Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Deformation Twinning in Polycrystalline Mg Microstructures at High Strain Rates at the Atomic Scales.

ABSTRACT: Large scale molecular dynamics (MD) simulations are carried out to investigate the twinning behavior as well as the atomic scale micromechanisms of growth of tension and compression twins in polycrystalline Mg microstructures at high strain rates. A new defect characterization algorithm (extended-common neighbor analysis (E-CNA)) is developed that allows for an efficient identification of various types of twins in HCP microstructures. Unlike other local orientation analysis methods, the E-CNA method allows for atomic scale characterization of the structure of different types of twin boundaries in HCP microstructures. The MD simulations suggest that the local orientation of individual grains with the loading axis plays a critical role in determining the ability of grains to nucleate either compression twins or tension twins. The twinning behavior is observed through nucleation of a pair of planar faults and lateral growth of the twins occurs through nucleation of steps along the planar faults. The kinetics of migration of steps that determine the rate of growth of twins are investigated at the atomic scales. The twin tip velocity computed at high strain rates compares well with the experimentally reported values in the literature.

SUBMITTER: Agarwal G

PROVIDER: S-EPMC6400955 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Atomic-scale observation of nucleation- and growth-controlled deformation twinning in body-centered cubic nanocrystals.

Project description:Twinning is an essential mode of plastic deformation for achieving superior strength and ductility in metallic nanostructures. It has been generally believed that twinning-induced plasticity in body-centered cubic (BCC) metals is controlled by twin nucleation, but facilitated by rapid twin growth once the nucleation energy barrier is overcome. By performing in situ atomic-scale transmission electron microscopy straining experiments and atomistic simulations, we find that deformation twinning in BCC Ta nanocrystals larger than 15 nm in diameter proceeds by reluctant twin growth, resulting from slow advancement of twinning partials along the boundaries of finite-sized twin structures. In contrast, reluctant twin growth can be obviated by reducing the nanocrystal diameter to below 15 nm. As a result, the nucleated twin structure penetrates quickly through the cross section of nanocrystals, enabling fast twin growth via facile migration of twin boundaries leading to large uniform plastic deformation. The present work reveals a size-dependent transition in the nucleation- and growth-controlled twinning mechanism in BCC metals, and provides insights for exploiting twinning-induced plasticity and breaking strength-ductility limits in nanostructured BCC metals.

| S-EPMC10791697 | biostudies-literature

Atomic-Scale Insights into the Deformation Mechanism of the Microstructures in Precipitation-Strengthening Alloys.

Project description:Clarifying the deformation behaviors of microstructures could greatly help us understand the precipitation-strengthening mechanism in alloys. However, it is still a formidable challenge to study the slow plastic deformation of alloys at the atomic scale. In this work, the phase-field crystal method was used to investigate the interactions between precipitates, grain boundary, and dislocation during the deformation processes at different degrees of lattice misfits and strain rates. The results demonstrate that the pinning effect of precipitates becomes increasingly strong with the increase of lattice misfit at relatively slow deformation with a strain rate of 10-4. The cut regimen prevails under the interaction between coherent precipitates and dislocations. In the case of a large lattice misfit of 19.3%, the dislocations tend to move toward the incoherent phase interface and are absorbed. The deformation behavior of the precipitate-matrix phase interface was also investigated. Collaborative deformation is observed in coherent and semi-coherent interfaces, while incoherent precipitate deforms independently of the matrix grains. The faster deformations (strain rate is 10-2) with different lattice misfits all are characterized by the generation of a large number of dislocations and vacancies. The results contribute to important insights into the fundamental issue about how the microstructures of precipitation-strengthening alloys deform collaboratively or independently under different lattice misfits and deformation rates.

| S-EPMC10004733 | biostudies-literature

Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures.

Project description:Recently, we have found that fully recrystallized ultrafine-grained (UFG) microstructures could be realized in a commercial precipitation-hardened Magnesium (Mg) alloy. The UFG specimens exhibited high strength and large ductility under tensile test, but underlying mechanisms for good mechanical properties remained unclear. In this study, we have carried out systematic observations of deformation microstructures for revealing the influence of grain size on the change of dominant deformation modes. We found that plastic deformation of conventionally coarse-grained specimen was predominated by {0001} <11-20> slip and {10-12} <10-11> twinning, and the quick decrease of work-hardening rate was mainly due to the early saturation of deformation twins. For the UFG specimens, {10-12} <10-11> twinning was dramatically suppressed, while non-basal slip systems containing <c> component of Burgers vector were activated, which contributed significantly to the enhanced work-hardening rate leading to high strength and large ductility. It was clarified by this study that limited ductility of hexagonal Mg alloys could be overcome by activating unusual slip systems (<c + a> dislocations) in fully recrystallized UFG microstructures.

| S-EPMC6691010 | biostudies-literature

A dataset of synthetic face centered cubic 3D polycrystalline microstructures, grain-wise microstructural descriptors and grain averaged stress fields under uniaxial tensile deformation.

Project description:This data article presents a data set comprised of 36 synthetic 3D equiaxed polycrystalline microstructures, the microstructural descriptors for each grain, and the stress and strain fields resulting from crystal plasticity simulations mimicking uniaxial tensile deformation to a total strain of 4%. This is related to the research article entitled "Applied Machine Learning to predict stress hotspots I: Face Centered Cubic Materials" (Mangal and Holm, 2018) [1]. The microstructures were created using an open source Dream.3D software tool, and the crystal plasticity simulations were carried out using the elasto-viscoplastic fast Fourier transform (EVPFFT) method. Six different kinds of FCC textures are represented with six stochastically different microstructures with varying texture intensity for each texture kind. This dataset is freely available in a Mendeley Data archive "A dataset of synthetic face centered cubic 3D polycrystalline microstructures, grain-wise microstructural descriptors and grain averaged stress fields under uniaxial tensile deformation" located at 〈http://dx.doi.org/10.17632/ss75fdg5dg.1〉 for any academic, educational, or research purposes.

| S-EPMC6141364 | biostudies-literature

Twinning-mediated formability in Mg alloys.

Project description:Mg alloys are promising candidates for automotive applications due to their low density and high specific strength. However, their widespread applications have not been realized mainly because of poor formability at room temperature, arising from limited number of active deformation systems and strong basal texture. It has been recently shown that Mg-Zn-Ca alloys have excellent stretch formability, which has been ascribed to their weak basal texture. However, the distribution of basal poles is orthotropic, which might result in anisotropy during deformation and have adverse effect on formability. Here, we show that tension twinning is mainly responsible for enhanced formability of Mg-Zn-Ca alloys. We found that tension twinning is quite active during both uniaxial deformation and biaxial deformation of Mg-Zn-Ca alloy even under the stress conditions unfavourable for the formation of tensile twins. Our results provide new insights into the development of Mg alloys having high formability.

| S-EPMC4772127 | biostudies-other

Deformation twinning induced decomposition of lamellar LPSO structure and its re-precipitation in an Mg-Zn-Y alloy.

Project description:The high hardness or yield strength of an alloy is known to benefit from the presence of small-scale precipitation, whose hardening effect is extensively applied in various engineering materials. Stability of the precipitates is of critical importance in maintaining the high performance of a material under mechanical loading. The long period stacking ordered (LPSO) structures play an important role in tuning the mechanical properties of an Mg-alloy. Here, we report deformation twinning induces decomposition of lamellar LPSO structures and their re-precipitation in an Mg-Zn-Y alloy. Using atomic resolution scanning transmission electron microscopy (STEM), we directly illustrate that the misfit dislocations at the interface between the lamellar LPSO structure and the deformation twin is corresponding to the decomposition and re-precipitation of LPSO structure, owing to dislocation effects on redistribution of Zn/Y atoms. This finding demonstrates that deformation twinning could destabilize complex precipitates. An occurrence of decomposition and re-precipitation, leading to a variant spatial distribution of the precipitates under plastic loading, may significantly affect the precipitation strengthening.

| S-EPMC4951811 | biostudies-other

Acoustic Emission of Deformation Twinning in Magnesium.

Project description:The Acoustic Emission of deformation twinning in Magnesium is investigated in this article. Single crystal testing with combined full field deformation measurements, as well as polycrystalline testing inside the scanning electron microscope with simultaneous monitoring of texture evolution and twin nucleation were compared to testing at the laboratory scale with respect to recordings of Acoustic Emission activity. Single crystal testing revealed the formation of layered twin boundaries in areas of strain localization which was accompanied by distinct changes in the acoustic data. Testing inside the microscope directly showed twin nucleation, proliferation and growth as well as associated crystallographic reorientations. A post processing approach of the Acoustic Emission activity revealed the existence of a class of signals that appears in a strain range in which twinning is profuse, as validated by the in situ and ex situ microscopy observations. Features extracted from such activity were cross-correlated both with the available mechanical and microscopy data, as well as with the Acoustic Emission activity recorded at the laboratory scale for similarly prepared specimens. The overall approach demonstrates that the method of Acoustic Emission could provide real time volumetric information related to the activation of deformation twinning in Magnesium alloys, in spite of the complexity of the propagation phenomena, the possible activation of several deformation modes and the challenges posed by the sensing approach itself when applied in this type of materials evaluation approach.

| S-EPMC5509273 | biostudies-other

Size-induced twinning in InSb semiconductor during room temperature deformation.

Project description:Room-temperature deformation mechanism of InSb micro-pillars has been investigated via a multi-scale experimental approach, where micro-pillars of 2 µm and 5 µm in diameter were first fabricated by focused ion beam (FIB) milling and in situ deformed in the FIB-SEM by micro-compression using a nano-indenter equipped with a flat tip. Strain rate jumps have been performed to determine the strain rate sensitivity coefficient and the related activation volume. The activation volume is found to be of the order of 3-5 b3, considering that plasticity is mediated by Shockley partial dislocations. Transmission electron microscopy (TEM) thin foils were extracted from deformed micro-pillars via the FIB lift-out technique: TEM analysis reveals the presence of nano-twins as major mechanism of plastic deformation, involving Shockley partial dislocations. The presence of twins was never reported in previous studies on the plasticity of bulk InSb: this deformation mechanism is discussed in the context of the plasticity of small-scale samples.

| S-EPMC8486849 | biostudies-literature

Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy.

Project description:The excellent cryogenic tensile properties of the CrMnFeCoNi alloy are generally caused by deformation twinning, which is difficult to achieve at room temperature because of insufficient stress for twinning. Here, we induced twinning at room temperature to improve the cryogenic tensile properties of the CrMnFeCoNi alloy. Considering grain size effects on the critical stress for twinning, twins were readily formed in the coarse microstructure by cold rolling without grain refinement by hot rolling. These twins were retained by partial recrystallization and played an important role in improving strength, allowing yield strengths approaching 1?GPa. The persistent elongation up to 46% as well as the tensile strength of 1.3?GPa are attributed to additional twinning in both recrystallized and non-recrystallization regions. Our results demonstrate that non-recrystallized grains, which are generally avoided in conventional alloys because of their deleterious effect on ductility, can be useful in achieving high-strength high-entropy alloys.

| S-EPMC5494191 | biostudies-literature

Deformation-induced grain growth and twinning in nanocrystalline palladium thin films.

Project description:The microstructure and mechanical properties of nanocrystalline Pd films prepared by magnetron sputtering have been investigated as a function of strain. The films were deposited onto polyimide substrates and tested in tensile mode. In order to follow the deformation processes in the material, several samples were strained to defined straining states, up to a maximum engineering strain of 10%, and prepared for post-mortem analysis. The nanocrystalline structure was investigated by quantitative automated crystal orientation mapping (ACOM) in a transmission electron microscope (TEM), identifying grain growth and twinning/detwinning resulting from dislocation activity as two of the mechanisms contributing to the macroscopic deformation. Depending on the initial twin density, the samples behaved differently. For low initial twin densities, an increasing twin density was found during straining. On the other hand, starting from a higher twin density, the twins were depleted with increasing strain. The findings from ACOM-TEM were confirmed by results from molecular dynamics (MD) simulations and from conventional and in-situ synchrotron X-ray diffraction (CXRD, SXRD) experiments.

| S-EPMC3817795 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data