Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

WO₃/BiVO₄: impact of charge separation at the timescale of water oxidation.

ABSTRACT: The four hole oxidation of water has long been considered the kinetic bottleneck for overall solar-driven water splitting, and thus requires the formation of long-lived photogenerated holes to overcome this kinetic barrier. However, photogenerated charges are prone to recombination unless they can be spatially separated. This can be achieved by coupling materials with staggered conduction and valence band positions, providing a thermodynamic driving force for charge separation. This has most aptly been demonstrated in the WO₃/BiVO₄ junction, in which quantum efficiencies for the water oxidation reaction can approach near unity. However, the charge carrier dynamics in this system remain elusive over timescales relevant to water oxidation (μs-s). In this work, the effect of charge separation on carrier lifetime, and the voltage dependence of this process, is probed using transient absorption spectroscopy and transient photocurrent measurements, revealing sub-μs electron transfer from BiVO₄ to WO₃. The interface formed between BiVO₄ and WO₃ is shown to overcome the "dead-layer effect" encountered in BiVO₄ alone. Moreover, our study sheds light on the role of the WO₃/BiVO₄ junction in enhancing the efficiency of the water oxidation reaction, where charge separation across the WO₃/BiVO₄ junction improves both the yield and lifetime of holes present in the BiVO₄ layer over timescales relevant to water oxidation.

SUBMITTER: Selim S

PROVIDER: S-EPMC6419945 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Improved Charge Separation in WO?/CuWO? Composite Photoanodes for Photoelectrochemical Water Oxidation.

Project description:Porous tungsten oxide/copper tungstate (WO?/CuWO?) composite thin films were fabricated via a facile in situ conversion method, with a polymer templating strategy. Copper nitrate (Cu(NO?)?) solution with the copolymer surfactant Pluronic®F-127 (Sigma-Aldrich, St. Louis, MO, USA, generic name, poloxamer 407) was loaded onto WO? substrates by programmed dip coating, followed by heat treatment in air at 550 °C. The Cu2+ reacted with the WO? substrate to form the CuWO? compound. The composite WO?/CuWO? thin films demonstrated improved photoelectrochemical (PEC) performance over WO? and CuWO? single phase photoanodes. The factors of light absorption and charge separation efficiency of the composite and two single phase films were investigated to understand the reasons for the PEC enhancement of WO?/CuWO? composite thin films. The photocurrent was generated from water splitting as confirmed by hydrogen and oxygen gas evolution, and Faradic efficiency was calculated based on the amount of H? produced. This work provides a low-cost and controllable method to prepare WO?-metal tungstate composite thin films, and also helps to deepen the understanding of charge transfer in WO?/CuWO? heterojunction.

| S-EPMC5503067 | biostudies-literature

WO3/BiVO4 Photoanodes: Facets Matching at the Heterojunction and BiVO4 Layer Thickness Effects.

Project description:Photoelectrochemical solar energy conversion offers a way to directly store light into energy-rich chemicals. Photoanodes based on the WO3/BiVO4 heterojunction are most effective mainly thanks to the efficient separation of photogenerated charges. The WO3/BiVO4 interfacial space region in the heterojunction is investigated here with the increasing thickness of the BiVO4 layer over a WO3 scaffold. On the basis of X-ray diffraction analysis results, density functional theory simulations show a BiVO4 growth over the WO3 layer along the BiVO4 {010} face, driven by the formation of a stable interface with new covalent bonds, with a favorable band alignment and band bending between the two oxides. This crystal facet phase matching allows a smooth transition between the electronic states of the two oxides and may be a key factor ensuring the high efficiency attained with this heterojunction. The photoelectrochemical activity of the WO3/BiVO4 photoanodes depends on both the irradiation wavelength and the thickness of the visible-light-absorbing BiVO4 layer, a 75 nm thick BiVO4 layer on WO3 being best performing.

| S-EPMC8414527 | biostudies-literature

WO3 in suit embed into MIL-101 for enhancement charge carrier separation of photocatalyst.

Project description:Compositing nanoparticles photo-catalyst with enormous surface areas metal-organic framework (MOF) will greatly improve photocatalytic performances. Herein, WO3 nanoparticles are partly embedded into pores of MIL-101 or only supported on the outside of representative MIL-101, which were defined as embedded structure WO3@MIL-101@WO3 and coating structure WO3&MIL-101 respectively. Different pH, concentration and loading percentage were researched. XRD, TEM and BET were carried to analyze the composites. Compared with the pristine WO3, all WO3 loaded MOF nanocomposites exhibited remarkable enhancing for the efficiency of photocatalytic degradation methylene blue under visible light. Their activity of the same loading percentage WO3 in embedded structure and coating structure have increased for 9 and 3 times respectively compared with pure WO3. The WO3@MIL-101@WO3 has 3 times higher efficiency than WO3&MIL-101, because the shorter electron-transport distance can make a contribution to electron-hole separation. The further mechanism involved has been investigated by radical quantify experiment, XPS and photoluminescence spectroscopy.

| S-EPMC6425017 | biostudies-literature

Water oxidation kinetics of nanoporous BiVO4 photoanodes functionalised with nickel/iron oxyhydroxide electrocatalysts.

Project description:In this work, spectroelectrochemical techniques are employed to analyse the catalytic water oxidation performance of a series of three nickel/iron oxyhydroxide electrocatalysts deposited on FTO and BiVO4, at neutral pH. Similar electrochemical water oxidation performance is observed for each of the FeOOH, Ni(Fe)OOH and FeOOHNiOOH electrocatalysts studied, which is found to result from a balance between degree of charge accumulation and rate of water oxidation. Once added onto BiVO4 photoanodes, a large enhancement in the water oxidation photoelectrochemical performance is observed in comparison to the un-modified BiVO4. To understand the origin of this enhancement, the films were evaluated through time-resolved optical spectroscopic techniques, allowing comparisons between electrochemical and photoelectrochemical water oxidation. For all three catalysts, fast hole transfer from BiVO4 to the catalyst is observed in the transient absorption data. Using operando photoinduced absorption measurements, we find that water oxidation is driven by oxidised states within the catalyst layer, following hole transfer from BiVO4. This charge transfer is correlated with a suppression of recombination losses which result in remarkably enhanced water oxidation performance relative to un-modified BiVO4. Moreover, despite similar electrocatalytic behaviour of all three electrocatalysts, we show that variations in water oxidation performance observed among the BiVO4/MOOH photoanodes stem from differences in photoelectrochemical and electrochemical charge accumulation in the catalyst layers. Under illumination, the amount of accumulated charge in the catalyst is driven by the injection of photogenerated holes from BiVO4, which is further affected by the recombination loss at the BiVO4/MOOH interface, and thus leads to deviations from their behaviour as standalone electrocatalysts.

| S-EPMC8171343 | biostudies-literature

End-On Bound Iridium Dinuclear Heterogeneous Catalysts on WO3 for Solar Water Oxidation.

Project description:Heterogeneous catalysts with atomically defined active centers hold great promise for high-performance applications. Among them, catalysts featuring active moieties with more than one metal atom are important for chemical reactions that require synergistic effects but are rarer than single atom catalysts (SACs). The difficulty in synthesizing such catalysts has been a key challenge. Recent progress in preparing dinuclear heterogeneous catalysts (DHCs) from homogeneous molecular precursors has provided an effective route to address this challenge. Nevertheless, only side-on bound DHCs, where both metal atoms are affixed to the supporting substrate, have been reported. The competing end-on binding mode, where only one metal atom is attached to the substrate and the other metal atom is dangling, has been missing. Here, we report the first observation that end-on binding is indeed possible for Ir DHCs supported on WO3. Unambiguous evidence supporting the binding mode was obtained by in situ diffuse reflectance infrared Fourier transform spectroscopy and high-angle annular dark-field scanning transmission electron microscopy. Density functional theory calculations provide additional support for the binding mode, as well as insights into how end-on bound DHCs may be beneficial for solar water oxidation reactions. The results have important implications for future studies of highly effective heterogeneous catalysts for complex chemical reactions.

| S-EPMC6161057 | biostudies-literature

Photocatalytic generation of hydrogen by core-shell WO?/BiVO? nanorods with ultimate water splitting efficiency.

Project description:Efficient photocatalytic water splitting requires effective generation, separation and transfer of photo-induced charge carriers that can hardly be achieved simultaneously in a single material. Here we show that the effectiveness of each process can be separately maximized in a nanostructured heterojunction with extremely thin absorber layer. We demonstrate this concept on WO3/BiVO4+CoPi core-shell nanostructured photoanode that achieves near theoretical water splitting efficiency. BiVO4 is characterized by a high recombination rate of photogenerated carriers that have much shorter diffusion length than the thickness required for sufficient light absorption. This issue can be resolved by the combination of BiVO4 with more conductive WO3 nanorods in a form of core-shell heterojunction, where the BiVO4 absorber layer is thinner than the carrier diffusion length while it's optical thickness is reestablished by light trapping in high aspect ratio nanostructures. Our photoanode demonstrates ultimate water splitting photocurrent of 6.72?mA?cm(-2) under 1 sun illumination at 1.23?V(RHE) that corresponds to ~90% of the theoretically possible value for BiVO4. We also demonstrate a self-biased operation of the photoanode in tandem with a double-junction GaAs/InGaAsP photovoltaic cell with stable water splitting photocurrent of 6.56?mA?cm(-2) that corresponds to the solar to hydrogen generation efficiency of 8.1%.

| S-EPMC4459147 | biostudies-literature

Determining the role of oxygen vacancies in the photoelectrocatalytic performance of WO3 for water oxidation.

Project description:Oxygen vacancies are common to most metal oxides, whether intentionally incorporated or otherwise, and the study of these defects is of increasing interest for solar water splitting. In this work, we examine nanostructured WO3 photoanodes of varying oxygen content to determine how the concentration of bulk oxygen-vacancy states affects the photocatalytic performance for water oxidation. Using transient optical spectroscopy, we follow the charge carrier recombination kinetics in these samples, from picoseconds to seconds, and examine how differing oxygen vacancy concentrations impact upon these kinetics. We find that samples with an intermediate concentration of vacancies (∼2% of oxygen atoms) afford the greatest photoinduced charge carrier densities, and the slowest recombination kinetics across all timescales studied. This increased yield of photogenerated charges correlates with improved photocurrent densities under simulated sunlight, with both greater and lesser oxygen vacancy concentrations resulting in enhanced recombination losses and poorer J-V performances. Our conclusion, that an optimal - neither too high nor too low - concentration of oxygen vacancies is required for optimum photoelectrochemical performance, is discussed in terms of the competing beneficial and detrimental impact these defects have on charge separation and transport, as well as the implications held for other highly doped materials for photoelectrochemical water oxidation.

| S-EPMC8157495 | biostudies-literature

Photocatalytic primary alcohol oxidation on WO3 nanoplatelets.

Project description:With the aid of direct heating through microwave irradiation in non-aqueous media, nanocrystalline tungsten(vi) oxide is achievable in 30 minutes at 200 °C, faster and at a lower temperature than conventional synthesis methods. Forming in a platelet morphology, these particles are as small as 20 nm with a BET surface area of 37 m2 g-1 WO3. These nanoplatelets are active for the photocatalytic oxidation of the 1° alcohols benzyl alcohol (rate constant, k of 2.6 × 10-3 h-1) and 5-(hydroxymethyl)-2-furfural (k of 0.01 h-1) using 10 mg of WO3 with 2 mL of 0.250 M substrate in acetonitrile and a 150 mW cm-2 460 nm blue LED source. As expected, these rate constants are larger than those observed for commercially prepared, micron-sized WO3. XPS analysis shows that during catalysis, the concentration of W5+ on the surface increases, but the nanoplatelets are stable under these reaction conditions. The overall morphology and size of the particles are retained through the reactions. Moreover, the nanoplatelets are recyclable-showing no loss in activity for four reaction cycles.

| S-EPMC9071196 | biostudies-literature

Synergistic Effect of Porosity and Gradient Doping in Efficient Solar Water Oxidation of Catalyst-Free Gradient Mo:BiVO4.

Project description:In this paper, the synergistic effect of porosity and gradient of Mo doping in BiVO4 photoanodes for improving charge separation and solar water oxidation performance is reported. A simple solution-based, three-step fabrication route was adopted using a layer-by-layer assembling technique. A water oxidation photocurrent of ∼1.73 mA cm-2 at 1.23 V vs reversible hydrogen electrode in neutral pH was achieved without using any sacrificial agent or electrocatalyst. The gradient Mo doping was found to enhance charge separation efficiency, which was verified through a shift in the water oxidation onset potential cathodically to ∼200 mV. In addition, these results were further confirmed by a higher open-circuit photovoltage and flat band potential investigations. This was attributed to the surface energetics played by gradient Mo doping that served as the driving force in reducing the onset potential for water oxidation. The coupled effect of enhanced light absorption and charge separation was revealed by monitoring the difference in decoupling the water oxidation efficiencies of porous and planar Mo:BiVO4 photoanodes. This study demonstrated an improvement in the catalytic and charge separation efficiency of Mo:BiVO4 photoanodes due to the introduction of porous structured homojunctions in a gradient manner. The simple synthesis approach adopted in the present study can be utilized and scaled up in making efficient photoanodes for competent solar water oxidation cells.

| S-EPMC6641386 | biostudies-literature

Significant Impact of Exposed Facets on the BiVO4 Material Performance for Photocatalytic Water Splitting Reactions.

Project description:The impact of the four predominant (010), (110), (001), and (121) exposed facets obtained experimentally for monoclinic BiVO4 on its photocatalytic performance for water splitting reactions is investigated on the basis of the hybrid density functional theory including the spin-orbit coupling. Although their electronic structure is similar, their transport and redox properties reveal anisotropic characters based on the crystal orientation and termination. The particular role of each facet in proton reduction was correlated with the surface Bi coordination number and their geometrical distribution. Our work predicts the (001) facet as the only good candidate for both HER and OER, while the (010) facet is a fitting candidate for OER only. The (110) and (121) surfaces are acceptable candidates only for OER but less potential than (001) and (010). These outcomes will efficiently conduct experimentalists for an attentive design of facet-oriented BiVO4 samples toward improving water oxidation and proton reduction.

| S-EPMC7467742 | biostudies-literature