Dataset Information

HDPE/UHMWPE hybrid nanocomposites with surface functionalized graphene oxide towards improved strength and cytocompatibility.

ABSTRACT: High-density polyethylene (HDPE)-based and ultra-high molecular weight polyethylene (UHMWPE)-based composites with carbonaceous reinforcements are being widely investigated for biomedical applications. The enhancement of material properties critically depends on the nature, amount and compatibility of the reinforcement with the polymeric matrix. To this end, this study demonstrates the efficacy of a 'dual' hybrid approach of incorporating modified inorganic nanofiller into an optimized polyethylene blend. In particular, a unique synthesis strategy was adopted to design a covalently bonded maleated polyethylene (mPE) grafted modified graphene oxide (mGO) hybrid nanocomposite. In this scheme, polyethyleneimine (PEI) was initially attached onto GO to synthesize amine functionalized GO (GO-PEI). This is followed by mPE grafting, resulting in mGO. Melt-extrusion together with injection moulding of a polymer mix (60% HDPE-40% UHMWPE) with different proportions (less than or equal to 3 wt%) of surface functionalized GO was conducted to develop nanocomposites of different sizes and shapes. When compared with unreinforced PE blend, the nanocomposites with 1 wt% mGO exhibited an increase in ultimate tensile strength by 120% (up to 65 MPa) and elastic modulus by 40% (up to 908 MPa). The uniform dispersion of modified GO nanofillers, confirmed using X-ray micro-computed tomography and transmission electron microscopy, facilitated effective interfacial adhesion and compatibility with the hybrid polymer matrix. The variation in mechanical properties with GO/mGO addition to PE blend was critically discussed in reference to the structural modification of GO, crystallinity and nature of dispersion of fillers. Importantly, the nanocomposites support the attachment and proliferation of C2C12 murine myoblast cells over 3 days in culture in a statistically insignificant manner with respect to polymer blends without any nanofiller. Taken together, the experimental results suggest that HDPE/UHMWPE/mGO is a promising biomaterial for bone tissue engineering applications.

SUBMITTER: Bhusari SA

PROVIDER: S-EPMC6364642 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

HDPE/UHMWPE hybrid nanocomposites with surface functionalized graphene oxide towards improved strength and cytocompatibility.

Bhusari Shardul Atul SA Sharma Vidushi V Bose Suryasarathi S Basu Bikramjit B

Journal of the Royal Society, Interface 20190101 150

High-density polyethylene (HDPE)-based and ultra-high molecular weight polyethylene (UHMWPE)-based composites with carbonaceous reinforcements are being widely investigated for biomedical applications. The enhancement of material properties critically depends on the nature, amount and compatibility of the reinforcement with the polymeric matrix. To this end, this study demonstrates the efficacy of a 'dual' hybrid approach of incorporating modified inorganic nanofiller into an optimized polyethyl ...[more]

PMID: 30958172

Similar Datasets

Project description:The remarkable characteristics of graphene make it a model candidate for boosting the effectiveness of nano-adsorbents with high potential owing to its large surface area, π-π interaction, and accessible functional groups that interact with an adsorbate. However, the stacking of graphene reduces its influence adsorption characteristics and also its practical application. On the other hand, the widespread use of aromatic compounds in the industry has aggravated the contamination of the water environment, and how to effectively remove them has become a research hotspot. Herein, we develop the functionalization of silica nanoparticles on graphene oxide nanosheet (FGS) by a facile, cheap, and efficient synthesis protocol for adsorption of Trypan Blue (TB) and Bisphenol A (BPA). It was demonstrated that chemical activation with KOH at high autoclaving temperature successfully transformed rice husk ash (RHA) into FGS. The graphene oxide layered interlamination was kept open by using SiO2 to expose the interlayers' strong adsorption sites. XRD, EDX, FTIR, Raman spectroscopy, SEM, HR-TEM, and BET surface area are used to investigate the chemical composition, structure, morphology, and textural nature of the as-produced FGS hybrid nanocomposite. The various oxygen-containing functional groups of the hybrid nanocomposites resulted in a significantly increased adsorption capacity, according to experimental findings. In addition, FGS2, the best composite, has a specific surface area of 1768 m2g-1. Based on Langmuir isotherms, the maximal TB dye and BPA removal capacity attained after 30 min were 455 and 500 mg/g, respectively. The Langmuir isotherm model, a pseudo-second-order kinetic model, and an intraparticle diffusion model have all been used to provide mechanistic insights into the adsorption process. This suggests that BPA and TB adsorption on FGS2 is mostly chemically regulated monolayer adsorption. Due to its unique sp2-hybridized single-atom-layer structure, the exposed graphene oxide nanosheets' extremely hydrophobic effect, hydrogen bonding, and strong-electron donor-acceptor interaction contributed to their improved adsorption of BPA and TB. According to adsorption thermodynamics, FGS2 adsorption of TB and BPA is a spontaneous exothermic reaction that is aided by lowering the temperature. For adsorption-based wastewater cleanup, the produced nanocomposites with a regulated amount of carbon and silica in the form of graphene oxide and silica can be used. These findings suggest that functionalized GO/SiO2 hybrid nanocomposites could be a viable sorbent for the efficient and cost-effective removal of aromatic chemicals from wastewater.

Dataset Information

HDPE/UHMWPE hybrid nanocomposites with surface functionalized graphene oxide towards improved strength and cytocompatibility.

Publications

HDPE/UHMWPE hybrid nanocomposites with surface functionalized graphene oxide towards improved strength and cytocompatibility.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets