Reactions of a Polyhalide Ionic Liquid with Copper, Silver, and Gold.
Ontology highlight
ABSTRACT:
SUBMITTER: May B
PROVIDER: S-EPMC6317927 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Recently, freestanding atomically thick Fe metal patches up to 10 atoms wide have been fabricated experimentally in tiny pores in graphene. This concept can be extended conceptually to extended freestanding monolayers. We have therefore performed ab initio molecular dynamics simulations to evaluate the early melting stages of platinum, silver, gold, and copper freestanding metal monolayers. Our calculations show that all four freestanding monolayers will form quasi-2D liquid layers with significant out-of-plane motion and diffusion in the plane. Remarkably, we observe a 4% reduction in the Pt most likely bond length as the system enters the liquid state at 2400 K (and a lower effective spring constant), compared to the system at 1200 and 1800 K. We attribute this to the reduced average number of bonds per atom in the Pt liquid state. We used the highly accurate and reliable Density Functional Theory (DFT-D) method that includes dispersion corrections. These liquid states are found at temperatures of 2400 K, 1050 K, 1600 K, and 1400 K for platinum, silver, gold, and copper respectively. The pair correlation function drops in the liquid state, while the bond orientation order parameter is reduced to a lesser degree. Movies of the simulations can be viewed online (see Supplementary Material).
| S-EPMC5597059 | biostudies-literature
Project description:The copper(I), silver(I), and gold(I) metals bind π-ligands by σ-bonding and π-back bonding interactions. These interactions were investigated using bidentate ancillary ligands with electron donating and withdrawing substituents. The π-ligands span from ethylene to larger terminal and internal alkenes and alkynes. Results of X-ray crystallography, NMR, and IR spectroscopy and gas phase experiments show that the binding energies increase in the order Ag<Cu<Au and the binding energies are slightly higher for alkynes than for alkenes. Modulation of the electron density at the metal using substituents on the ancillary ligands shows that the π-back bonding interaction plays a dominant role for the binding in the copper and gold complexes.
| S-EPMC9305286 | biostudies-literature
Project description:We have developed a general method for reverse aromatic Finkelstein reactions. Good reaction yields were obtained when aryl iodides or aryl bromides were treated with copper halide salts as promoters in a 1-butyl-3-methylimidazolium bromide ([BMIM]Br) ionic liquid (IL) solvent at 140 °C for 8 h. Preliminary investigation supported that the copper salts were also the halide sources in halogen exchange reactions. The optimized conditions are applicable to a variety of substrates and have excellent functional group tolerance. Additionally, the [BMIM]Br solvent showed good stability for at least 10 consecutive runs. Results indicated that the [BMIM]Br solvent was recyclable for reverse aromatic Finkelstein reactions.
| S-EPMC6057234 | biostudies-literature
Project description:The widespread use of silver nanoparticles (Ag NPs) has raised substantial health risks to environmental and human beings. Although various negative effects had been reported, little is known about the epigenetic toxicity induced by Ag+ and Ag NPs. This study characterized physiological and lncRNA profiles to explore the toxic effects and epigenetic mechanisms in Tetrahymena thermophila on exposure to Ag+ and three types of Ag NPs. We found that both of Ag+ and Ag NPs exhibited strong growth-inhibiting effects on T. thermophila. The toxicity was mainly caused by high levels of reactive oxygen species (ROS), which subsequently led to lipid peroxidation and mitochondrial dysfunction. As a defense mechanism against oxidative stress, the protist elicited an antioxidant response. Importantly, 1250 lncRNAs were differentially expressed under Ag+ or Ag NPs exposure relative to the non-exposure control, which were clustered into 15 expression modules in weighted gene co-expression network analysis. These gene modules exhibited toxicant-specific expression patterns, indicating that they play various regulatory roles, including cell growth inhibition, cell membrane cation channel activation, and oxidoreductase activity promotion. Taken together, this research illuminates how post-transcriptional mechanisms of a ciliated protozoa regulate responses to Ag+ and Ag NPs toxicities.
2021-09-10 | GSE157616 | GEO
Project description:Silver nanofilament formation dynamics are reported for an ionic liquid (IL)-filled solid polymer electrolyte prepared by a direct-write process using a conductive atomic force microscope (C-AFM). Filaments are electrochemically formed at hundreds of xy locations on a ~40 nm thick polymer electrolyte, polyethylene glycol diacrylate (PEGDA)/[BMIM]PF6. Although the formation time generally decreases with increasing bias from 0.7 to 3.0 V, an unexpected non-monotonic maximum is observed ~ 2.0 V. At voltages approaching this region of inverted kinetics, IL electric double layers (EDLs) becomes detectable; thus, the increased nanofilament formation time can be attributed to electric field screening which hinders silver electro-migration and deposition. Scanning electron microscopy confirms that nanofilaments formed in this inverted region have significantly more lateral and diffuse features. Time-dependent formation currents reveal two types of nanofilament growth dynamics: abrupt, where the resistance decreases sharply over as little as a few ms, and gradual where it decreases more slowly over hundreds of ms. Whether the resistance change is abrupt or gradual depends on the extent to which the EDL screens the electric field. Tuning the formation time and growth dynamics using an IL opens the range of accessible resistance states, which is useful for neuromorphic applications. Graphical Abstract An ionic liquid (IL)-filled solid polymer electrolyte is presented with potential application in neuromorphic computing. Using a conductive AFM, direct-write of silver nanofilaments shows that a competition between IL EDL screening and nanofilament formation can be tuned as a control mechanism for nanofilament growth dynamics.
| S-EPMC8022840 | biostudies-literature
Project description:This work reports a new approach for the synthesis of extremely small monodispersed silver nanoparticles (AgNPs) (2.9-1.5) by reduction of silver nitrate in a new series of benzyl alkyl imidazolium ionic liquids (BAIILs)-based microemulsions (3a-f) as media and stabilizing agents. Interestingly, AgNPs isolated from the IILMEs bearing the bulkiest substituents (tert-butyl and n-butyl) (3f) displayed almost no nanoparticle agglomeration. In an in vitro antibacterial test against ESKAPE pathogens, all AgNPs-BAIILs had potent antibiotic activity, as reflected by antibacterial efficiency indices. Furthermore, when compared to other nanoparticles, these were the most effective in preventing biofilm formation by the tested bacterial strains. Moreover, the MTT assay was used to determine the cytotoxicity of novel AgNPs-BAIILs on healthy human skin fibroblast (HSF) cell lines. The MTT assay revealed that novel AgNPs-BAIILs showed no significant toxic effects on the healthy cells. Thus, the novel AgNPs-BAIILs microemulsions could be used as safe antibiotics for skin bacterial infection treatments. AgNPs isolated from BAIIL (3c) was found to be the most effective antibiotic of the nanoparticles examined.
| S-EPMC9952689 | biostudies-literature
Project description:Materials with reconfigurable optical properties are candidates for applications such as optical cloaking and wearable sensors. One approach to fabricate these materials is to use external fields to form and dissolve nanoscale conductive channels in well-defined locations within a polymer. In this study, conductive atomic force microscopy is used to electrochemically form and dissolve nanoscale conductive filaments at spatially distinct points in a polyethylene glycol diacrylate (PEGDA)-based electrolyte blended with varying amounts of ionic liquid (IL) and silver salt. The fastest filament formation and dissolution times are detected in a PEGDA/IL composite that has the largest modulus (several GPa) and the highest polymer crystal fraction. This is unexpected because filament formation and dissolution events are controlled by ion transport, which is typically faster within amorphous regions where polymer mobility is high. Filament kinetics in primarily amorphous and crystalline regions are measured, and two different mechanisms are observed. The formation time distributions show a power-law dependence in the crystalline regions, attributable to hopping-based ion transport, while amorphous regions show a normal distribution. The results indicate that the timescale of filament formation/dissolution is determined by local structure, and suggest that structure could be used to tune the optical properties of the film.
| S-EPMC8130571 | biostudies-literature
Project description:In the pair annihilation of ionic vacancies with opposite charges, a drastic excess heat production up to 410 kJ mol-1 in average at 10 T (i. e., 1.5 times larger than the heat production by the combustion of H2, 285.8 kJ mol-1) was observed, which was then attributed to the emission of the solvation energy stored in 0.61 nm radius vacancies with two unit charges. Under a high magnetic field, using Lorentz force, we made ionic vacancies created in copper cathodic and anodic reactions collide with each other, and measured the reaction heat by their annihilation. Ionic vacancy is initially created as a byproduct in electrode reaction in keeping the conservation of linear momentum and electric charge during electron transfer. The unstable polarized particle is stabilized by solvation, and the solvation energy is stored in the free space of the order of 0.1 nm surrounded by oppositely charged ionic cloud. The collision of the ionic vacancies was carried out by circulation-type magnetohydrodynamic electrode (c-type MHDE) composed of a rectangular channel with a pair of copper electrodes and a narrow electrolysis cell.
| S-EPMC6757050 | biostudies-literature
Project description:In this work, three different aqueous solutions containing imidazole-based ILs with different alkyl chain lengths ([Cnmim]Br, n = 2, 6, 12) were adopted as the medium for the synthesis of ionic liquid-polypyrrole (IL-PPy) composites. Herein, the ILs undertook the roles of the pyrrole solvent, the media for emulsion polymerization of PPy and PPy dopants, respectively. The electrochemical performances of the three IL-PPy composites on a glassy carbon electrode (GCE) were investigated by electrochemical experiments, which indicated that [C12mim]Br-PPy (C12-PPy) composites displayed better electrochemical performance due to their larger surface area and firmer immobilization on the GCE. Further, C12-PPy/GCE were decorated with Au microparticles by electrodeposition that can not only increase the conductivity, but also immobilize sufficient biomolecules on the electrode. Then, the obtained C12-PPy-Au/GCE with outstanding electrochemical performance was employed as a horseradish peroxidase (HRP) immobilization platform to fabricate a novel C12-PPy-Au-HRP/GCE biosensor for H₂O₂ detection. The results showed that the prepared C12-PPy-Au-HRP/GCE biosensor exhibited high sensitivity, fast response, and a wide detection range as well as low detection limit towards H₂O₂. This work not only provides an outstanding biomolecule immobilization matrix for the fabrication of highly sensitive biosensors, but also advances the understanding of the roles of ILs in improving the electrochemical performance of biosensors.
| S-EPMC6387225 | biostudies-literature
Project description:Two neutral copper(I) halide complexes ([Cu(BTU)2X], X = Cl, Br) were prepared by the reduction of the corresponding copper(II) halides (chloride or bromide) with a benzoylthiourea (BTU, N-(3,4-diheptyloxybenzoyl)-N'-(4-heptadecafluorooctylphenyl)thiourea) ligand in ethanol. The two copper(I) complexes show a very interesting combination of 2D supramolecular structures, liquid crystalline, emission, and 1D ionic conduction properties. Their chemical structure was ascribed based on ESI-MS, elemental analysis, IR, and NMR spectroscopies (1H and 13C), while the mesomorphic behavior was analyzed through a combination of differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and powder X-ray diffraction (XRD). These new copper(I) complexes have mesomorphic properties and exhibit a hexagonal columnar mesophase over a large temperature range, more than 100 K, as evidenced by DSC studies and POM observations. The thermogravimetric analysis (TG) indicated a very good thermal stability of these samples up to the isotropization temperatures and over the whole temperature range of the liquid crystalline phase existence. Both complexes displayed a solid-state emission with quantum yields up to 8% at ambient temperature. The electrical properties of the new metallomesogens were investigated by variable temperature dielectric spectroscopy over the entire temperature range of the liquid crystalline phase. It was found that the liquid crystal phases favoured anhydrous proton conduction provided by the hydrogen-bonding networks formed by the NH…X moieties (X = halide or oxygen) of the benzoylthiourea ligand in the copper(I) complexes. A proton conductivity of 2.97 × 10-7 S·cm-1 was achieved at 430 K for the chloro-complex and 1.37 × 10-6 S·cm-1 at 440K for the related bromo-complex.
| S-EPMC10220757 | biostudies-literature