Dataset Information

Field Performance of a Novel Passive Bioaerosol Sampler using Polarized Ferroelectric Polymer Films.

ABSTRACT: Passive bioaerosol samplers can improve environmental and health protection by enhancing the practicality and cost-effectiveness of air sampling. Here, we present the outdoor field testing of a novel, passive bioaerosol sampler, the Rutgers Electrostatic Passive Sampler (REPS), based on the use of polarized, ferroelectric polymer film (poly(vinylidene fluoride)). Four 10-day-long field campaigns were conducted to compare total (culturable + non-culturable) and culturable bioaerosol collection efficiencies of REPS to passive samplers (PTFE settling filters and agar settling plates). These collection efficiencies were calculated relative to performance of an active, reference Button Sampler. Compared to passive PTFE filters, which exclusively rely on gravitational particle deposition, REPS collected a 7-fold higher total microorganism quantity. Relative to the Button Sampler, REPS collected 25% of the total number of bacteria and fungi and 65% of the culturable bacteria. Furthermore, REPS achieved this performance without any air movers, pumps, batteries or external power. Since the Button Samplers operated at 4 L/min, REPS was calibrated to have equivalent sampling rates of 2.6 L/min and 1.0 L/min for culturable bacteria and total microorganisms, respectively. These results suggest that REPS can passively collect airborne microorganisms, including culturable bacteria, with high efficiency over long-term sampling durations. REPS can provide better preservation of bacterial culturability because it has no active airflow, which desiccates microbes in active samplers. Since there are limited options available for long-term, unattended bioaerosol sampling, REPS can complement currently available bioaerosol sampling technologies for numerous environmental health applications, such as exposure assessment for epidemiology and monitoring aeroallergen trends.

SUBMITTER: Therkorn J

PROVIDER: S-EPMC6377157 | biostudies-literature | 2017

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Field Performance of a Novel Passive Bioaerosol Sampler using Polarized Ferroelectric Polymer Films.

Therkorn Jennifer J Thomas Nirmala N Scheinbeim Jerry J Mainelis Gediminas G

Aerosol science and technology : the journal of the American Association for Aerosol Research 20170428 7

Passive bioaerosol samplers can improve environmental and health protection by enhancing the practicality and cost-effectiveness of air sampling. Here, we present the outdoor field testing of a novel, passive bioaerosol sampler, the Rutgers Electrostatic Passive Sampler (REPS), based on the use of polarized, ferroelectric polymer film (poly(vinylidene fluoride)). Four 10-day-long field campaigns were conducted to compare total (culturable + non-culturable) and culturable bioaerosol collection ef ...[more]

PMID: 30774180

Similar Datasets

Project description:From June 2013 to March 2015, in total 41 passive sampler deployments of 2 wk duration each were conducted at 17 sites in South Philadelphia, PA, with results for benzene discussed here. Complementary time-resolved measurements with lower cost prototype fenceline sensors and an open-path ultraviolet differential optical absorption spectrometer were also conducted. Minimum passive sampler benzene concentrations for each sampling period ranged from 0.08 ppbv to 0.65 ppbv, with a mean of 0.25 ppbv, and were negatively correlated with ambient temperature (-0.01 ppbv/°C, R2 = 0.68). Co-deployed duplicate passive sampler pairs (N = 609) demonstrated good precision with an average and maximum percent difference of 1.5% and 34%, respectively. A group of passive samplers located within 50 m of a refinery fenceline had a study mean benzene concentration of 1.22 ppbv, whereas a group of samplers located in communities >1 km distant from facilities had a mean of 0.29 ppbv. The difference in the means of these groups was statistically significant at the 95% confidence level (p < 0.001). A decreasing gradient in benzene concentrations moving away from the facilities was observed, as was a significant period-to-period variation. The highest recorded 2-wk average benzene concentration for the fenceline group was 3.11 ppbv. During this period, time-resolved data from the prototype sensors and the open-path spectrometer detected a benzene signal from the west on one day in particular, with the highest 5-min path-averaged benzene concentration measured at 24 ppbv. Implications:Using a variation of EPA's passive sampler refinery fenceline monitoring method, coupled with time-resolved measurements, a multiyear study in South Philadelphia informed benzene concentrations near facilities and in communities. The combination of measurement strategies can assist facilities in identification and mitigation of emissions from fugitive sources and improve information on air quality complex air sheds.

Project description:Bioaerosol studies aim to describe the microbial content and increase understanding of the aerosolization processes linked to diseases. Air samplers are used to collect, identify, and quantify bioaerosols. Studies comparing the performances of air samplers have typically used a culture approach or have targeted a specific microorganism in laboratory settings. The objective of this study was to use environmental field samples to compare the efficiencies of 3 high-airflow-rate samplers for describing bioaerosol diversity using a next-generation sequencing approach. Two liquid cyclonic impactors and one electrostatic filter dry sampler were used in four wastewater treatment plants to target bacterial diversity and in five dairy farms to target fungal diversity. The dry electrostatic sampler was consistently more powerful in collecting more fungal and bacterial operational taxonomic units (OTUs). Substantial differences in OTU abundances between liquid and dry sampling were revealed. The majority of the diversity revealed by dry electrostatic sampling was not identified using the cyclonic liquid impactors. The findings from this work suggest that the choice of a bioaerosol sampler should include information about the efficiency and ability of samplers to cover microbial diversity. Although these results suggest that electrostatic filters result in better coverage of the microbial diversity among the tested air samplers, further studies are needed to confirm this hypothesis. While it is difficult to determine a single universally optimal air sampler, this work provides an in-depth look at some of the considerations that are essential when choosing an air sampler for studying the microbial ecology of bioaerosols.IMPORTANCE Associating bioaerosol exposure and health problems is challenging, and adequate exposure monitoring is a priority for scientists in the field. Conclusions that can be drawn from bioaerosol exposure studies are highly dependent on the design of the study and the methodologies used. The air sampling strategy is the first methodological step leading to an accurate interpretation of what is present in the air. Applying new molecular approaches to evaluate the efficiencies of the different types of samplers used in the field is necessary in order to circumvent traditional approaches and the biases they introduce to such studies. The results and conclusions provided in this paper should be taken in consideration when conducting a bioaerosol study.

Dataset Information

Field Performance of a Novel Passive Bioaerosol Sampler using Polarized Ferroelectric Polymer Films.

Publications

Field Performance of a Novel Passive Bioaerosol Sampler using Polarized Ferroelectric Polymer Films.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets