Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bilateral alkylamine for suppressing charge recombination and improving stability in blade-coated perovskite solar cells.

ABSTRACT: The power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) are already higher than that of other thin film technologies, but laboratory cell-fabrication methods are not scalable. Here, we report an additive strategy to enhance the efficiency and stability of PSCs made by scalable blading. Blade-coated PSCs incorporating bilateral alkylamine (BAA) additives achieve PCEs of 21.5 (aperture, 0.08 cm²) and 20.0% (aperture, 1.1 cm²), with a record-small open-circuit voltage deficit of 0.35 V under AM1.5G illumination. The stabilized PCE reaches 22.6% under 0.3 sun. Anchoring monolayer bilateral amino groups passivates the defects at the perovskite surface and enhances perovskite stability by exposing the linking hydrophobic alkyl chain. Grain boundaries are reinforced by BAA and are more resistant to mechanical bending and electron beam damage. BAA improves the device shelf lifetime to >1000 hours and operation stability to >500 hours under light, with 90% of the initial efficiency retained.

SUBMITTER: Wu WQ

PROVIDER: S-EPMC6408151 | biostudies-literature | 2019 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Reduced Bimolecular Recombination in Blade-Coated, High-Efficiency, Small-Molecule Solar Cells.

Project description:To realize the full promise of solution deposited photovoltaic devices requires processes compatible with high-speed manufacturing. We report the performance and morphology of blade-coated bulk heterojunction devices based on the small molecule donor p-DTS(FBTTh2)2 when treated with a post-deposition solvent vapor annealing (SVA) process. SVA with tetrahydrofuran improves the device performance of blade-coated films more than solvent additive processing (SA) with 1,8-diiodooctane. In spin-coating, SA and SVA achieve similar device performance. Our optimized, blade coated, SVA devices achieve power conversion efficiencies over 8 % and maintain high efficiencies in films up to ≈ 250 nm thickness, providing valuable resilience to small process variations in high-speed manufacturing. Using impedance spectroscopy, we show that this advantageous behavior originates from highly suppressed bimolecular recombination in the SVA-treated films. Electron microscopy and grazing-incidence X-ray scattering experiments show that SA and SVA both produce highly crystalline donor domains, but SVA films have a radically smaller domain size compared to SA films. We attribute the different behavior to variations in initial nucleation density and relative ability of SVA and SA to control subsequent crystal growth.

| S-EPMC5695694 | biostudies-literature

Charge Injection, Carriers Recombination and HOMO Energy Level Relationship in Perovskite Solar Cells.

Project description:We present a comparative study between a series of well-known semiconductor polymers, used in efficient organic solar cells as hole transport materials (HTM), and the state-of-the art material used as hole transport material in perovskite solar cells: the spiro-OMeTAD. The observed differences in solar cell efficiencies are studied in depth using advanced photoinduced spectroscopic techniques under working illumination conditions. We have observed that there is no correlation between the highest occupied molecular orbital (HOMO) energy levels of the organic semiconductors and the measured open-circuit voltage (VOC). For instance, spiro-OMeTAD and P3HT have a comparable HOMO level of ~5.2?eV vs vacuum even though a difference in VOC of around 200?mV is recorded. This difference is in good agreement with the shift observed for the charge vs voltage measurements. Moreover, hole transfer from the perovskite to the HTM, estimated qualitatively from fluorescence quenching and emission lifetime, seems less efficient for the polymeric HTMs. Finally, the recombination currents from all devices were estimated by using the measured charge (calculated using photoinduced differential charging) and the carriers' lifetime and their value resulted in accordance with the registered short-circuit currents (JSC) at 1 sun.

| S-EPMC5522453 | biostudies-literature

Nonplanar Spray-Coated Perovskite Solar Cells.

Project description:Spray coating is an industrially mature technique used to deposit thin films that combines high throughput with the ability to coat nonplanar surfaces. Here, we explore the use of ultrasonic spray coating to fabricate perovskite solar cells (PSCs) over rigid, nonplanar surfaces without problems caused by solution dewetting and subsequent "run-off". Encouragingly, we find that PSCs can be spray-coated using our processes onto glass substrates held at angles of inclination up to 45° away from the horizontal, with such devices having comparable power conversion efficiencies (up to 18.3%) to those spray-cast onto horizontal substrates. Having established that our process can be used to create PSCs on surfaces that are not horizontal, we fabricate devices over a convex glass substrate, with devices having a maximum power conversion efficiency of 12.5%. To our best knowledge, this study represents the first demonstration of a rigid, curved perovskite solar cell. The integration of perovskite photovoltaics onto curved surfaces will likely find direct applications in the aerospace and automotive sectors.

| S-EPMC9412839 | biostudies-literature

Suppressing non-radiative recombination in metal halide perovskite solar cells by synergistic effect of ferroelasticity.

Project description:The low fraction of non-radiative recombination established the foundation of metal halide perovskite solar cells. However, the origin of low non-radiative recombination in metal halide perovskite materials is still not well-understood. Herein, we find that the non-radiative recombination in twinning-tetragonal phase methylammonium lead halide (MAPbIxCl3-x) is apparently suppressed by applying an electric field, which leads to a remarkable increase of the open-circuit voltage from 1.12 V to 1.26 V. Possible effects of ionic migration and light soaking on the open-circuit voltage enhancement are excluded experimentally by control experiments. Microscopic and macroscopic characterizations reveal an excellent correlation between the ferroelastic lattice deformation and the suppression of non-radiative recombination. The calculation result suggests the existence of lattice polarization in self-stabilizable deformed domain walls, indicating the charge separation that facilitated by lattice polarization is accountable for the suppressed non-radiative recombination. This work provides an understanding of the excellent performance of metal halide perovskite solar cells.

| S-EPMC9845300 | biostudies-literature

Polymer Lewis Base for Improving the Charge Transfer in Tin-Lead Mixed Perovskite Solar Cells.

Project description:The poor film stability of Sn-Pb mixed perovskite film and the mismatched interface energy levels pose significant challenges in enhancing the efficiency of tin-lead (Sn-Pb) mixed perovskite solar cells. In this study, polyvinylpyrrolidone (PVP) is introduced into the PVK perovskite precursor solution, effectively enhancing the overall stability of the film. This improvement is achieved through the formation of robust coordination bonds between the carbonyl (C=O) in the pyrrole ring and the undercoordinated SnII and PbII, thereby facilitating the passivation of defects. Furthermore, the introduction of PVP inhibits the oxidation of tin (Sn), thereby enhancing the n-type characteristics of the perovskite film. This adjustment in the energy level of the PVK perovskite film proves instrumental in reducing interface energy loss, subsequently improving interface charge transfer and mitigating device recombination. Consequently, perovskite solar cells incorporating PVP achieve an outstanding champion power conversion efficiency (PCE) of 21.31%.

| S-EPMC10935037 | biostudies-literature

Modeling of Charge Injection, Recombination, and Diffusion in Complete Perovskite Solar Cells on Short Time Scales

Project description: Not available

| S-EPMC10672245 | biostudies-literature

Fully Spray-Coated Triple-Cation Perovskite Solar Cells.

Project description:We use ultrasonic spray-coating to sequentially deposit thin films of tin oxide, a triple-cation perovskite and spiro-OMeTAD, allowing us fabricate perovskite solar cells (PSCs) with a champion reverse scan power conversion efficiency (PCE) of 19.4% on small-area substrates. We show that the use of spray-deposition permits us to rapidly (>80 mm s-1) coat 25 mm × 75 mm substrates that were divided into a series of devices each with an active area of 15.4 mm2, yielding an average PCE of 10.3% and a peak PCE of 16.3%. By connecting seven 15.4 mm2 devices in parallel on a single substrate, we create a device having an effective active area of 1.08 cm2 and a PCE of 12.7%. This work demonstrates the possibility for spray-coating to fabricate high efficiency and low-cost perovskite solar cells at speed.

| S-EPMC7171188 | biostudies-literature

Trapped charge-driven degradation of perovskite solar cells.

Project description:Perovskite solar cells have shown unprecedent performance increase up to 22% efficiency. However, their photovoltaic performance has shown fast deterioration under light illumination in the presence of humid air even with encapulation. The stability of perovskite materials has been unsolved and its mechanism has been elusive. Here we uncover a mechanism for irreversible degradation of perovskite materials in which trapped charges, regardless of the polarity, play a decisive role. An experimental setup using different polarity ions revealed that the moisture-induced irreversible dissociation of perovskite materials is triggered by charges trapped along grain boundaries. We also identified the synergetic effect of oxygen on the process of moisture-induced degradation. The deprotonation of organic cations by trapped charge-induced local electric field would be attributed to the initiation of irreversible decomposition.

| S-EPMC5110646 | biostudies-literature

Unveiling Excitonic Dynamics in High-Efficiency Nonfullerene Organic Solar Cells to Direct Morphological Optimization for Suppressing Charge Recombination.

Project description:Nonfullerene acceptors (NFAs)-based organic solar cells (OSCs) have recently drawn considerable research interests; however, their excitonic dynamics seems quite different than that of fullerene acceptors-based devices and remains to be largely explored. A random terpolymer of PBBF11 to pair with a paradigm NFA of 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone)-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC) such that both complementary optical absorption and very small offsets of both highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels are acquired is designed and synthesized. Despite the small energy offsets, efficient electron/hole transfer between PBBF11 and ITIC is both clearly observed from steady-state photoluminescence and transient absorption spectra and also supported by the measured low exciton binding energy in ITIC. Consequently, the PBBF11:ITIC-based OSCs afford an encouraging power conversion efficiency (PCE) of 10.02%. Although the good miscibility of PBBF11 and ITIC induces a homogenous blend film morphology, it causes severe charge recombination. The fullerene acceptor of PC71BM with varying loading ratios is therefore added to modulate film morphology to effectively reduce the charge recombination. As a result, the optimal OSCs based on PBBF11:ITIC:PC71BM yield a better PCE of 11.4% without any additive or annealing treatment.

| S-EPMC6468965 | biostudies-literature

Unveiling Charge Carrier Recombination, Extraction, and Hot-Carrier Dynamics in Indium Incorporated Highly Efficient and Stable Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) have been propelled into the limelight over the past decade due to the rapid-growing power conversion efficiency (PCE). However, the internal defects and the interfacial energy level mismatch are detrimental to the device performance and stability. In this study, it is demonstrated that a small amount of indium (In3+ ) ions in mixed cation and halide perovskites can effectively passivate the defects, improve the energy-level alignment, and reduce the exciton binding energy. Additionally, it is confirmed that In3+ ions can significantly elevate the initial carrier temperature, slow down the hot-carrier cooling rate, and reduce the heat loss before carrier extraction. The device with 1.5% of incorporated In3+ achieves a PCE of 22.4% with a negligible hysteresis, which is significantly higher than that of undoped PSCs (20.3%). In addition, the unencapsulated PSCs achieve long-term stability, which retain 85% of the original PCE after 3,000 h of aging in dry air. The obtained results demonstrate and promote the development of practical, highly efficient, and stable hot-carrier-enhanced PSCs.

| S-EPMC9008790 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data