Dataset Information

Evolution and Disappearance of Solvent Drops on Miscible Polymer Subphases.

ABSTRACT: Traditionally, an interface is defined as a boundary between immiscible phases. However, previous work has shown that even when two fluids are completely miscible, they maintain a detectable "effective interface" for long times. Miscible interfaces have been studied in various systems of two fluids with a single boundary between them. However, this work has not extended to the three-phase system of a fluid droplet placed on top of a miscible pool. We show that these three-phase systems obey the same wetting conditions as immiscible systems, and that their drop shapes obey the Augmented Young-Laplace Equation. Over time, the miscible interface diffuses and the shape of the drop evolves. We place 2-microliter drops of water atop miscible poly(acrylamide) solutions. The drop is completely wetted by the subphase, and then remains detectable beneath the surface for many minutes. An initial effective interfacial tension can be approximated to be on the order of 0.5 mN/m using the capillary number. Water and poly(acrylamide) are completely miscible in all concentrations, and yet, when viewed from the side, the drop maintains a capillary shape. Study of this behavior is important to the understanding of effective interfaces between miscible polymer phases, which are pervasive in nature.

SUBMITTER: Stetten AZ

PROVIDER: S-EPMC6219638 | biostudies-literature | 2018 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Evolution and Disappearance of Solvent Drops on Miscible Polymer Subphases.

Stetten Amy Z AZ Treece Bradley W BW Corcoran Timothy E TE Garoff Stephen S Przybycien Todd M TM Tilton Robert D RD

Colloids and surfaces. A, Physicochemical and engineering aspects 20180302

Traditionally, an interface is defined as a boundary between immiscible phases. However, previous work has shown that even when two fluids are completely miscible, they maintain a detectable "effective interface" for long times. Miscible interfaces have been studied in various systems of two fluids with a single boundary between them. However, this work has not extended to the three-phase system of a fluid droplet placed on top of a miscible pool. We show that these three-phase systems obey the ...[more]

PMID: 30416264

Similar Datasets

Project description:Motivated by the possibility of enhancing aerosol drug delivery to mucus-obstructed lungs, the spreading of a drop of aqueous surfactant solution on a physically entangled aqueous poly(acrylamide) solution subphase that mimics lung airway surface liquid was investigated. Sodium dodecyl sulfate was used as the surfactant. To visualize spreading of the drop and mimic the inclusion of a drug substance, fluorescein, a hydrophilic and non-surface-active dye, was added to the surfactant solution. The spreading progresses through a series of events. Marangoni stresses initiate the convective spreading of the drop. Simultaneously, surfactant escapes across the drop's contact line within a second of deposition and causes a change in subphase surface tension outside the drop on the order of 1 mN/m. Convective spreading of the drop ends within 2-3 s of drop deposition, when a new interfacial tension balance is achieved. Surfactant escape depletes the drop of surfactant, and the residual drop takes the form of a static lens of nonzero contact angle. On longer time scales, the surfactant dissolves into the subphase. The lens formed by the water in the deposited drop persists for as long as 3 min after the convective spreading process ends due to the long diffusional time scales associated with the underlying entangled polymer solution. The persistence of the lens suggests that the drop phase behaves as if it were immiscible with the subphase during this time period. Whereas surfactant escapes the spreading drop and advances on the subphase/vapor interface, hydrophilic dye molecules in the drop do not escape but remain with the drop throughout the convective spreading. The quasi-immiscible nature of the spreading event suggests that the chemical properties of the surfactant and subphase are much less important than their physical properties, consistent with prior qualitative studies of spreading of different types of surfactants on entangled polymer subphases: the selection of surfactant for pulmonary delivery applications may be limited only by physical and toxicological considerations. Further, the escape of surfactant from individual drops may provide an additional spreading mechanism in the lung, as hydrodynamic and/or surface pressure repulsions may drive individual droplets apart after deposition.

Project description:Fluorescence spectroscopy was employed to characterize the kinetics of guest exchange in diblock copolymer micelles composed of poly(ethylene oxide-b-ε-caprolactone) (PEO-PCL) diblock copolymers in water/tetrahydrofuran (THF) mixtures which encapsulated fluorophores. The solvent composition (THF content) of the micelle solution was varied as a means of modulating the strength of interactions between the fluorophore and solvent as well as between the micelle core and solvent. A donor-acceptor fluorophore pair was employed consisting of 3,3'-dioctadecyloxacarbocyanine perchlorate (DiO, the donor) and 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (DiI, the acceptor). Through the process of Förster resonance energy transfer (FRET), energy was transferred from the donor to acceptor when the fluorophores were in close proximity. A micelle solution containing DiO was mixed with a micelle solution containing DiI at t = 0, and the emission spectra of the mixed solution were monitored over time (at an excitation wavelength optimized for the donor). In micelle solutions containing 5 and 10 vol% THF in the bulk solvent, an increase in the acceptor peak intensity maximum occurred over time in the post-mixed solution, accompanied by a decrease in the donor peak intensity maximum, indicating the presence of energy transfer from the donor to the acceptor. At long times, the FRET ratios (acceptor peak intensity divided by the sum of the acceptor and donor peak intensities) were indistinguishable from that determined from pre-mixed micelle solutions of the same THF content (in pre-mixed solutions, DiO and DiI were encapsulated within the same micelle cores). In the micelle solution containing 20 vol% THF, the fluorophore exchange process occurred too quickly to be observed (the FRET ratios measured from the solutions mixed at t = 0 were commensurate to that measured from the pre-mixed solution). A time constant describing the guest exchange process was extracted from the time-dependence of the FRET ratio through fit of an exponential decay. An increase in the THF content in the micelle solution resulted in a decrease in the time constant, and the time constant varied over five orders of magnitude as the THF content was varied from 5-20 vol%.

Dataset Information

Evolution and Disappearance of Solvent Drops on Miscible Polymer Subphases.

Publications

Evolution and Disappearance of Solvent Drops on Miscible Polymer Subphases.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets