Fabrication of supramolecular cyclodextrin-fullerene nonwovens by electrospinning.
Ontology highlight
ABSTRACT:
SUBMITTER: Yoshida H
PROVIDER: S-EPMC6334797 | biostudies-literature | 2019
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:From the viewpoint of green chemistry and environmental chemistry, an important challenge in the field of superhydrophobic materials is to create them with only bio-based molecules. We developed superhydrophobic and chemically stable poly(L-phenylalanine) (PolyPhe) nonwovens by electrospinning. PolyPhe was selected because, due to its very rigid chemical structure, it is one of the toughest and most hydrophobic polymers among polymers composed only of amino acids. The water contact angle on the nonwovens is a maximum of 160°, and the droplets are stably adhered and remain still on the nonwoven surface even if it is turned over, thereby suggesting a petal-type superhydrophobicity. The nonwovens show a good chemical stability, and their weight remains unchanged after 5 days immersion in acidic (pH 2) and basic (pH 12) conditions. In addition, the superhydrophobic property is not lost even after the alkali treatment. Such tough superhydrophobic materials are intriguing for further biomedical and environmental applications.
| S-EPMC6290602 | biostudies-literature
Project description:Carbon nanofiber nonwovens are promising materials for electrode or filtration applications; however, their utilization is obviated by a lack of high throughput production methods. In this study, we utilize a highly effective high-throughput method for the fabrication of polyacrylonitrile (PAN) nanofibers as a nonwoven on a dedicated substrate. The method employs rotational-, air pressure- and electrostatic forces to produce fibers from the inner edge of a rotating bell towards a flat collector. We investigate the impact of all above-mentioned forces on the fiber diameter, morphology, and bundling of the carbon-precursor PAN fibers. The interplay of radial forces with collector-facing forces has an influence on the uniformity of fiber deposition. Finally, the obtained PAN nanofibers are converted to carbon nonwovens by thermal treatment.
| S-EPMC8072871 | biostudies-literature
Project description:Electrospinning is a high-throughput, low-cost technique for manufacturing long fibers from solution. Conventionally, this technique is used with covalent polymers with large molecular weights. We report here the electrospinning of functional peptide-based supramolecular polymers from water at very low concentrations (<4 wt %). Molecules with low molecular weights (<1 kDa) could be electrospun because they self-assembled into one-dimensional supramolecular polymers upon solvation and the critical parameters of viscosity, solution conductivity, and surface tension were optimized for this technique. The supramolecular structure of the electrospun fibers could ensure that certain residues, like bioepitopes, are displayed on the surface even after processing. This system provides an opportunity to electrospin bioactive supramolecular materials from water for biomedical applications.
| S-EPMC3993936 | biostudies-literature
Project description:M13 bacteriophage (phage) nano- and microfibers were fabricated using electrospinning. Using liquid crystalline suspension of the phage, we successfully fabricated nano- and microscale pure phage fibers. Through a near field electrospinning process, we fabricated the desired phage fiber pattern with tunable direction and spacing. In addition, we demonstrated that the resulting phage fibers could be utilized as an electrostatic-stimulus responsive actuator. The near field electrospinning would be a very useful tool to design phage-based chemical sensors, tissue regenerative materials, energy generators, metallic and semiconductor nanowires in the future.
| S-EPMC9075989 | biostudies-literature
Project description:Ionizable cyclodextrins have attracted increasing attention in host-guest chemistry and pharmaceutical industry, mainly due to the introduction of favorable electrostatic interactions. The ionizable cyclodextrins could not only enhance its own solubility but also induce oppositely charged guests to form more stable complex. However, the aggregation induced by charged cyclodextrins has rarely been reported. In this work, guided by the concept of molecular-induced aggregation, a series of carboxyl modified cyclodextrins were synthesized via "click" and hydrolysis reaction. Then, UV-vis spectrum was used to investigate the aggregating behaviors induced by these cyclodextrins towards the cationic guest molecules. The results showed that only the hepta-carboxyl-β-cyclodextrin could induce the guest molecules to self-assemble into supramolecular spherical nanoparticles. Meanwhile, it could form stable inclusion complex with amantadine, a drug for anti-Parkinson and antiviral. The assembly behaviors were investigated by dynamic light scattering, scanning electron microscope, atomic force microscope, transmission electron microscope and NMR spectroscopy. The supramolecular nanoparticles induced by hepta-carboxyl-β-CD and its inclusion with amantadine could be used to encapsulate the model drug and achieve its controlled releasing behaviors.
| S-EPMC5431346 | biostudies-literature
Project description:Although electrospinning is considered a powerful and generic tool for the preparation of nanofiber webs, several issues still need to be overcome for real-world applications. Most of these issues stem from the use of a syringe-based system, where the key factor influencing successful electrospinning is the maintenance of several subtle balances such as those of between the mass and the electrical state. It is extremely difficult to maintain these balances throughout the spinning process until all the polymeric solution in the syringe has been consumed. To overcome these limitations, we have developed a syringeless electrospinning technique as an alternative and efficient means of preparing a nanofiber web. This new technique uses a helically probed rotating cylinder. This technique can not only cover conventional methods, but also provides several advantages over syringe-based and needless electrospinning in terms of productivity (6 times higher) and processibility. For example, we can produce nanofibers with highly crystalline polymers and nanofiber-webs comprising networks of several different polymers, which is sometimes difficult in conventional electrospinning. In addition, this method provides several benefits for colloidal electrospinning as well. This method should help expand the range of applications for electrospun nanofiber webs in the near future.
| S-EPMC5264178 | biostudies-literature
Project description:Building 3D electrospun macrostructures and monitoring the biological activities inside them are challenging. In this study, 3D fibrous polycaprolactone (PCL) macrostructures were successfully fabricated using in-house 3D electrospinning. The main factors supporting the 3D self-assembled nanofiber fabrication are the H3PO4 additives, flow rate, and initial distance. The effects of solution concentration, solvent, H3PO4 concentration, flow rate, initial distance, voltage, and nozzle speed on the 3D macrostructures were examined. The optimal conditions of 4 mL/h flow rate, 4 cm initial nozzle-collector distance, 14 kV voltage, and 1 mm/s nozzle speed provided a rapid buildup of cylinder macrostructures with 6 cm of diameter, reaching a final height of 16.18 ± 2.58 mm and a wall thickness of 3.98 ± 1.01 mm on one perimeter with uniform diameter across different sections (1.40 ± 1.10 μm average). Oxygen plasma treatment with 30-50 W for 5 min significantly improved the hydrophilicity of the PCL macrostructures, proving a suitable scaffold for in vitro cell cultures. Additionally, 3D images obtained by synchrotron radiation X-ray tomographic microscopy (SRXTM) presented cell penetration and cell growth within the scaffolds. This breakthrough in 3D electrospinning surpasses current scaffold fabrication limitations, opening new possibilities in various fields.
| S-EPMC11322913 | biostudies-literature
Project description:[60]Fullerene hexakisadducts possessing 12 carboxylic acid side chains form crystalline hydrogen-bonding frameworks in the solid state. Depending on the length of the linker between the reactive sites and the malonate units, the distance of the [60]fullerene nodes and thereby the spacing of the frameworks can be controlled and for the most elongated derivative, continuous channels are obtained within the structure. Stability, structural integrity and porosity of the material were investigated by powder X-ray diffraction, thermogravimetry and sorption measurements.
| S-EPMC5238557 | biostudies-literature
Project description:The electrospinning of highly concentrated solutions of cyclodextrin (CD) leads to bead-free nanofibers without the need of a polymeric carrier. The occurrence of numerous hydrogen bonds among CD molecules is the main driving force for their electrospinning, and hence, additives with hydrogen-bonding potential can disturb the aggregation of CD molecules and affect their electrospinning. In this study, we systematically investigated the influence of five different hydrogen-bonding additives, i.e., methylamine (MA), ethylenediamine (ED), urea, 2,2,2-trifluoroethanol (TFE), and 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), on the solution behavior of hydroxypropyl-β-CD (HP-β-CD) by rheology, conductivity, and NMR analyses, and the morphology of the electrospun HP-β-CD nanofibers by scanning electron microscopy. The 1H NMR chemical shifts of the HP-β-CD protons in D2O were observed with the incorporation of hydrogen-bonding molecules due to the occurrence of intermolecular associations between HP-β-CD and additives. Dynamic light scattering measurements revealed a clear decrease in the aggregate size with the introduction of additives. Unlike other additives, which showed a general decreasing trend in viscosity with increasing additive content, the addition of MA led to a significant increase in the viscosity with increasing concentration and gave rise to HP-β-CD nanofibers at lower concentrations. The addition of low concentrations of ED, urea, TFE, and HFIP led to thinner nanofibers due to the lower viscosity of the respective solutions. Increasing additive content deteriorated the electrospinnability of HP-β-CD solutions, resulting in beaded fibers. A systematic relationship was found between the solution viscosity and morphology of the respective electrospun fibers. Overall, this study, for the first time, reports the influence of hydrogen bonding on the polymer-free electrospinning of CD molecules and shows a correlation between solution properties and morphology of their electrospun nanofibers.
| S-EPMC6643398 | biostudies-literature
Project description:In this study, a high-efficiency photocatalyst was synthesized by Mn2+-doped ZnO nanofibres (NFs) fabricated by facile electrospinning and a following annealing process, in which Mn2+ successes incorporate to ZnO NFs lattice without changing any morphology and crystalline structure of ZnO. The photodegradation properties of ZnO loading with different concentrations of Mn2+ (5, 10, 15 and 50 at%) were investigated. The 50% MnO-ZnO composite owns excellent active photocatalytic performance (quantum efficiency up to 7.57%) compared to pure ZnO (0.16%) under visible light and can be considered as an efficient visible light photocatalyst material. We systematically analysed its catalytic mechanism and found that the enhancement belongs to the Mn doping effect and the phase junction between MnO and ZnO. The dominant mechanism of Mn doping leads to the presence of impurity levels in the band gap of ZnO, narrowing the optical band gap of ZnO. In addition, doped Mn2+ ions can be used as electron traps that inhibit the recombination process and promote electron-hole pair separation. In summary, this paper provides a convenient method for fabricating highly efficient visible light photocatalysts using controlled annealing.
| S-EPMC7211861 | biostudies-literature