Dataset Information

Effect of Multiple Factors on Foam Stability in Foam Sclerotherapy.

ABSTRACT: Foam sclerotherapy is a widely used treatment for varicose veins. However, complications caused by poor foam stability still remain. Most studies ignore multiple influencing factors and only study a single factor. Furthermore, a stable foam preparation using different preparation conditions has not been developed. This study aimed to explore the changing laws of foam stability under multifactorial conditions, and to determine the influence of various factors and optimal preparation conditions on the half-life of foam. A two-level orthogonal test was conducted using four factors (syringe size, surfactant, preparation temperature, and pump speed). Classifications were established as follows: syringe sizes, 2.5?mL and 5?mL; surfactant concentrations, 6% and 0%; preparation temperatures, 20?°C and 10?°C; and pump speeds, 250?mm/s and 125?mm/s, respectively. Eight experimental group (EG) multi-factor combinations were tested. Half-life and drainage time were recorded for analysis. The initial drainage time was within 200?s, but the difference between the groups was also about 200?s. The drainage rate curves of all EGs gradually increased over time. Conversely, the foam half-life extended by about 10 times for the four factors. In addition, the analyses revealed that the order of influence was surfactant >temperature >pump speed >syringe size. The most stable foam preparation was determined. Syringe size, surfactant, temperature, and pump speed had markedly observable influences on foam half-life. A combination of multiple factors can be used to prepare a more stable foam in clinical scenarios and to suitably superimpose favorable conditions to avoid unfavorable conditions.

SUBMITTER: Bai T

PROVIDER: S-EPMC6200734 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of Multiple Factors on Foam Stability in Foam Sclerotherapy.

Bai Taoping T Jiang Wentao W Chen Yu Y Yan Fei F Xu Zhi Z Fan Yubo Y

Scientific reports 20181024 1

Foam sclerotherapy is a widely used treatment for varicose veins. However, complications caused by poor foam stability still remain. Most studies ignore multiple influencing factors and only study a single factor. Furthermore, a stable foam preparation using different preparation conditions has not been developed. This study aimed to explore the changing laws of foam stability under multifactorial conditions, and to determine the influence of various factors and optimal preparation conditions on ...[more]

PMID: 30356108

Similar Datasets

Project description:In recent years, studies conducted on foam stabilization have focused on nanoparticles by generating strong adsorption at the interface to stabilize the foam under harsh reservoir conditions. Meanwhile, the selection of a gas source is also of great importance for foam performance. In this study, a mixed system of surfactants was selected, and the foamability and foam stability of nitrogen and methane were evaluated according to the improved jet method. After adding modified SiO2 nanoparticles, the foam-related parameters were analyzed. The plugging abilities of the different foams were compared through core-flooding experiments, and the oil displacement effects of the different foams were compared through microfluidic experiments. The results show that the amphoteric surfactant betaine has an excellent synergistic effect on the anionic surfactant SDS. The methane foam produced using the jet method has a larger initial volume than the nitrogen foam, but its stability is poor. The half-life of the nitrogen foam is about two times that of the methane foam. After adding 1.0 wt % SiO2 nanoparticles to the surfactant solution, the viscosity and stability of the formed foam improve. However, the maximum viscosity of the surfactant nanoparticle foam (surfactant-NP foam) is 53 mPa·s higher than that of the surfactant foam. In the core-flooding experiment, the plugging performance of the methane foam was worse than that of the nitrogen foam, and in the microfluidic experiment, the oil displacement abilities of the methane foam and the nitrogen foam were similar. The plugging performance and the oil displacement effect of the foam are greatly improved by adding nanoparticles. The surfactant-NP foam flooding has a better oil displacement effect and can enhance the recovery factor by more than 30%. Under actual high-pressure reservoir conditions, although the stability of the methane foam is weaker than that of the nitrogen foam, some methane may be dissolved in the crude oil to decrease the viscosity after the foam collapses, which leads to the methane foam being the preferred method in oilfields.

Dataset Information

Effect of Multiple Factors on Foam Stability in Foam Sclerotherapy.

Publications

Effect of Multiple Factors on Foam Stability in Foam Sclerotherapy.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets