Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Strain-Induced Form Transition and Crystallization Behavior of the Transparent Polyamide.

ABSTRACT: A transparent polyamide, poly(4,4'-aminocyclohexyl methylene dodecanedicarboxylamide) (PAPACM12), was studied and characterized by in situ wide-angle X-ray diffraction (WAXD) to establish the relationship between its crystallization behavior, crystalline form transition under external fields, and macroscopic properties. During the heating process, cold crystallization occurred and increased, and there was no form transition below the melting point. During the isothermal process, PAPACM12 exhibited the same crystalline structure as that during the heating process. The crystalline structure of PAPACM12 was attributed to α-form crystal, which is the stable form, according to the WAXD diffraction peaks of the conventional AABB-type polyamides. During stretching deformation, the crystal transition from α-form to γ-form and strain-induced crystallization were observed to contribute to the PAPACM12 with higher breaking strength and elongation. This study firstly determine the crystalline structure of transparent polyamides, and then the controlled strain-induced crystallization and transformation are demonstrated to be effective preparation methods for polyamides with high properties.

SUBMITTER: Zhou C

PROVIDER: S-EPMC8036806 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

The crystal-form transition behaviours and morphology changes in a polyamide 6 cyclic dimer.

Project description:The characteristics of pure α- and β-form of the cyclic dimer (1,8-diazacyclotetradecane-2,9-dione) were systematically and integrally investigated during this study. The results showed that the α-form could dissolve and rapidly transform into the β-form in methanol, and in caprolactam solution at a lower temperature, an interesting transition occurred and formed co-precipitates, which refract colourful light under PLM. However, these dimers can aggregate in water, and they are then transformed into multi-slice layers and compact structures. The detailed transition behaviours between the two forms were further measured by FT-IR, XRD and DSC by varying the temperature from 25°C to 360°C, respectively, which showed that there are two endothermic transitions over the course of the heating programme. At a temperature of approximately 242°C, the β crystals were initially converted into α crystals, and then they melted when the temperature reached over 345°C. A video recorded under a light microscope also showed that the sublimation of the β cyclic dimer occurred after the transition. However, the α-form might sublimate at temperatures lower than 150°C when mixed with volatile matter.

| S-EPMC6281911 | biostudies-literature

Pressureless Crystallization of Glass for Transparent Nanoceramics.

Project description:Transparent nanoceramics embedded with highly dense crystalline domains are promising for applications in missile guidance, infrared night vision, and laser and nuclear radiation detection. Unfortunately, current nanoceramics are strictly constrained by the stringent construction procedures such as super-high pressure and containerless processing. Here, a pressureless crystallization engineering strategy in glass for elaboration of transparent nanoceramics and fibers is proposed and experimentally demonstrated. By intentional creation of a sharp contrast between nucleation and growth rates, the crystal growth rate during glass crystallization can be significantly suppressed. Importantly, this unique phase-transition habit enables the achievement of transparent nanoceramics and even smooth fibers with extremely tiny crystalline size (≈20 nm) and high crystallinity (≈97%) under atmospheric pressure. This allows the generation of an attractive nonlinear optical response such as dynamic optical filtering and luminescence in the mid-infrared waveband of 4300-4950 nm. These findings highlight that the strategy to switch the phase-transition habit of glass into the unconventional crystallization regime may provide new opportunities for the creation of next-generation nanoceramics and fibers.

| S-EPMC6724475 | biostudies-literature

Facile Fabrication of Upconversion Photoluminescent Transparent Semiaromatic Polyamide Nanocomposites Through Interfacial Chemistry Modification.

Project description:Transparent upconversion photoluminescent polyamide nanocomposites were fabricated via a facile in situ polycondensation method with interfacial chemistry modification employing polyacrylic acid-functionalized upconversion nanoparticles (UCNP-PAA) as fillers and transparent semiaromatic polyamides (SAPA) as host materials. The as-prepared UCNP-PAA could be dispersed uniformly in the polyamide salt solution and the SAPA chains can be grafted to the UCNP-PAA through condensation reactions. The grafted SAPA ligand on the surface of UCNP increases the compatibility between SAPA and UCNP, thus causing uniform dispersion of the UCNP in the polyamide nanocomposites and improving the transmittance of the polyamide nanocomposites. The obtained polyamide nanocomposites are transparent and show strong green upconversion photoluminescence. This work solved the problem of the dispersity of incorporated nanoparticles and improving the transparency of nanocomposites and, more importantly, endowed the traditional engineering plastic with upconversion photoluminescent properties which can be applied in three-dimensional displays and the related solar cell field in the future.

| S-EPMC7689674 | biostudies-literature

Strain induced fragility transition in metallic glass.

Project description:Relaxation dynamics are the central topic in glassy physics. Recently, there is an emerging view that mechanical strain plays a similar role as temperature in altering the relaxation dynamics. Here, we report that mechanical strain in a model metallic glass modulates the relaxation dynamics in unexpected ways. We find that a large strain amplitude makes a fragile liquid become stronger, reduces dynamical heterogeneity at the glass transition and broadens the loss spectra asymmetrically, in addition to speeding up the relaxation dynamics. These findings demonstrate the distinctive roles of strain compared with temperature on the relaxation dynamics and indicate that dynamical heterogeneity inherently relates to the fragility of glass-forming materials.

| S-EPMC4479017 | biostudies-other

Crack-induced Ag nanowire networks for transparent, stretchable, and highly sensitive strain sensors.

Project description:Crack-based strain sensor systems have been known for its high sensitivity, but suffer from the small fracture strain of the thin metal films employed in the sensor which results in its negligible stretchability. Herein, we fabricated a transparent (>90% at 550?nm wavelength), stretchable (up to 100%), and sensitive (gauge factor (GF) of 30 at 100% strain) strain gauge by depositing an encapsulated crack-induced Ag nanowire (AgNW) network on a hydroxylated poly(dimethylsiloxane) (PDMS) film. Stretching the encapsulated AgNWs/PDMS resulted in the formation of a percolation network of nanowire ligaments with abundant percolation paths. The encapsulating polymer was designed to adhere strongly to both the AgNW and PDMS. The improved adhesion ensured the resistance of the crack-induced network of AgNWs varied reversibly, stably, and sensitively when stretched and released, at strains of up to 100%. The developed sensor successfully detected human motions when applied to the skin.

| S-EPMC5554203 | biostudies-literature

High-Temperature Shape Memory Behavior of Semicrystalline Polyamide Thermosets.

Project description:We have explored semicrystalline poly(decamethylene terephthalamide) (PA 10T) based thermosets as single-component high-temperature (>200 °C) shape memory polymers (SMPs). The PA 10T thermosets were prepared from reactive thermoplastic precursors. Reactive phenylethynyl (PE) functionalities were either attached at the chain termini or placed as side groups along the polymer main chain. The shape fixation and recovery performance of the thermoset films were investigated using a rheometer in torsion mode. By controlling the Mn of the reactive oligomers, or the PE concentration of the PE side-group functionalized copolyamides, we were able to design dual-shape memory PA 10T thermosets with a broad recovery temperature range of 227-285 °C. The thermosets based on the 1000 g mol-1 reactive PE precursor and the copolyamide with 15 mol % PE side groups show the highest fixation rate (99%) and recovery rate (?90%). High temperature triple-shape memory behavior can be achieved as well when we use the melt transition ( Tm ? 200 °C) and the glass transition ( Tg = ?125 °C) as the two switches. The recovery rate of the two recovery steps are highly dependent on the crystallinity of the thermosets and vary within a wide range of 74%-139% and 40-82% for the two steps, respectively. Reversible shape memory events could also be demonstrated when we perform a forward and backward deformation in a triple shape memory cycle. We also studied the angular recovery velocity as a function of temperature, which provides a thermokinematic picture of the shape recovery process and helps to program for desired shape memory behavior.

| S-EPMC5994727 | biostudies-literature

Opaque vs Transparent transcriptome of Streptococcus pneumoniae serotype 2 strain D39

Project description:Invasive pneumococcal disease is preceded by asymptomatic colonization of the human nasopharynx by Streptococcus pneumoniae. Progression from colonization to invasion is a watershed in the host-pathogen interaction, and exposes the pneumococcus to markedly different microenvironments. This in turn, requires alterations in gene expression profile to adapt to the new niche. One apparent adaptive mechanism is reversible phase variation between “transparent” and “opaque” colony opacity phenotypes. Transparent phase variants colonize the nasopharynx more efficiently than opaque variants of the same strain, while opaque variants exhibit higher systemic virulence. Previous studies have reported quantitative differences in surface components such as the capsule, teichoic acid and certain surface proteins between the two phenotypes, but the underlying regulatory mechanism is not understood. In the present study, we found no differences in expression of key surface proteins between opaque and transparent variants of S. pneumoniae strain D39, but opaque cells produced five-fold more capsular polysaccharide. Subsequent microarray and real-time RT-PCR analysis showed no differences in capsule gene expression, but several genes involved in uridine monophosphate (UMP) biosynthesis were up-regulated in the opaque phenotype. This correlated with significant increases in the intracellular concentrations of both UMP and UDP-glucose, which are essential precursors for capsule biosynthesis. Our data suggest a novel mechanism for pneumococcal capsule regulation, in which rate-limiting precursor pathways are modulated rather than the capsule biosynthetic genes themselves. Keywords: Phase variants

2007-08-17 | GSE8797 | GEO

Pressureless glass crystallization of transparent yttrium aluminum garnet-based nanoceramics.

Project description:Transparent crystalline yttrium aluminum garnet (YAG; Y3Al5O12) is a dominant host material used in phosphors, scintillators, and solid state lasers. However, YAG single crystals and transparent ceramics face several technological limitations including complex, time-consuming, and costly synthetic approaches. Here we report facile elaboration of transparent YAG-based ceramics by pressureless nano-crystallization of Y2O3-Al2O3 bulk glasses. The resulting ceramics present a nanostructuration composed of YAG nanocrystals (77 wt%) separated by small Al2O3 crystalline domains (23 wt%). The hardness of these YAG-Al2O3 nanoceramics is 10% higher than that of YAG single crystals. When doped by Ce3+, the YAG-Al2O3 ceramics show a 87.5% quantum efficiency. The combination of these mechanical and optical properties, coupled with their simple, economical, and innovative preparation method, could drive the development of technologically relevant materials with potential applications in wide optical fields such as scintillators, lenses, gem stones, and phosphor converters in high-power white-light LED and laser diode.

| S-EPMC5862837 | biostudies-literature

Highly Transparent and Flexible Iontronic Pressure Sensors Based on an Opaque to Transparent Transition.

Project description:Human-computer interfaces, smart glasses, touch screens, and some electronic skins require highly transparent and flexible pressure-sensing elements. Flexible pressure sensors often apply a microstructured or porous active material to improve their sensitivity and response speed. However, the microstructures or small pores will result in high haze and low transparency of the device, and thus it is challenging to balance the sensitivity and transparency simultaneously in flexible pressure sensors or electronic skins. Here, for a capacitive-type sensor that consists of a porous polyvinylidene fluoride (PVDF) film sandwiched between two transparent electrodes, the challenge is addressed by filling the pores with ionic liquid that has the same refractive index with PVDF, and the transmittance of the film dramatically boosts from 0 to 94.8% in the visible range. Apart from optical matching, the ionic liquid also significantly improves the signal intensity as well as the sensitivity due to the formation of an electric double layer at the dielectric-electrode interfaces, and improves the toughness and stretchability of the active material benefiting from a plasticization effect. Such transparent and flexible sensors will be useful in smart windows, invisible bands, and so forth.

| S-EPMC7237840 | biostudies-literature

Phase transition induced strain in ZnO under high pressure.

Project description:Under high pressure, the phase transition mechanism and mechanical property of material are supposed to be largely associated with the transformation induced elastic strain. However, the experimental evidences for such strain are scanty. The elastic and plastic properties of ZnO, a leading material for applications in chemical sensor, catalyst, and optical thin coatings, were determined using in situ high pressure synchrotron axial and radial x-ray diffraction. The abnormal elastic behaviors of selected lattice planes of ZnO during phase transition revealed the existence of internal elastic strain, which arise from the lattice misfit between wurtzite and rocksalt phase. Furthermore, the strength decrease of ZnO during phase transition under non-hydrostatic pressure was observed and could be attributed to such internal elastic strain, unveiling the relationship between pressure induced internal strain and mechanical property of material. These findings are of fundamental importance to understanding the mechanism of phase transition and the properties of materials under pressure.

| S-EPMC4865855 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data