an impressive energy density of 2.58 mWh g-1 or 3.6 mWh cm-3, high tensile strength of over 1000?MPa, and bearable pressure of over 100?MPa. The nanoporous thread electrodes are prepared by the activation of commercial carbon fibers to have three-orders of magnitude increase in the specific surface area and 86% retention of the original strength. The novel device configuration woven by solid electrolyte-coated threads shows excellent flexibility and stability during repeated mechanical bending tests. A supercapacitor watchstrap is used to power a liquid crystal display as an example of load-bearing power sources with various form-factor designs for wearable electronics.
| S-EPMC5662724 | biostudies-literature
Project description:IntroductionThe detection and monitoring of electrolyte imbalance is essential for appropriate management of many metabolic diseases; however, there is no tool that detects such imbalances reliably and noninvasively. In this study, we developed a deep learning model (DLM) using electrocardiography (ECG) for detecting electrolyte imbalance and validated its performance in a multicenter study.Methods and resultsThis retrospective cohort study included two hospitals: 92,140 patients who underwent a laboratory electrolyte examination and an ECG within 30 min were included in this study. A DLM was developed using 83,449 ECGs of 48,356 patients; the internal validation included 12,091 ECGs of 12,091 patients. We conducted an external validation with 31,693 ECGs of 31,693 patients from another hospital, and the result was electrolyte imbalance detection. During internal, the area under the receiving operating characteristic curve (AUC) of a DLM using a 12-lead ECG for detecting hyperkalemia, hypokalemia, hypernatremia, hyponatremia, hypercalcemia, and hypocalcemia were 0.945, 0.866, 0.944, 0.885, 0.905, and 0.901, respectively. The values during external validation of the AUC of hyperkalemia, hypokalemia, hypernatremia, hyponatremia, hypercalcemia, and hypocalcemia were 0.873, 0.857, 0.839, 0.856, 0.831, and 0.813 respectively. The DLM helped to visualize the important ECG region for detecting each electrolyte imbalance, and it showed how the P wave, QRS complex, or T wave differs in importance in detecting each electrolyte imbalance.ConclusionThe proposed DLM demonstrated high performance in detecting electrolyte imbalance. These results suggest that a DLM can be used for detecting and monitoring electrolyte imbalance using ECG on a daily basis.
| S-EPMC8164149 | biostudies-literature
Project description:We have developed a proof of concept electrode design to covalently graft poly(methyl methacrylate) brushes directly to silicon thin film electrodes via surface-initiated atom transfer radical polymerization. This polymer layer acts as a stable artificial solid electrolyte interface that enables surface passivation despite large volume changes during cycling. Thin polymer layers (75?nm) improve average first cycle coulombic efficiency from 62.4% in bare silicon electrodes to 76.3%. Average first cycle reversible capacity was improved from 3157 to 3935 mAh g-1, and average irreversible capacity was reduced from 2011 to 1020 mAh g-1. Electrochemical impedance spectroscopy performed on silicon electrodes showed that resistance from solid electrolyte interface formation increased from 79 to 1508 ? in untreated silicon thin films over 26 cycles, while resistance growth was lower - from 98 to 498 ? - in silicon films functionalized with PMMA brushes. The lower increase suggests enhanced surface passivation and lower electrolyte degradation. This work provides a pathway to develop artificial solid electrolyte interfaces synthesized under controlled reaction conditions.
| S-EPMC6070503 | biostudies-literature