Dataset Information

On the Kinetics of Degradation Reaction Determined Post Accelerated Weathering of Polyolefin Plastic Waste Blends.

ABSTRACT: Polyolefin (PO) polymers constitute the majority of consumer plastic commodities. The reliance on such materials make it near imposable to avoid touching one in any given day. Therefore, the accumulation of plastic solid waste (PSW) in developed and developing societies alike requires immediate attention to manage and valorize this type of waste. In this work, PSW originating from real life sources and virgin linear low-density polyethylene (LLDPE) films were compounded in a mechanical recycling effort. The recycled blends constituted up to 100% (by weight) of the waste material. Accelerated weathering (aging) was conducted on the blends, reaching threshold limit of exposure to study the major changes occurring on the recycled blends. Thermogravimetry and differential scanning calorimetry (DSC) were used to determine their characteristics and applicability for future recycling using thermo-chemical treatment (TCT) methods. Analytical solution methods following the international committee of thermal analysis and calorimetry (ICTAC) were followed in conducting the measurements and kinetic calculations alike. A novel analytical mathematical solution model is also introduced to determine both the pre-exponential factor (Ao) and apparent activation energy (Ea) of the degradation reaction. The model proved to be a more accurate analysis tool, and the work in whole enabled the determination of future plans for using such waste components as a feedstock to thermal units.

SUBMITTER: Al-Salem SM

PROVIDER: S-EPMC6388198 | biostudies-literature | 2019 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

On the Kinetics of Degradation Reaction Determined Post Accelerated Weathering of Polyolefin Plastic Waste Blends.

Al-Salem S M SM Behbehani M H MH Karam H J HJ Al-Rowaih S F SF Asiri F M FM

International journal of environmental research and public health 20190130 3

Polyolefin (PO) polymers constitute the majority of consumer plastic commodities. The reliance on such materials make it near imposable to avoid touching one in any given day. Therefore, the accumulation of plastic solid waste (PSW) in developed and developing societies alike requires immediate attention to manage and valorize this type of waste. In this work, PSW originating from real life sources and virgin linear low-density polyethylene (LLDPE) films were compounded in a mechanical recycling ...[more]

PMID: 30704142

Similar Datasets

Project description:Feedstocks such as coal, biomass, plastics, and their blends have the potential to serve as fuels for the thermochemical conversion process owing to their relatively high calorific values. Nevertheless, the relative proportion of these feedstock blends has a pivotal influence over the overall energy conversion efficiency. Consequently, conducting a comprehensive study to optimize the blend proportion becomes crucial in order to obtain an optimal fuel. The study aims to investigate the thermochemical characterization and kinetics of blends composed of lignite coal, southern pine biomass, and municipal waste plastic blend to optimize the blend proportion. This optimization has been achieved through an analysis of 12 distinct blends, considering factors such as combustion reaction kinetics, combustion stability, and comprehensive combustion indices. The reaction kinetics, including activation energy, pre-exponential factor, and reaction order, were estimated using various methods, including Vyazovkin, Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa, Master-plot, and multidistributed activation energy methods. The investigation revealed that increasing the biomass content within the blends enhances both the combustion stability and combustion performance. The multidistributed activation energy model exhibited a good fit with both the experimental thermogravimetric and the derivative thermogravimetric curves, achieving linear regression fitness values of 0.99 and 0.95, respectively. To showcase the viability of these blends as energy generation feedstock, the optimal blend comprised of 60% biomass, 10% coal, and 30% municipal waste plastic blend, possessing the lowest activation energy (110 kJ/mol), was employed as the feedstock for the fluidized bed oxy-steam gasification process. The gasification process resulted in a synthetic gas consisting of 47.79 mol % H2, 27.96 mol % CO, 5.85 mol % CH4, and 18.38 mol % CO2 (nitrogen-free basis) with a cold gas efficiency of 72.88%. The findings of this study can offer valuable insights into global industries engaged in the thermochemical conversion of solid waste materials.

Dataset Information

On the Kinetics of Degradation Reaction Determined Post Accelerated Weathering of Polyolefin Plastic Waste Blends.

Publications

On the Kinetics of Degradation Reaction Determined Post Accelerated Weathering of Polyolefin Plastic Waste Blends.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets