Dataset Information

Sequential fractionation of the lignocellulosic components in hardwood based on steam explosion and hydrotropic extraction.

ABSTRACT:

Background

The forest biorefinery plays an important part in the evolving circular bioeconomy due to its capacity to produce a portfolio of bio-based and sustainable fuels, chemicals, and materials. To tap into its true potential, more efficient and environmentally benign methods are needed to fractionate woody biomass into its main components (cellulose, hemicellulose, and lignin) without reducing their potential for valorization. This work presents a sequential fractionation method for hardwood based on steam pretreatment (STEX) and hydrotropic extraction (HEX) with sodium xylene sulfonate. By prehydrolyzing the hemicellulose (STEX) and subsequently extract the lignin from the cellulose fraction (HEX), the major wood components can be recovered in separate process streams and be further valorized.

Results

Using autocatalyzed STEX and HEX, hemicellulose (> 70%) and lignin (~ 50%) were successfully fractionated and recovered in separate liquid streams and cellulose preserved (99%) and enriched (~ twofold) in the retained solids. Investigation of pretreatment conditions during HEX showed only incremental effects of temperature (150-190 °C) and hold-up time (2-8 h) variations on the fractionation efficiency. The hydrolyzability of the cellulose-rich solids was analyzed and showed higher cellulose conversion when treated with the combined process (47%) than with HEX alone (29%), but was inferior to STEX alone (75%). Protein adsorption and surface structure analysis suggested decreased accessibility due to the collapse of the fibrillose cellulose structure and an increasingly hydrophobic lignin as potential reasons.

Conclusion

This work shows the potential of sequential STEX and HEX to fractionate and isolate cellulose, hemicellulose, and a sulfur-free lignin in separate product streams, in an efficient, sustainable, and scalable process.

SUBMITTER: Olsson J

PROVIDER: S-EPMC6318938 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundAcetylated galactoglucomannan (AcGGM) is a complex hemicellulose found in softwoods such as Norway spruce (Picea abies). AcGGM has a large potential as a biorefinery feedstock and source of oligosaccharides for high-value industrial applications. Steam explosion is an effective method for extraction of carbohydrates from plant biomass. Increasing the reaction pH reduces the combined severity ( R 0 ' ) of treatment, affecting yields and properties of extracted oligosaccharides. In this study, steam explosion was used to extract oligosaccharides from Norway spruce wood chips soaked with sodium citrate and potassium phosphate buffers with pH of 4.0-7.0. Yields, monosaccharide composition of released oligosaccharides and biomass residue, their acetate content and composition of their lignin fraction were examined to determine the impact of steam explosion buffering on the extraction of softwood hemicellulose.ResultsReducing the severity of steam explosion resulted in lower yields, although the extracted oligosaccharides had a higher degree of polymerization. Higher buffering pH also resulted in a higher fraction of xylan in the extracted oligos. Oligosaccharides extracted in buffers of pH?>?5.0 were deacetylated. Buffering leads to a removal of acetylations from both the extracted oligosaccharides and the hemicellulose in the residual biomass. Treatment of the residual biomass with a GH5 family mannanase from Aspergillus nidulans was not able to improve the AcGGM yields. No hydroxymethylfurfural formation, a decomposition product from hexoses, was observed in samples soaked with buffers at pH higher than 4.0.ConclusionsBuffering the steam explosion reactions proved to be an effective way to reduce the combined severity ( R 0 ' ) and produce a wide range of products from the same feedstock at the same physical conditions. The results highlight the impact of chemical autohydrolysis of hemicellulose by acetic acid released from the biomass in hydrothermal pretreatments. Lower combined severity results in products with a lower degree of acetylation of both the extracted oligosaccharides and residual biomass. Decrease in severity appears not to be the result of reduced acetate release, but rather a result of inhibited autohydrolysis by the released acetate. Based on the results presented, the optimal soaking pH for fine-tuning properties of extracted AcGGM is below 5.0.

Project description:BackgroundBiogas production from lignocellulosic biomass is generally considered to be challenging due to the recalcitrant nature of this biomass. In this study, the recalcitrance of birch was reduced by applying steam-explosion (SE) pretreatment (210 °C and 10 min). Moreover, bioaugmentation with the cellulolytic bacterium Caldicellulosiruptor bescii was applied to possibly enhance the methane production from steam-exploded birch in an anaerobic digestion (AD) process under thermophilic conditions (62 °C).ResultsOverall, the combined SE and bioaugmentation enhanced the methane yield up to 140% compared to untreated birch, while SE alone contributed to the major share of methane enhancement by 118%. The best methane improvement of 140% on day 50 was observed in bottles fed with pretreated birch and bioaugmentation with lower dosages of C. bescii (2 and 5% of inoculum volume). The maximum methane production rate also increased from 4-mL CH4/g VS (volatile solids)/day for untreated birch to 9-14-mL CH4/g VS/day for steam-exploded birch with applied bioaugmentation. Bioaugmentation was particularly effective for increasing the initial methane production rate of the pretreated birch yielding 21-44% more methane than the pretreated birch without applied bioaugmentation. The extent of solubilization of the organic matter was increased by more than twofold when combined SE pretreatment and bioaugmentation was used in comparison with the methane production from untreated birch. The beneficial effects of SE and bioaugmentation on methane yield indicated that biomass recalcitrance and hydrolysis step are the limiting factors for efficient AD of lignocellulosic biomass. Microbial community analysis by 16S rRNA amplicon sequencing showed that the microbial community composition was altered by the pretreatment and bioaugmentation processes. Notably, the enhanced methane production by pretreatment and bioaugmentation was well correlated with the increase in abundance of key bacterial and archaeal communities, particularly the hydrolytic bacterium Caldicoprobacter, several members of syntrophic acetate oxidizing bacteria and the hydrogenotrophic Methanothermobacter.ConclusionOur findings demonstrate the potential of combined SE and bioaugmentation for enhancing methane production from lignocellulosic biomass.

Project description:Background Lignocellulosic biomass is considered as a potential source for sustainable biofuels. In the conversion process, a pretreatment step is necessary in order to overcome the biomass recalcitrance and allow for sufficient fermentable sugar yields in enzymatic hydrolysis. Steam explosion is a well known pretreatment method working without additional chemicals and allowing for efficient particle size reduction. However, it is not effective for the pretreatment of softwood and the harsh conditions necessary to achieve a highly digestible cellulose fraction lead to the partial degradation of the hemicellulosic sugars. Previous studies showed that the autohydrolysis pretreatreatment of softwood can benefit from the addition of 2-naphthol. This carbocation scavenger prevents lignin repolymerisation leading to an enhanced glucose yield in the subsequent enzymatic hydrolysis.Results In order to prevent the degradation of the hemicellulose, we investigated in this study a two-stage 2-naphthol steam explosion pretreatment. In the first stage, spruce wood is pretreated at a severity which is optimal for the autocatalytic hydrolysis of the hemicellulose. The hydrolyzate containing the solubilized sugars is withdrawn from the reactor and the remaining solids are pretreated with different amounts of 2-naphthol in a second stage at a severity that allows for high glucose yields in enzymatic hydrolysis. The pretreated spruce was subjected to enzymatic hydrolysis and to simultaneous saccharification and fermentation (SSF). In the first stage, the maximal yield of hemicellulosic sugars was 47.5% at a pretreatment severity of log R0 = 3.75 at 180 °C. In the second stage, a 2-naphthol dosage of 0.205 mol/mol lignin C9-unit increased the ethanol yield in SSF with a cellulose loading of 1% using the whole second stage pretreatment slurry by 17% from 73.6% for the control without 2-naphthol to 90.4%. At a higher solid loading corresponding to 5% w/w cellulose, the yields decreased due to higher concentrations of residual 2-naphthol in the biomass and the pretreatment liquor, but also due to higher concentrations of potential inhibitors like HMF, furfural and acetic acid. Experiments with washed solids, vacuum filtered solids and the whole slurry showed that residual 2-naphthol can inhibit the fermentation as a single inhibitor but also synergistically together with HMF, furfural and acetic acid.Conclusions This work shows that a two-stage pretreatment greatly enhances the recovery of hemicellulosic sugars from spruce wood. The presence of 2-naphthol in the second pretreatment stage can enhance the ethanol yield in SSF of steam explosion pretreated softwood at low cellulose concentrations of 1% w/w. However, with higher solid loadings of 5% w/w cellulose, the ethanol yields were in general lower due to the solid effect and a synergistic inhibition of HMF, furfural, acetic acid with residual 2-naphthol. The concentration of residual 2-naphthol tolerated by the yeast decreased with increasing concentrations of HMF, furfural, and acetic acid.