Dataset Information

Sequential Solution Polymerization of Poly(3,4-ethylenedioxythiophene) Using V2O5 as Oxidant for Flexible Touch Sensors.

ABSTRACT: Various in situ synthesis methods have been developed for the polymerization of 3,4-ethylenedioxythiophene monomers, such as electropolymerization, oxidative chemical vapor deposition, and vapor phase polymerization. Meeting industrial requirements through these techniques has, however, proven challenging. Here, we introduce an alternative method to fabricate highly conductive poly(3,4-ethylenedioxythiophene) (PEDOT) films in situ by solution means. The process involves sequential deposition of oxidants (V2O5 in this case) and monomers. Excess reactants and by-products can be completely removed from the PEDOT film by MeOH rinsing. The obtained PEDOT films possess good crystallinity and high doping level, with carrier concentration three orders of magnitude higher than that of the commercial product (PH1000, Heraeus GmbH). The electrical conductivity of the as-cast PEDOT film reaches up to 1,420 S/cm. In addition, this method is fully compatible with large-scale printing techniques. These PEDOT conducting films enable the realization of flexible touch sensors, which demonstrate superior flexibility and sensitivity.

SUBMITTER: Chen R

PROVIDER: S-EPMC6352564 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Sequential Solution Polymerization of Poly(3,4-ethylenedioxythiophene) Using V<sub>2</sub>O<sub>5</sub> as Oxidant for Flexible Touch Sensors.

Chen Rui R Sun Kuan K Zhang Qi Q Zhou Yongli Y Li Meng M Sun Yuyang Y Wu Zhou Z Wu Yuyang Y Li Xinlu X Xi Jialei J Ma Chi C Zhang Yiyang Y Ouyang Jianyong J

iScience 20190105

Various in situ synthesis methods have been developed for the polymerization of 3,4-ethylenedioxythiophene monomers, such as electropolymerization, oxidative chemical vapor deposition, and vapor phase polymerization. Meeting industrial requirements through these techniques has, however, proven challenging. Here, we introduce an alternative method to fabricate highly conductive poly(3,4-ethylenedioxythiophene) (PEDOT) films in situ by solution means. The process involves sequential deposition of ...[more]

PMID: 30677740

Similar Datasets

Project description:Magnesium (Mg) is a promising biodegradable implant material because of its appropriate mechanical properties and safe degradation products. However, in vivo corrosion speed and hydrogen gas production need to be controlled for uses in biomedical applications. Here we report the development of a conducting polymer 3,4-ethylenedioxythiphene (PEDOT) and graphene oxide (GO) composite coating as a corrosion control layer. PEDOT/GO was electropolymerized on Mg samples in ethanol media. The coated Mg samples were subjected to various corrosion tests. The PEDOT/GO coating significantly reduced the rate of corrosion as evidenced by lower Mg ion concentration and pH of the corrosion media. In addition, the coating decreased the evolved hydrogen. Electrochemical analysis of the corroding samples showed more positive corrosion potential, a decreased corrosion current, and an increase in the polarization resistance. PEDOT/GO corrosion protection is attributed to three factors; an initial passive layer preventing solution ingress, buildup of negative charges in the film, and formation of corrosion protective Mg phosphate layer through redox coupling with Mg corrosion. To explore the biocompatibility of the coated implants in vitro, corrosion media from PEDOT/GO coated or uncoated Mg samples were exposed to cultured neurons where PEDOT/GO coated samples showed decreased toxicity. These results suggest that PEDOT/GO coating will be an effective treatment for controlling corrosion of Mg based medical implants.Coating Mg substrates with a PEDOT/GO composite coating showed a significant decrease in corrosion rate. While conducting polymer coatings have been used to prevent corrosion on various metals, there has been little work on the use of these coatings for Mg. Additionally, to our knowledge, there has not been a report of the combined used of conducting polymer and GO as a corrosion control layer. Corrosion control is attributed to an initial barrier layer followed by electrochemical coupling of the PEDOT/GO coating with the substrate to facilitate the formation of a protective phosphate layer. This coupling also resulted in a decrease in hydrogen produced during corrosion, which could further improve the host tissue integration of Mg implants. This work elaborates on the potential for electroactive polymers to serve as corrosion control methods.

Dataset Information

Sequential Solution Polymerization of Poly(3,4-ethylenedioxythiophene) Using V2O5 as Oxidant for Flexible Touch Sensors.

Publications

Sequential Solution Polymerization of Poly(3,4-ethylenedioxythiophene) Using V<sub>2</sub>O<sub>5</sub> as Oxidant for Flexible Touch Sensors.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets