Comparison of soil sorption parameters of pesticides measured by batch and centrifugation methods using an andosol.
Ontology highlight
ABSTRACT:
SUBMITTER: Motoki Y
PROVIDER: S-EPMC6240779 | biostudies-literature | 2018 Nov
REPOSITORIES: biostudies-literature
Publications
Comparison of soil sorption parameters of pesticides measured by batch and centrifugation methods using an andosol.
Motoki Yutaka Y Iwafune Takashi T Seike Nobuyasu N Inao Keiya K Namiki Sayuri S
Journal of pesticide science 20181101 4
We compared the soil sorption coefficient (<i>K</i> <sub>d</sub>) measured by batch and centrifugation methods using a Japanese andosol and ten pesticides. Although the <i>K</i> <sub>d</sub> values measured by both methods increased with time, those obtained <i>via</i> the batch method tended to be higher during the test period. The difference in <i>K</i> <sub>d</sub> values between the two methods affected pesticide concentrations estimated in the soil solution, and the results estimated using ...[more]
Similar Datasets
Project description:The objective of this study is to compare the consistency between column and batch experiment methods for measuring solid-phase sorption coefficients and isotherms for per and polyfluoroalkyl substances (PFAS). Perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) are used as representative PFAS, and experiments are conducted with three natural porous media with differing geochemical properties. Column-derived sorption isotherms are generated by conducting multiple experiments with different input concentrations (multi-C0 method) or employing elution-front integration wherein the entire isotherm is determined from a single breakthrough curve (BTC) elution front. The isotherms generated with the multi-C0 column method compared remarkably well to the batch isotherms over an aqueous concentration range of 3-4 orders of magnitude. Specifically, the 95% confidence intervals for the individual isotherm variables overlapped, producing statistically identical regressions. The elution-front integration isotherms generally agreed with the batch isotherms, but exhibited noise and systematic deviation at lower concentrations in some cases. All data sets were well described by the Freundlich isotherm model. Freundlich N values ranged from 0.75 to 0.81 for PFOS and was 0.87 for PFOA and are consistent with values reported in the literature for different geomedia. The results of this study indicate that column and batch experiments can measure consistent sorption isotherms and sorption coefficients for PFOS and PFOA when robust experimental setup and data analysis are implemented.
| S-EPMC7746577 | biostudies-literature
Project description:The sorption of Ni(II) on a calcareous aridisol (CA) soil, one of the major soil types in northwestern China, was investigated using batch and extended X-ray absorption fine structure (EXAFS) approaches in a 0.01?mol/L NaClO4 solution at different pH values (6.0-10.0), temperatures (25-60?°C) and contact times (2-15 days). Under alkaline conditions, EXAFS analysis showed that the interatomic distances between Ni and O atoms (RNi-O) were approximately 2.04?Å with a typical coordination number (CN) of ~6.0?O atoms in the contact time range from 2 to 15 days. The RNi-Ni (~3.07?Å) suggested that the structure of the Ni(II) adsorbed on the CA soil was basically the same as that of Ni(OH)2(s), while the Ni-Al shell (RNi-Al ~3.16?Å) gradually formed and grew with the increasing contact time. Under weakly acidic conditions, the sorption mechanism of Ni(II) on the CA soil possibly included at least two processes: (i) a fast accumulation dominated by ion exchange and surface complexation and (ii) the formation of a Ni-Al LDH phase over the long term. A high temperature is beneficial to the fixation of Ni(II) on the CA soil and the formation of a Ni-Al LDH.
| S-EPMC5404261 | biostudies-literature
Project description:Urban communities use hydrologic models to plan for and assess the effectiveness of stormwater control measures. Although emphasis is placed on soils as permeable surfaces that regulate the rainfall-runoff process, representative soil hydrologic parameters for urban areas are rare. The extent to which measured and commonly simulated hydrologic data may differ is also largely uncharacterized. As part of the US EPA urban soil assessment, infiltration and drainage rates were measured in 12 cities, and the authors compared these measured data to estimates generated from the EPA National Stormwater Calculator (NSWC), United States Department of Agriculture (USDA) Soil Survey Geographic Database (SSURGO), and USDA Rosetta. The analysis highlights the overall lack of soil hydrologic data for many cities in the NSWC and SSURGO and show that common prediction algorithms for infiltration and drainage poorly represent urban soil hydraulics. Paired comparison of field-measured values and model-estimated values resulted in root-mean-square errors ranging from 23 to 173 mm=h. These findings are presented in the context of planning for effective stormwater and wastewater management practices, and the need for confirming simulation results with site-specific field data.
| S-EPMC6436630 | biostudies-literature
Project description:The sorption mechanism of nickel (Ni) at the illite/water interface was investigated using batch, sorption modelling, extended X-ray absorption fine structure (EXAFS), and extraction approaches. The results showed that Ni(II) sorption on illite was strongly dependent on pH, contact time, temperature, and initial Ni(II) concentration. At a low initial Ni(II) concentration, the ion exchange species of ≡X2Ni° and the inner-sphere complexes including ≡SsONi+, ≡SwONi+ and ≡SwONiOH° species are observed on the sorption edges of Ni(II) on illite. As the initial Ni(II) concentration increased to 1.7 × 10-3 mol/L, precipitates including surface-induced precipitation of s-Ni(OH)2 and amorphous Ni(OH)2 became more significant, especially under neutral to alkaline conditions. EXAFS analysis confirmed that Ni-Al layered double hydroxide (LDH) can gradually form with an increase in the contact time. At pH 7.0, α-Ni(OH)2 was produced in the initial stage and then transformed to the more stable form of Ni-Al LDH with increasing contact time because of the increased Al3+ dissolution. With an increase in temperatures, α-Ni(OH)2 phase on illite transformed to Ni-Al LDH phase, indicating a lower thermodynamic stability compared to Ni-Al LDH phase. These results are important to understand the geochemical behaviors to effectively remediate soil contaminated with Ni(II).
| S-EPMC5561197 | biostudies-literature
Project description:BackgroundIn literature, not much emphasis has been placed on methods for analyzing repeatedly measured independent variables, even less so for the use in prediction modeling specifically. However, repeated measurements could especially be interesting for the construction of prediction models. Therefore, our objective was to evaluate different methods to model a repeatedly measured independent variable and a long-term fixed outcome variable into a prediction model.MethodsSix methods to handle a repeatedly measured predictor were applied to develop prediction models. Methods were evaluated with respect to the models' predictive quality (explained variance R 2 and the area under the curve (AUC)) and their properties were discussed. The models included overweight and BMI-standard deviation score (BMI-SDS) at age 10 years as outcome and seven BMI-SDS measurements between 0 and 5.5 years as longitudinal predictor. Methods for comparison encompassed developing models including: all measurements; a single (here: the last) measurement; a mean or maximum value of all measurements; changes between subsequent measurements; conditional measurements; and growth curve parameters.ResultsAll methods, except for using the maximum or mean, resulted in prediction models for overweight of similar predictive quality, with adjusted Nagelkerke R 2 ranging between 0.230 and 0.244 and AUC ranging between 0.799 and 0.807. Continuous BMI-SDS prediction showed similar results.ConclusionsThe choice of method depends on hypothesized predictor-outcome associations, available data, and requirements of the prediction model. Overall, the growth curve method seems to be the most flexible method capable of incorporating longitudinal predictor information without loss in predictive quality.
| S-EPMC6460730 | biostudies-literature
Project description:As the cost of single-cell RNA-seq experiments has decreased, an increasing number of datasets are now available. Combining newly generated and publicly accessible datasets is challenging due to non-biological signals, commonly known as batch effects. Although there are several computational methods available that can remove batch effects, evaluating which method performs best is not straightforward. Here, we present BatchBench (https://github.com/cellgeni/batchbench), a modular and flexible pipeline for comparing batch correction methods for single-cell RNA-seq data. We apply BatchBench to eight methods, highlighting their methodological differences and assess their performance and computational requirements through a compendium of well-studied datasets. This systematic comparison guides users in the choice of batch correction tool, and the pipeline makes it easy to evaluate other datasets.
| S-EPMC8053088 | biostudies-literature
Project description:Although a number of different methods have been used to quantify soil bacteria, identifying the optimal method(s) for soil bacterial abundance is still in question. No single method exists for undertaking an absolute microbial count using culture-dependent methods (CDMs) or even culture-independent methods (CIMs). This study investigated soil storage and pretreatment methods for optimal bacterial counts. Appropriate storage temperature (4°C) and optimal pretreatment methods (sonication time for 3 min and centrifugation at 1400 g) were necessary to preserve bacterial cell viability and eliminate interference from soil particles. To better estimate soil bacterial numbers under various cellular state and respiration, this study also evaluated three CDMs (i.e., colony forming unit, spotting, and most probable number (MPN) and three CIMs (i.e., flow cytometry (FCM), epifluorescence microscopy (EM) count, and DNA quantitation). Each counting method was tested using 72 soil samples collected from a local arable farm site at three different depths (i.e., 10-20, 90-100, and 180-190 cm). Among all CDMs, MPN was found to be rapid, simple, and reliable. However, the number of bacteria quantified by MPN was 1-2 orders lower than that quantified by CIMs, likely due to the inability of MPN to count anaerobic bacteria. The DNA quantitation method appeared to overestimate soil bacterial numbers, which may be attributed to DNA from dead bacteria and free DNA in the soil matrix. FCM was found to be ineffective in counting soil bacteria as it was difficult to separate the bacterial cells from the soil particles. Dyes used in FCM stained the bacterial DNA and clay particles. The EM count was deemed a highly effective method as it provided information on soil mineral particles, live bacteria, and dead bacteria; however, it was a time-consuming and labor-intensive process. Combining both types of methods was considered the best approach to acquire better information on the characteristics of indigenous soil microorganisms (aerobic versus anaerobic, live versus dead).
| S-EPMC7875414 | biostudies-literature
Project description:Assessment of management-induced changes in soil quality is important to sustaining high crop yield. A large diversity of cultivated soils necessitate identification development of an appropriate soil quality index (SQI) based on relative soil properties and crop yield. Whereas numerous attempts have been made to estimate SQI for major soils across the World, there is no standard method established and thus, a strong need exists for developing a user-friendly and credible SQI through comparison of various available methods. Therefore, the objective of this article is to compare three widely used methods to estimate SQI using the data collected from 72 soil samples from three on-farm study sites in Ohio. Additionally, challenge lies in establishing a correlation between crop yield versus SQI calculated either depth wise or in combination of soil layers as standard methodology is not yet available and was not given much attention to date. Predominant soils of the study included one organic (Mc), and two mineral (CrB, Ko) soils. Three methods used to estimate SQI were: (i) simple additive SQI (SQI-1), (ii) weighted additive SQI (SQI-2), and (iii) statistically modeled SQI (SQI-3) based on principal component analysis (PCA). The SQI varied between treatments and soil types and ranged between 0-0.9 (1 being the maximum SQI). In general, SQIs did not significantly differ at depths under any method suggesting that soil quality did not significantly differ for different depths at the studied sites. Additionally, data indicate that SQI-3 was most strongly correlated with crop yield, the correlation coefficient ranged between 0.74-0.78. All three SQIs were significantly correlated (r = 0.92-0.97) to each other and with crop yield (r = 0.65-0.79). Separate analyses by crop variety revealed that correlation was low indicating that some key aspects of soil quality related to crop response are important requirements for estimating SQI.
| S-EPMC4141864 | biostudies-literature
Project description:Extracellular vesicles (EVs) are small membrane-enclosed particles released by cells under various conditions specific to cells' biological states. Hence, mass-spectrometry (MS) based proteome analysis of EVs in plasma has gained much attention as a method to discover novel protein biomarkers. MS analysis of EVs in plasma is challenging and EV isolation is usually necessary. Therefore, we compared differences in abundance, subtypes, and contamination for EVs isolated by high-speed centrifugation, size exclusion chromatography (SEC), and peptide-affinity precipitation (PAP/ME kit) for subsequent MS-based proteome analysis. Successful EV isolation was evaluated by nanoparticle-tracking analysis, immunoblotting, and transmission electron microscopy, while EV abundance, EV subtypes, and contamination was evaluated by label-free tandem MS. High-speed centrifugation and SEC isolates showed high EV abundance at the expense of contamination by non-EV proteins and lipoproteins, respectively. These two methods also resulted in EVs of a similar type, however, with smaller EVs in SEC isolates. PAP isolates had a relatively low EV abundance and high contamination. We consider high-speed centrifugation and SEC suitable as EV isolation for MS biomarker studies, where the choice between the two should depend on the scientific questions and whether the focus is on larger or smaller EVs or a combination of both.
| S-EPMC7459681 | biostudies-literature
Project description:Developed and validated analytical methods for the determination of a wide spectrum of pesticide residues in honey and honeybee samples after the modification of QuEChERS extraction in combination with gas chromatography⁻tandem quadrupole mass spectrometry (GC-MS/MS) and liquid chromatography⁻tandem quadrupole mass spectrometry (LC-MS/MS) were discussed and compared. The developed methods were evaluated regarding the utilized equipment and reagents using Eco-Scale and compared in terms of extraction time, accuracy, precision, sensitivity and versatility, with similar procedures. The results proved that the QuEChERS protocol in combination with LC and GC techniques fulfills the requirements of green analytical chemistry, so it can be used as a tool in environmental monitoring. The recovery was 85⁻116% for honey and 85.5⁻103.5% for honeybee samples. The developed methods were successfully applied in monitoring real samples collected from three districts of Pomerania in Poland. Analysis of real samples revealed the presence of the following pesticides: bifenthrin, fenpyroximate, methidathione, spinosad, thiamethoxam, triazophos, metconazole and cypermethrin at levels higher than the MRLs established by the EU.
| S-EPMC6222677 | biostudies-literature