Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Impact of sporicidal fumigation with methyl bromide or methyl iodide on electronic equipment.

ABSTRACT: The effect of sporicidal fumigation with methyl bromide or methyl iodide on the functionality of valuable electronic equipment was evaluated using desktop computers as surrogates under target conditions of 200-250 mg/L fumigant for 48 h at 24-30 °C and 75-85% RH. Methyl iodide fumigation damaged light-emitting diodes and optical films in computer displays that were powered-on during fumigation. After five months of post-fumigation operation, five out of six methyl-bromide-fumigated and all six methyl-iodide-fumigated DVD ± RW optical drives failed. Deterioration of rubber spacers critical to maintaining correct disc geometry caused the failure. Metal coupons, included to measure corrosion, showed no significant differences in weight gain between control and fumigation conditions. Relative humidity sensors exhibited a substantial and sometimes irreversible reduction in sensitivity during and after methyl iodide fumigation. Methyl bromide and methyl iodide can cause damage to electronic equipment, but damage seems to be limited to organic materials rather than corrosion of metal surfaces.

SUBMITTER: Adrion AC

PROVIDER: S-EPMC6319391 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Negative effect of methyl bromide fumigation work on the central nervous system.

Project description:Methyl bromide (MB) is a fumigant that has been widely used for killing pests on plants in trade, soils, and structures worldwide due to its excellent permeability and insecticidal effect; however, MB should be replaced because it is an ozone-depleting substance. It is well-known that MB is highly toxic and hazardous to workers, but the effects of exposure in asymptomatic workers have not been explored. The purpose of this study is to investigate the impact of MB fumigation on the health of fumigators at a sensitive level. The electroencephalogram (EEG) and urinary bromide ion levels of 44 fumigators (the study group) and 20 inspectors (the control) were measured before and after fumigation work from February to August 2019 in Busan, Korea. The mean post-work concentration of bromide ion (18.311 μg/mg CRE) in the fumigators was significantly increased from the pre-work level (7.390 μg/mg CRE) (P<0.001). The fumigator post-work median frequencies (MDF) and alpha-to-theta ratios (ATR) of EEG index were significantly decreased compared to the pre-work values (P<0.05 for all indices). In contrast, there were no significant differences in inspector EEG indices and urinary bromide ion. The urinary bromide ion levels in all the subjects were negatively correlated with MDF (P = 0.032). In conclusion, fumigators' EEG indices and urinary bromide ion suggested that occupational exposure to MB negatively affected the health of workers, although the workers were asymptomatic.

| S-EPMC7398500 | biostudies-literature

Variations in methyl bromide concentration with distance and time during quarantine fumigation.

Project description:Methyl bromide (MB) is a highly toxic and ozone-depleting substance and should be replaced. Worker exposure to high MB concentrations during fumigation has been previously reported. However, variations in MB concentration as a function of distance from fumigated objects or of time after degassing have not been reported so far. In this study, air samples were collected at various distances from fumigated objects (oranges, wood in containers, and wood in tarpaulin) during injection and degassing and analyzed via gas chromatography according to the Occupational Safety and Health Agency method. In addition, MB concentrations were directly measured over time using a gas detector during degassing. Non-linear regression analysis of the logarithmically transformed data indicated a clear decrease in MB concentration with distance as well as time. Non-linear regression models were constructed to describe the decrease in MB concentration with distance from the objects and with time during degassing (P < 0.05 for all models). The results of this study could aid in establishing appropriate safety guidelines, and hence, in preventing risks related to MB exposure.

| S-EPMC8263420 | biostudies-literature

Whole-building decontamination of Bacillus anthracis Sterne spores by methyl bromide fumigation.

Project description:To evaluate the field inactivation of Bacillus anthracis Sterne spores with methyl bromide (MB) using commercial fumigation techniques.Eighty-seven wood and 87 glass coupons each containing ca. 1 × 10(6) B. anthracis Sterne spores, were placed in 22 locations inside a 1444 m(3) conference building. Four additional 12-coupon sets (six wood, six glass) were removed from the building at 16, 24, 32 and 40 h during fumigation. The building was sealed under two tarpaulins and fumigated with MB at ≥225 g m(-3) mean concentration for 48 h at 28°C and 83% RH. All B. anthracis spores fumigated for more than 16 h were inactivated. A single wood coupon from the 16-h set yielded ca. 2 × 10(3) CFU. No damage to the building or its contents was observed.MB fumigation is a rapid, economical and effective whole-structure decontamination method for B. anthracis spores.MB fumigation offers a method of whole-structure B. anthracis decontamination without removal of materials, damage to sensitive electronics, costly indoor retrofitting.

| S-EPMC4738447 | biostudies-other

Evaluation of Sporicidal Disinfectants for the Disinfection of Personal Protective Equipment During Biological Hazards.

Project description:A fast, effective, and safe disinfection of personal protective equipment (PPE) is vitally important for emergency forces involved in biological hazards. This study aimed to investigate a broad range of disinfectants to improve the established disinfection procedure. We analyzed the efficacy of chlorine-, peracetic acid-, and oxygen-based disinfectants against Bacillus spores on PPE. Therefore, spores of different Bacillus species were exposed to disinfectants on PPE material by using a standardized procedure covering the dried spores with disinfectants and applying mechanical distribution. Efficacy of disinfectants was quantified by determining the reduction factor (log10 levels) and number of viable spores left afterward. The chlorine-based granulate Hypochlorit CA G (2% chlorine) sufficiently inactivated Bacillus spores of risk groups 1 and 2, even with temperatures ranging from -20 to 35°C. Wofasteril® SC super (1.75% peracetic acid) achieved a reliable reduction of risk groups 1 and 2 and even fully virulent Bacillus spores by ≥5 log10 levels on PPE. With this, Hypochlorit-CA G and Wofasteril® SC super proved to be promising alternatives to the previously proven and widely used peracetic acid compound Wofasteril® (2% peracetic acid) for the disinfection of PPE when bacterial spores are known to be the contaminating agent. These results will help to improve the disinfection of PPE during biological hazards by providing new data on promising alternative compounds.

| S-EPMC7047094 | biostudies-literature

Europium-doped barium bromide iodide.

Project description:Single crystals of Ba(0.96)Eu(0.04)BrI (barium europium bromide iodide) were grown by the Bridgman technique. The title compound adopts the ordered PbCl(2) structure [Braekken (1932 ?). Z. Kristallogr.83, 222-282]. All atoms occupy the fourfold special positions (4c, site symmetry m) of the space group Pnma with a statistical distribution of Ba and Eu. They lie on the mirror planes, perpendicular to the b axis at y = ±0.25. Each cation is coordinated by nine anions in a tricapped trigonal prismatic arrangement.

| S-EPMC2971082 | biostudies-other

Strain induced electronic structure variation in methyl-ammonium lead iodide perovskite.

Project description:Methyl-ammonium lead iodide perovskite (CH3NH3PbI3) has drawn great attention due to its excellent photovoltaic properties. Because of its loosely compacted structure, the structural, electronic and optical properties of CH3NH3PbI3 are sensitive to external modulations. Strain effects on CH3NH3PbI3 are fully investigated by the first principles calculations. The results indicate that the inorganic framework deforms under compression or stretch and the embedded organic CH3NH3+ molecules rotate correspondingly. A band gap oscillation and a new structural phase in response to the external strain were observed for the first time. These phenomena are explained with the nonlinear structural deformation and phase transition under the external strains. The semi-quantitative relationship between the band gap variation and geometry change under the external strain is obtained. We found that the shift of valence band maximum under the external strain is mostly determined by the most stretched or compressed Pb-I bond of CH3NH3PbI3, and the shift of the conduction band minimum under the external strain is likely to be determined by the largest Pb-I-Pb bond angle in the system. These results are important for understanding of strain effects on semiconductors and guiding the experiments to improve the performance of the perovskite solar cells.

| S-EPMC5958122 | biostudies-other

3-Methyl-piperidinium bromide.

Project description:In the crystal structure of the title molecular salt, C(6)H(14)N(+)·Br(-), N-H?Br hydrogen bonds link the cations and anions to form a one-dimensional network.

| S-EPMC3379253 | biostudies-literature

4-Methyl-morpholinium bromide.

Project description:The six-membered ring in the title salt, C(5)H(12)NO(+)·Br(-), has a chair conformation. In the crystal, the cations are linked to the anions by N-H?Br hydrogen bonds.

| S-EPMC2979363 | biostudies-literature

(E)-1-Methyl-2-styrylpyridinium iodide.

Project description:In the title compound, C(14)H(14)N(+)·I(-), the cation exists in an E configuration with respect to the ethenyl bond and is slightly twisted, the inter-planar angle between the pyridinium and phenyl rings of the cation being 4.8?(2)°. In the crystal packing, the cations are stacked in an anti-parallel fashion along the a axis by a ?-? inter-action involving both pyridinium and phenyl rings; the centroid-centroid distance is 3.542?(3)?Å. Each iodide ion is sandwiched between two cations. The cations and iodide anions are linked together by weak C-H?I inter-actions, giving rise to ladder-like ribbons along the a axis.

| S-EPMC2977224 | biostudies-literature

2-Cyano-1-methyl-pyridinium iodide.

Project description:The cation in the title compound, C7H7N2 (+)·I(-), is planar (r.m.s. deviation for the nine fitted non-H atoms = 0.040?Å). The crystal packing is best described as undulating layers of cations and anions associated via C-H?I inter-actions.

| S-EPMC3793776 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data