Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Immediate-Release Nifedipine Binary Dry Powder Mixtures with Nanocellulose Featuring Enhanced Solubility and Dissolution Rate.

ABSTRACT: Nifedipine (NIF) is a 1,4-dihydropyridine-based calcium channel blocker with poor solubility, whose bioavailability is highly dependent on the type of formulation. Dry powder mixtures of 20% w/w NIF with microcrystalline cellulose (MCC) and its high surface area nanocellulose analogue, which is namely Cladophora (CLAD) cellulose, were produced by heating at the melting temperature of the drug for 1 h. Non-heated samples were used as a reference. The solid-state properties of the mixtures were characterized by scanning electron microscopy, differential scanning calorimetry and X-ray diffraction. The drug release was studied in biorelevant media, including simulated gastric fluid (SGF), fasted-state simulated intestinal fluid (FaSIF) and fed-state simulated intestinal fluid (FeSIF). An enhanced apparent solubility and faster dissolution rate of NIF were observed in the heated mixture of NIF with CLAD-H in all tested biorelevant media (i.e., SGF, FaSIF and FeSIF), which was due to NIF amorphization in the high surface area nanocellulose powder. Ordinary MCC, which is essentially non-porous, did not produce an enhancement of a similar magnitude. The results of the study suggest that dry powder formulation using high surface area nanocellulose is a facile new strategy for formulating calcium channel blocker drugs, which could potentially be a viable alternative to currently used soft gel liquid capsules.

SUBMITTER: Mantas A

PROVIDER: S-EPMC6359467 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Influence of high pressure compaction on solubility and intrinsic dissolution of ibuprofen binary mixtures employing standard excipients.

Project description:Enabling formulations often depend on functional excipients. However, the question remains whether excipients regarded as standard establish similar interactions and subsequently improvement of solubility when employed at unusual manufacturing process conditions. In this study, compaction of API under high pressure in the presence of hydrophilic excipients is proposed as a technique to improve the solubility and/or dissolution rate with an acceptable preservation of the supersaturation state. Binary mixtures of ibuprofen (IBU) with hydroxypropyl cellulose, isomalt, mannitol and sorbitol were compacted applying high pressure (500 MPa) with and without a previous co-milling step. Intrinsic dissolution rate (IDR) was selected to characterize and evaluate dissolution performance. The IDR of neat IBU increased from 5 to 88 fold and the aqueous solubility in the range of 3 to 54%. Regarding the polyols isomalt showed the highest impact on solubility and dissolution, without changing the crystallinity of IBU independent of a co-milling step. Even higher impact was achieved in combination with HPC. However, only without a previous co-milling step, ibuprofen remained crystalline, while co-milling induced an amorphous IBU-content of 38%. Based on XRPD and DSC findings, higher IDR and solubility values correlated with crystal modifications as well as IBU/excipient interactions.

| S-EPMC8022821 | biostudies-literature

Solubility of Organosolv Lignin in γ-Valerolactone/Water Binary Mixtures.

Project description:The solubility of lignin in a mixture of γ-valerolactone (GVL) and water at different weight ratios was measured using the Hildebrand solubility parameters. Based on the molecular structure of lignin, its solubility parameter (δ-value) was calculated as 25.5 MPa1/2 . The δ-value for aqueous GVL solvent increased from 23.1 MPa1/2 for pure GVL to 45.6 MPa1/2 for pure water. Therefore, the lignin solubility was predicted to increase with increasing GVL concentration in the aqueous mixture up to approximately 92-96 wt % of GVL. A ternary diagram describing the phase behavior of water-GVL-lignin mixtures at room temperature was constructed based on the experimental results. The three-component system exhibited a complex behavior with a liquid-liquid and solid-liquid-liquid phase split. The efficiency of the selected fractionation trials in a previous work was validated using the ternary solubility diagram. A promising recovery pathway and lignin isolation method were deduced from the results of this work.

| S-EPMC6586022 | biostudies-literature

Characterisation and deposition studies of recrystallised lactose from binary mixtures of ethanol/butanol for improved drug delivery from dry powder inhalers.

Project description:Dry powder inhaler formulations comprising commercial lactose-drug blends can show restricted detachment of drug from lactose during aerosolisation, which can lead to poor fine particle fractions (FPFs) which are suboptimal. The aim of the present study was to investigate whether the crystallisation of lactose from different ethanol/butanol co-solvent mixtures could be employed as a method of altering the FPF of salbutamol sulphate from powder blends. Lactose particles were prepared by an anti-solvent recrystallisation process using various ratios of the two solvents. Crystallised lactose or commercial lactose was mixed with salbutamol sulphate and in vitro deposition studies were performed using a multistage liquid impinger. Solid-state characterisation results showed that commercial lactose was primarily composed of the α-anomer whilst the crystallised lactose samples comprised a α/β mixture containing a lower number of moles of water per mole of lactose compared to the commercial lactose. The crystallised lactose particles were also less elongated and more irregular in shape with rougher surfaces. Formulation blends containing crystallised lactose showed better aerosolisation performance and dose uniformity when compared to commercial lactose. The highest FPF of salbutamol sulphate (38.0 ± 2.5%) was obtained for the lactose samples that were crystallised from a mixture of ethanol/butanol (20:60) compared to a FPF of 19.7 ± 1.9% obtained for commercial lactose. Engineered lactose carriers with modified anomer content and physicochemical properties, when compared to the commercial grade, produced formulations which generated a high FPF.

| S-EPMC3032097 | biostudies-literature

Batch versus continuous blending of binary and ternary pharmaceutical powder mixtures.

Project description:The material properties of excipients and active pharmaceutical ingredients (API's) are important parameters that affect blend uniformity of pharmaceutical powder formulations. With the current shift from batch to continuous manufacturing in the pharmaceutical industry, blending of excipients and API is converted to a continuous process. The relation between material properties and blend homogeneity, however, is generally based on batch-wise blending trials. Limited information is available on how material properties affect blending performance in a continuous process. Here, blending of API and excipients is studied in both a batch and a continuous process. Homogeneity of the resulting mixtures is analyzed, which reveals that the impact of material properties is very different in a continuous process. Where parameters such as particle size, density and flowability have significant impact on blending performance in a traditional batch process, continuous blending is more robust resulting in uniform blends for a large variety of blend compositions.

| S-EPMC8739470 | biostudies-literature

Solubility Measurements and Correlation of MBQ-167 in Neat and Binary Solvent Mixtures.

Project description:MBQ-167 is a novel, small-molecule dual inhibitor of Rac and Cdc42, small GTPases that are involved in cytoskeletal organization, cell cycle progression, and cell migration. In an in vivo mouse model, MBQ-167 has been shown to significantly reduce mammary tumor growth and metastasis and is currently undergoing preclinical studies for the treatment of metastatic cancer. To date, no solubility data have been reported for this compound. For this reason, the present study aims to determine the solubility of this compound in eight neat solvents (acetonitrile, 1-butanol, 2-butanol, ethanol, ethyl acetate, methanol, 1-propanol, and 2-propanol) and two binary solvent mixtures [ethyl acetate (2) + heptane (3) and ethanol (2) + water (3)] between the temperatures of 278.15 and 333.15 K. The results obtained employing the polythermal method show that the solubility of MBQ-167 increases with an increase in temperature in all neat solvents used within this study. Moreover, in the two binary solvent mixtures, the solubility of this compound increases with increasing temperature and decreases with an increasing mass fraction of the antisolvent (heptane or water). The experimental solubility data were correlated using the modified Apelblat and λh model equations. The predicted solubility data acquired from the Apelblat and λh model equations correlate well with the experimental solubility data as indicated by the low ARD % (≤1.8304 and ≤6.5366, respectively). No solvent-mediated polymorphic phase transitions were observed while performing the solubility studies, and no other solid forms were detected after the recrystallization in the solvents and solvent mixtures. The solubility data determined here can offer pathways to develop pharmaceutical crystallization processes that can further the translation of MBQ-167 into a clinical setting.

| S-EPMC9578765 | biostudies-literature

Laser Alloying Advantages by Dry Coating Metallic Powder Mixtures with SiOx Nanoparticles.

Project description:Up to now, minimizing segregation of free-flowing, microscale metal powder mixtures driven by different mass density is an open challenge. In this work, effects of particle size variation on homogeneity of Al-Cu mixtures, with a density ratio of 3.3, are examined. Dry coating Al particles with 0.3 wt% fumed silica SiOx nanoparticles significantly decreases interparticle attraction. This enlarges the range of free-flowing Al particle sizes to < 20 µm. Powder mixture homogeneity is examined optically in vibrated bulk powder and thinly spread layers. From various powder mixtures, solid samples are built layer by layer with the Additive Manufacturing (3D printing) technology Laser Beam Melting in metal powder bed (LBM). Chemical homogeneity of solids is evaluated via energy-dispersive X-ray spectroscopy, backscattered electron microscopy, metallographic analysis and tensile tests. Persistent homogeneity of Al-Cu powder mixtures and LBM solids is found only with particles < 20 µm dry coated with SiOx nanoparticles. Observed segregation phenomena are explained with a decrease in particle mobility at increasing local concentration and the decreasing effectiveness of mass in smaller particles. The main effects are based on geometry, so they are expected to be transferrable to other nanoparticles, alloying components and powder bed technologies, e.g., binder jetting.

| S-EPMC6215105 | biostudies-other

Exploring the Solubility Limits of Edaravone in Neat Solvents and Binary Mixtures: Experimental and Machine Learning Study.

Project description:This study explores the edaravone solubility space encompassing both neat and binary dissolution media. Efforts were made to reveal the inherent concentration limits of common pure and mixed solvents. For this purpose, the published solubility data of the title drug were scrupulously inspected and cured, which made the dataset consistent and coherent. However, the lack of some important types of solvents in the collection called for an extension of the available pool of edaravone solubility data. Hence, new measurements were performed to collect edaravone solubility values in polar non-protic and diprotic media. Such an extended set of data was used in the machine learning process for tuning the parameters of regressor models and formulating the ensemble for predicting new data. In both phases, namely the model training and ensemble formulation, close attention was paid not only to minimizing the deviation of computed values from the experimental ones but also to ensuring high predictive power and accurate solubility computations for new systems. Furthermore, the environmental friendliness characteristics determined based on the common green solvent selection criteria, were included in the analysis. Our applied protocol led to the conclusion that the solubility space defined by ordinary solvents is limited, and it is unlikely to find solvents that are better suited for edaravone dissolution than those described in this manuscript. The theoretical framework presented in this study provides a precise guideline for conducting experiments, as well as saving time and resources in the pursuit of new findings.

| S-EPMC10574143 | biostudies-literature

Solubility Determination and Correlation of Warfarin Sodium 2‑Propanol Solvate in Pure, Binary, and Ternary Solvent Mixtures.

Project description:The solubility of warfarin sodium isopropanol solvate (WS·IPA), a widely used anticoagulant, was determined at temperatures ranging from 278.15 to 333.15 K in four pure solvents (acetone, ethanol, IPA, and water), five binary solvent mixtures (IPA + acetone, IPA + ethanol, IPA + water, IPA + heptane, and IPA + hexane), and five ternary solvent mixtures (IPA + acetone + heptane, IPA + acetone + hexane, IPA + ethanol + heptane, IPA + ethanol + hexane, and IPA + water + heptane) using the polythermal method. It was demonstrated that the solubility of WS·IPA increases with increasing temperature in the pure solvents and at constant solvent composition in the solvent mixtures. In addition, the solubility of WS·IPA in IPA increases with increasing content of acetone, ethanol, and water, which act as cosolvents, and decreases with increasing content of heptane and hexane, which act as antisolvents. The experimental solubility data of WS·IPA in pure solvents and binary and ternary solvent mixtures were correlated using the modified Apelblat and λh model equations. The correlated solubility data agree with the experimental data based on the relative deviation and the average relative deviation (ARD %) values. Thus, the correlated and experimentally derived solubility data of WS·IPA provide a pathway to engineer advanced pharmaceutical crystallization processes for WS·IPA.

| S-EPMC7291792 | biostudies-literature

Binary Mixtures of Some Active Pharmaceutical Ingredients with Fatty Alcohols-The Criteria of Successful Eutectic Formation and Dissolution Improvement.

Project description:Pharmaceutical eutectics are solid mixtures, where the crystals of active pharmaceutical ingredients (APIs) are finely divided in the phase-separated microstructures. The size reduction makes the eutectic formation a viable option to improve the dissolution rate of the poorly soluble APIs. In the present study, ibuprofen, naproxen, and sorafenib were investigated in terms of their phase behaviors with fatty alcohols, such as tetradecanol, octadecanol, and docosanol. Among the studied APIs, only ibuprofen was able to form eutectics with the fatty alcohols, and this was in agreement with the feasibility prediction based on the van 't Hoff equation and solubility parameters. In vitro release behavior was significantly improved for the ibuprofen/octadecanol eutectic mixture, although the practical insolubility of octadecanol in water was the opposite of the outstanding hydrophilicity of usual eutectic formers. The feasibility prediction and the choice of eutectic formers in the present study will be useful in advancing the utility of the pharmaceutical eutectics.

| S-EPMC7698041 | biostudies-literature

Solubility of Sulfamethazine in the Binary Mixture of Acetonitrile + Methanol from 278.15 to 318.15 K: Measurement, Dissolution Thermodynamics, Preferential Solvation, and Correlation.

Project description:Solubility of sulfamethazine (SMT) in acetonitrile (MeCN) + methanol (MeOH) cosolvents was determined at nine temperatures between 278.15 and 318.15 K. From the solubility data expressed in molar fraction, the thermodynamic functions of solution, transfer and mixing were calculated using the Gibbs and van 't Hoff equations; on the other hand, the solubility data were modeled according to the Wilson models and NRTL. The solubility of SMT is thermo-dependent and is influenced by the solubility parameter of the cosolvent mixtures. In this case, the maximum solubility was achieved in the cosolvent mixture w0.40 at 318.15 K and the minimum in pure MeOH at 278.15 K. According to the thermodynamic functions, the SMT solution process is endothermic in addition to being favored by the entropic factor, and as for the preferential solvation parameter, SMT tends to be preferentially solvated by MeOH in all cosolvent systems; however, δx3,1<0.01, so the results are not conclusive. Finally, according to mean relative deviations (MRD%), the two models could be very useful tools for calculating the solubility of SMT in cosolvent mixtures and temperatures different from those reported in this research.

| S-EPMC8706450 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data