Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The crystal-form transition behaviours and morphology changes in a polyamide 6 cyclic dimer.

ABSTRACT: The characteristics of pure α- and β-form of the cyclic dimer (1,8-diazacyclotetradecane-2,9-dione) were systematically and integrally investigated during this study. The results showed that the α-form could dissolve and rapidly transform into the β-form in methanol, and in caprolactam solution at a lower temperature, an interesting transition occurred and formed co-precipitates, which refract colourful light under PLM. However, these dimers can aggregate in water, and they are then transformed into multi-slice layers and compact structures. The detailed transition behaviours between the two forms were further measured by FT-IR, XRD and DSC by varying the temperature from 25°C to 360°C, respectively, which showed that there are two endothermic transitions over the course of the heating programme. At a temperature of approximately 242°C, the β crystals were initially converted into α crystals, and then they melted when the temperature reached over 345°C. A video recorded under a light microscope also showed that the sublimation of the β cyclic dimer occurred after the transition. However, the α-form might sublimate at temperatures lower than 150°C when mixed with volatile matter.

SUBMITTER: Peng L

PROVIDER: S-EPMC6281911 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Strain-Induced Form Transition and Crystallization Behavior of the Transparent Polyamide.

Project description:A transparent polyamide, poly(4,4'-aminocyclohexyl methylene dodecanedicarboxylamide) (PAPACM12), was studied and characterized by in situ wide-angle X-ray diffraction (WAXD) to establish the relationship between its crystallization behavior, crystalline form transition under external fields, and macroscopic properties. During the heating process, cold crystallization occurred and increased, and there was no form transition below the melting point. During the isothermal process, PAPACM12 exhibited the same crystalline structure as that during the heating process. The crystalline structure of PAPACM12 was attributed to α-form crystal, which is the stable form, according to the WAXD diffraction peaks of the conventional AABB-type polyamides. During stretching deformation, the crystal transition from α-form to γ-form and strain-induced crystallization were observed to contribute to the PAPACM12 with higher breaking strength and elongation. This study firstly determine the crystalline structure of transparent polyamides, and then the controlled strain-induced crystallization and transformation are demonstrated to be effective preparation methods for polyamides with high properties.

| S-EPMC8036806 | biostudies-literature

Synthesis of cyclic Py-Im polyamide libraries.

Project description:Cyclic Py-Im polyamides containing two GABA turn units exhibit enhanced DNA binding affinity, but extensive studies of their biological properties have been hindered due to synthetic inaccessibility. A facile modular approach toward cyclic polyamides has been developed via microwave-assisted solid-phase synthesis of hairpin amino acid oligomer intermediates followed by macrocyclization. A focused library of cyclic polyamides 1-7 targeted to the androgen response element (ARE) and the estrogen response element (ERE) were synthesized in 12-17% overall yield. The Fmoc protection strategy also allows for selective modifications on the GABA turn units that have been shown to improve cellular uptake properties. The DNA binding affinities of a library of cyclic polyamides were measured by DNA thermal denaturation assays and compared to the corresponding hairpin polyamides. Fluorescein-labeled cyclic polyamides have been synthesized and imaged via confocal microscopy in A549 and T47D cell lines. The IC(50) values of compounds 1-7 and 9-11 were determined, revealing remarkably varying levels of cytotoxicity.

| S-EPMC3538502 | biostudies-literature

Closed-form density-based framework for automatic detection of cellular morphology changes.

Project description:A primary method for studying cellular function is to examine cell morphology after a given manipulation. Fluorescent markers attached to proteins/intracellular structures of interest in conjunction with 3D fluorescent microscopy are frequently exploited for functional analysis. Despite the central role of morphology comparisons in cell biological approaches, few statistical tools are available that allow biological scientists without a high level of statistical training to quantify the similarity or difference of fluorescent images containing multifactorial information. We transform intracellular structures into kernels and develop a multivariate two-sample test that is nonparametric and asymptotically normal to directly and quantitatively compare cellular morphologies. The asymptotic normality bypasses the computationally intensive calculations used by the usual resampling techniques to compute the P-value. Because all parameters required for the statistical test are estimated directly from the data, it does not require any subjective decisions. Thus, we provide a black-box method for unbiased, automated comparison of cell morphology. We validate the performance of our test statistic for finite synthetic samples and experimental data. Employing our test for the comparison of the morphology of intracellular multivesicular bodies, we detect changes in their distribution after disruption of the cellular microtubule cytoskeleton with high statistical significance in fixed samples and live cell analysis. These results demonstrate that density-based comparison of multivariate image information is a powerful tool for automated detection of cell morphology changes. Moreover, the underlying mathematics of our test statistic is a general technique, which can be applied in situations where two data samples are compared.

| S-EPMC3365204 | biostudies-literature

A novel dimer-tetramer transition captured by the crystal structure of the HIV-1 Nef.

Project description:HIV-1 Nef modulates disease progression through interactions with over 30 host proteins. Individual chains fold into membrane-interacting N-terminal and C-terminal core (Nef(core)) domains respectively. Nef exists as small oligomers near membranes and associates into higher oligomers such as tetramers or hexadecamers in the cytoplasm. Earlier structures of the Nef(core) in apo and complexed forms with the Fyn-kinase SH3 domain revealed dimeric association details and the role of the conserved PXXP recognition motif (residues 72-78) of Nef in SH3-domain interactions. The crystal structure of the tetrameric Nef reported here corresponds to the elusive cytoplasmic stage. Comparative analyses show that subunits of Nef(core) dimers (open conformation) swing out with a relative displacement of ~22 Å and rotation of ~174° to form the 'closed' tetrameric structure. The changes to the association are around Asp125, a conserved residue important for viral replication and the important XR motif (residues 107-108). The tetramer associates through C4 symmetry instead of the 222 symmetry expected when two dimers associate together. This novel dimer-tetramer transition agrees with earlier solution studies including small angle X-ray scattering, analytical ultracentrifugation, dynamic laser light scattering and our glutaraldehyde cross-linking experiments. Comparisons with the Nef(core)--Fyn-SH3 domain complexes reveal that the PXXP motif that interacts with the SH3-domain in the dimeric form is sterically occluded in the tetramer. However the 151-180 loop that is distal to the PXXP motif and contains several protein interaction motifs remains accessible. The results suggest how changes to the oligomeric state of Nef can help it distinguish between protein partners.

| S-EPMC3206816 | biostudies-literature

Crystal structure of the Mycoplasma arthritidis-derived mitogen in apo form reveals a 3D domain-swapped dimer.

Project description:Mycoplasma arthritidis-derived mitogen (MAM) is a superantigen that can activate large fractions of T cells bearing particular Vbeta elements of T cell receptor. Here, we report the crystal structure of a MAM mutant K201A in apo form (unliganded) at 2.8-A resolutions. We also partially refined the crystal structures of the MAM wild type and another MAM mutant L50A in apo forms at low resolutions. Unexpectedly, the structures of these apo MAM molecules display a three-dimensional domain-swapped dimer. The entire C-terminal domains of these MAM molecules are involved in the domain swapping. Functional analyses demonstrated that the K201A and L50A mutants do not show altered ability to bind to their host receptors and that they stimulate the activation of T cells as efficiently as does the wild type. Structural comparisons indicated that the "reconstituted" MAM monomer from the domain-swapped dimer displays large differences at the hinge regions from the MAM(wt) molecule in the receptor-bound form. Further comparison indicated that MAM has a flexible N-terminal loop, implying that conformational changes could occur upon receptor binding.

| S-EPMC2916022 | biostudies-literature

Crystallization and Characterization of Galdieria sulphuraria RUBISCO in Two Crystal Forms: Structural Phase Transition Observed in P21 Crystal Form

Project description:We have isolated ribulose-1,5-bisphosphate-carboxylase/oxygenase (RUBISCO) from the red algae Galdieria Sulphuraria. The protein crystallized in two different crystal forms, the I422 crystal form being obtained from high salt and the P21 crystal form being obtained from lower concentration of salt and PEG. We report here the crystallization, preliminary stages of structure determination and the detection of the structural phase transition in the P21 crystal form of G. sulphuraria RUBISCO. This red algae enzyme belongs to the hexadecameric class (L8S8) with an approximate molecular weight 0.6MDa. The phase transition in G. sulphuraria RUBISCO leads from two hexadecamers to a single hexadecamer per asymmetric unit. The preservation of diffraction power in a phase transition for such a large macromolecule is rare.

| S-EPMC3871842 | biostudies-literature

Structural basis for cyclic Py-Im polyamide allosteric inhibition of nuclear receptor binding.

Project description:Pyrrole-imidazole polyamides are a class of small molecules that can be programmed to bind a broad repertoire of DNA sequences, disrupt transcription factor-DNA interfaces, and modulate gene expression pathways in cell culture experiments. In this paper we describe a high-resolution X-ray crystal structure of a β-amino turn-linked eight-ring cyclic Py-Im polyamide bound to the central six base pairs of the sequence d(5'-CCAGTACTGG-3')(2), revealing significant modulation of DNA shape. We compare the DNA structural perturbations induced by DNA-binding transcripton factors, androgen receptor and glucocorticoid receptor, in the major groove to those induced by cyclic polyamide binding in the minor groove. The cyclic polyamide is an allosteric modulator that perturbs the DNA structure in such a way that nuclear receptor protein binding is no longer compatible. This allosteric perturbation of the DNA helix provides a molecular basis for disruption of transcription factor-DNA interfaces by small molecules, a minimum step in chemical control of gene networks.

| S-EPMC2954530 | biostudies-literature

Crystal structure and cellular functions of uPAR dimer.

Project description:Receptor dimerization of urokinase-type plasminogen activator receptor (uPAR) was previously identified at protein level and on cell surface. Recently, a dimeric form of mouse uPAR isoform 2 was proposed to induce kidney disease. Here, we report the crystal structure of human uPAR dimer at 2.96 Å. The structure reveals enormous conformational changes of the dimer compared to the monomeric structure: D1 of uPAR opens up into a large expanded ring that captures a β-hairpin loop of a neighboring uPAR to form an expanded β-sheet, leading to an elongated, highly intertwined dimeric uPAR. Based on the structure, we identify E49P as a mutation promoting dimer formation. The mutation increases receptor binding to the amino terminal fragment of its primary ligand uPA, induces the receptor to distribute to the basal membrane, promotes cell proliferation, and alters cell morphology via β1 integrin signaling. These results reveal the structural basis for uPAR dimerization, its effect on cellular functions, and provide a basis to further study this multifunctional receptor.

| S-EPMC8964761 | biostudies-literature

Effect of captivity on morphology: negligible changes in external morphology mask significant changes in internal morphology.

Project description:Captive breeding programmes are increasingly relied upon for threatened species management. Changes in morphology can occur in captivity, often with unknown consequences for reintroductions. Few studies have examined the morphological changes that occur in captive animals compared with wild animals. Further, the effect of multiple generations being maintained in captivity, and the potential effects of captivity on sexual dimorphism remain poorly understood. We compared external and internal morphology of captive and wild animals using house mouse (Mus musculus) as a model species. In addition, we looked at morphology across two captive generations, and compared morphology between sexes. We found no statistically significant differences in external morphology, but after one generation in captivity there was evidence for a shift in the internal morphology of captive-reared mice; captive-reared mice (two generations bred) had lighter combined kidney and spleen masses compared with wild-caught mice. Sexual dimorphism was maintained in captivity. Our findings demonstrate that captive breeding can alter internal morphology. Given that these morphological changes may impact organismal functioning and viability following release, further investigation is warranted. If the morphological change is shown to be maladaptive, these changes would have significant implications for captive-source populations that are used for reintroduction, including reduced survivorship.

| S-EPMC5990819 | biostudies-literature

A new crystal form of GABARAPL2.

Project description:The Atg8 protein family comprises the GABA type A receptor-associated proteins (GABARAPs) and microtubule-associated protein 1 light chains 3 (MAP1LC3s) that are essential mediators of autophagy. The LC3-interacting region (LIR) motifs of autophagy receptors and adaptors bind Atg8 proteins to promote autophagosome formation, cargo recruitment, and autophagosome closure and fusion to lysosomes. A crystal structure of human GABARAPL2 has been published [PDB entry 4co7; Ma et al. (2015), Biochemistry, 54, 5469-5479]. This was crystallized in space group P21 with a monoclinic angle of 90° and shows a pseudomerohedral twinning pathology. This article reports a new, untwinned GABARAPL2 crystal form, also in space group P21, but with a 98° monoclinic angle. No major conformational differences were observed between the structures. In the structure described here, the C-terminal Phe117 binds into the LIR docking site (LDS) of a neighbouring molecule within the asymmetric unit, as observed in the previously reported structure. This crystal contact blocks the LDS for co-crystallization with ligands. Phe117 of GABARAPL2 is normally removed during biological processing by Atg4 family proteases. These data indicate that to establish interactions with the LIR, Phe117 should be removed to eliminate the crystal contact and liberate the LDS for co-crystallization with LIR peptides.

| S-EPMC8098127 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data