Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Homo- and Copolymerizations of Ethylene and Norbornene Using Bis(?-ketoamino) Titanium Catalysts Containing Pyrazolone Rings.

ABSTRACT: A series of bis(?-ketoamino) titanium complexes containing pyrazolone rings (1?3) have been synthesized, characterized, and used as precursors for homo- and copolymerization of ethylene and norbornene. The titanium complexes activated with methylaluminoxane (MAO) exhibited good activities for homopolymerization of ethylene (E) to produce linear polyethylenes (PEs). Ethylene?norbornene copolymers (E?N) were also prepared by these catalysts with moderate activities, and influences of ligand substituents and norbornene addition on copolymer microstructure were studied in detail. Microstructure analysis of the E?N copolymers by ¹³C NMR and differential scanning calorimetry (DSC) techniques showed that alternating (ENEN) and isolated (ENEE) norbornene predominately appeared in the copolymer chain, and the NN dyad and NNN triad sequences were also present in the copolymers obtained by the less bulky catalyst 1.

SUBMITTER: Pei L

PROVIDER: S-EPMC6432339 | biostudies-literature | 2017 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Homo- and Copolymerizations of Ethylene and Norbornene Using Bis(β-ketoamino) Titanium Catalysts Containing Pyrazolone Rings.

Pei Lixia L He San S Gao Jie J Liao Heng H Gao Haiyang H

Polymers 20170630 7

A series of bis(β-ketoamino) titanium complexes containing pyrazolone rings (1⁻3) have been synthesized, characterized, and used as precursors for homo- and copolymerization of ethylene and norbornene. The titanium complexes activated with methylaluminoxane (MAO) exhibited good activities for homopolymerization of ethylene (E) to produce linear polyethylenes (PEs). Ethylene⁻norbornene copolymers (E⁻N) were also prepared by these catalysts with moderate activities, and influences of ...[more]

PMID: 30970937

Similar Datasets

Homo- and Copolymerization of Ethylene with Norbornene Catalyzed by Vanadium(III) Phosphine Complexes.

Project description:Herein, we report the homo- and co-polymerization of ethylene (E) with norbornene (NB) catalyzed by vanadium(III) phosphine complexes of the type VCl3(PMenPh3-n)2 [n = 2 (1a), 1 (1b)] and VCl3(PR3)2 [R = phenyl (Ph, 1c), cyclohexyl (Cy, 1d), tert-butyl (tBu, 1e)]. In the presence of Et2AlCl and Cl3CCOOEt (ETA), 1a-1e exhibit good activities for the polymerization of ethylene, affording linear, semicrystalline PEs with a melting temperature of approximately 130 °C. Mainly alternating copolymers with high comonomer incorporation were obtained in the E/NB copolymerization. A relationship was found between the electronic and steric properties of the phosphine ligands and the catalytic performance. Overall, the presence of electron-withdrawing ligand substituents increases the productivity, complexes with aryl phosphine (weaker σ-donor character) exhibiting a higher (co)polymerization initiation rate than those with alkyl phosphines (stronger σ-donor character). Steric effects also seem to play a key role since 1d and 1e, having large size phosphines (PCy3 θ = 170° and PtBu3 θ = 182°, respectively) are more active than 1a (PMe2Ph θ = 122°). In this case, the larger size of PtBu3 and PCy3 likely compensates for their higher donor strength compared to PMe2Ph.

| S-EPMC6600629 | biostudies-literature

Structural and Thermal Properties of Ethylene-Norbornene Copolymers Obtained Using Vanadium Homogeneous and SIL Catalysts.

Project description:The series of ethylene-norbornene (E-NB) copolymers was obtained using different vanadium homogeneous and supported ionic liquid (SIL) catalyst systems. The 13C and 1H NMR (carbon and proton nuclear magnetic resonance spectroscopy) together with differential scanning calorimetry (DSC) were applied to determine the composition of copolymers such as comonomer incorporation (CNB), monomer dispersity (MD), monomer reactivity ratio (re), sequence length of ethylene (le) and tetrad microblock distributions. The relation between the type of catalyst, reaction conditions and on the other hand, the copolymer microstructure, chain termination reaction analyzed by the type of unsaturation are discussed. In addition, the thermal properties of E-NB copolymers such as the melting and crystallization behavior, like also the heterogeneity of composition described by successive the self-nucleation and annealing (SSA) and the dispersity index (DI) were determined.

| S-EPMC7690451 | biostudies-literature

Elastomeric Compositions of Ethylene-Norbornene Copolymer Containing Biofillers Based on Coffee and Tea Waste.

Project description:The development of eco-friendly elastomeric materials has become an important issue in recent years. In this work, thermoplastic elastomer samples of an ethylene-norbornene copolymer (EN) with coffee and tea biofillers mixed with typical fillers such as montmorillonite (MMT), silica (SiO2), and cellulose were investigated. The aim of this research was to determine the effect of fillers on the properties of the materials and to assess their degradability after two ultraviolet (UV) aging cycles (200, 400 h). The scientific novelty of this work is the assessment of the anti-aging effect of simultaneous biofillers-stabilizers based on coffee and tea waste. The surfaces of the obtained polymer compositions were examined using infrared spectroscopy (FTIR-ATR). Contact angles were determined, and surface energy was calculated. The mechanical properties were tested, and the influence of plant fillers and aging on the color change in the materials was analyzed. The combination of coffee with silica, MMT, and cellulose fillers limited the migration of fatty acids and other compounds from the biofiller to the EN surface (FTIR analysis). Based on the aging coefficients K, it was shown that all coffee- and tea-based fillers stabilized the polymer compositions during UV aging (400 h). The results allowed the authors to determine the importance and impact of waste plant fillers on the degradability of the synthetic EN.

| S-EPMC11356043 | biostudies-literature

Titanium-Catalyzed Hydroaminoalkylation of Ethylene.

Project description:The first examples of titanium-catalyzed hydroaminoalkylation reactions of ethylene with secondary amines are presented. The reactions can be achieved with various titanium catalysts and they do not require the use of high pressure equipment. In addition, the first solid-state structure of a titanapyrrolidine that is formed by insertion of an alkene into the Ti-C bond of a titanaaziridine is reported.

| S-EPMC7064915 | biostudies-literature

New Titanium(IV)-Alkoxide Complexes Bearing Bidentate OO Ligand with the Camphyl Linker as Catalysts for High-Temperature Ethylene Polymerization and Ethylene/1-Octene Copolymerization.

Project description:In order to increase the thermal stability of olefin polymerization precatalysts, new titanium(IV) complexes with diolate ligands differing in the degree of steric hindrances were synthesized from readily available precursor (±)camphor. The structures of the complexes 1-2 were established by X-ray diffraction. Complexes 1-4 in the presence of an activator {EtnAlCl3-n + Bu2Mg} catalyzed the synthesis of UHMWPE with an Mv up to 10 million and a productivity of up to 3300 kg/molTi·atm·h. The obtained polymers are obviously characterized by a low density of macromolecular entanglement, which makes it possible to use the solid-phase method for their processing. The mechanical characteristics of the oriented UHMWPE films had a breaking strength up to 2.7 GPa and an elastic modulus of up to 151 GPa. The precatalysts 1-4 were also active in ethylene/1-octene copolymerization. The comonomer content was in the range of 1.4-4.6 mol%. The use of a rigid linker and an increase in the steric load of the diolate complexes ensured the thermal stability of the catalytic system in the range of 50-70 °C.

| S-EPMC9658800 | biostudies-literature

Heterodinuclear zinc and magnesium catalysts for epoxide/CO2 ring opening copolymerizations.

Project description:The ring-opening copolymerization of carbon dioxide and epoxides is a useful means to make aliphatic polycarbonates and to add-value to CO2. Recently, the first heterodinuclear Zn(ii)/Mg(ii) catalyst showed greater activity than either homodinuclear analogue (J. Am. Chem. Soc. 2015, 137, 15078-15081). Building from this preliminary finding, here, eight new Zn(ii)/Mg(ii) heterodinuclear catalysts featuring carboxylate co-ligands are prepared and characterized. The best catalysts show very high activities for copolymerization using cyclohexene oxide (TOF = 8880 h-1, 20 bar CO2, 120 °C, 0.01 mol% catalyst loading) or cyclopentene oxide. All the catalysts are highly active in the low pressure regime and specifically at 1 bar pressure CO2. The polymerization kinetics are analysed using in situ spectroscopy and aliquot techniques: the rate law is overall second order with a first order dependence in both catalyst and epoxide concentrations and a zero order in carbon dioxide pressure. The pseudo first order rate coefficient values are compared for the catalyst series and differences are primarily attributed to effects on initiation rates. The data are consistent with a chain shuttling mechanistic hypothesis with heterodinuclear complexes showing particular rate enhancements by optimizing distinct roles in the catalytic cycles. The mechanistic hypothesis should underpin future heterodinuclear catalyst design for use both in other (co)polymerization and carbon dioxide utilization reactions.

| S-EPMC6492632 | biostudies-literature

Terpolymerization of Substituted Cycloolefin with Ethylene and Norbornene by Transition Metal Catalyst.

Project description:Ethylene-norbornene terpolymerization experiments using 5-alkyl-substituted norbornenes (5-pentyl-2-norbornene (C₅N) and 5-octyl-2-norbornene (C₈N)) or dicyclopentadiene (DCPD) were conducted with two ansa-metallocenes, [Zr{(η⁵-C₉H₆)₂C₂H₄}Cl2] (1) and [Zr{(η⁵-2,5-Me₂C₅H₂)₂CHEt}Cl₂] (2), activated by methylaluminoxane (MAO). The terpolymers obtained were investigated in detail by determining the microstructure and termonomer contents by 13C NMR, molar masses and thermal properties. Results were compared to those of ethylene (E)-norbornene (N) terpolymerizations with 1-octene. 2, with lower steric hindrance and a shorter bridge, gave the best activities, termonomer incorporation and molar masses. The size of the substituent in 5-alkyl substituted norbornene also plays a role. C₈N gives the highest activities and molar masses, while DCPD terpolymers have the highest cycloolefin content. Terpolymers are random; their molar masses, much higher than those in 1-octene terpolymers, are in a range useful for industrial applications. Finally, Tg values up to 152 °C were obtained. For similar N content, poly(E-ter-N-ter-C₈N)s and poly(E-ter-N-ter-DCPD)s have the lowest and the highest Tg values, respectively. Thus, the presence of an eight-carbon atom pendant chain in C₈N increases the flexibility of the polymer chain more than a five-carbon atom pendant chain in C₅N. The higher rigidity of C₅N may lead to lower activities and to increasing probability of σ-bond metathesis and chain termination, as evidenced by chain-end group analysis.

| S-EPMC6432560 | biostudies-literature

Investigation of Ternary Mixtures Containing 1-Ethyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)azanide, Ethylene Carbonate and Lithium Bis(trifluoromethanesulfonyl)azanide.

Project description:Temperature-dependent viscosity, conductivity and density data of ternary mixtures containing 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)azanide (EMIM-TFSA), ethylene carbonate (EC), and lithium bis(trifluoromethanesulfonyl)azanide (Li-TFSA) were determined at atmospheric pressure in the temperature range of 20 to 80 °C. Differential scanning calorimetry (DSC) measurements were performed to characterize phase conditions of the mixtures in a temperature range of -120 to +100 °C. The viscosity data were fitted according to the Vogel-Fulcher-Tammann-Hesse (VFTH) equation and analyzed with the help of the fractional Walden rule. In this study, fundamental physicochemical data about the mixtures are provided and discussed as a basis for structure-property relationship calculations and for potential use of those mixtures as electrolytes for various applications.

| S-EPMC4881496 | biostudies-literature

Improved Aging Stability of Ethylene-Norbornene Composites Filled with Lawsone-Based Hybrid Pigment.

Project description:In this study, we produced a new organic-inorganic hybrid pigment based on a natural chromophore. Lawsone was selected as the active organic compound and incorporated into aluminum-magnesium hydroxycarbonate (LH). The hydroxynaphthoquinone derivative lawsone (Lawsonia inermis L.) is a naturally occurring dye, which is commonly used as a colorant because of its nontoxicity and biological functions. The structure and stability of the hybrid colorant were investigated using 27-Al solid-state nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD), secondary ion mass spectrometry (TOF-SIMS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and UV-Vis spectroscopy. TOF-SIMS and 27Al NMR spectroscopy revealed interactions between the dye molecules and metal ions present in the LH host, confirming successful formation of an LH-based hybrid (LH/lawsone). In the next part of the study, we examined the effect of the hybrid pigment on the mechanical and thermal properties of ethylene-norbornene (EN) materials, as well as the aging resistance of the colored composites to irradiation across the full solar spectrum. Dynamic mechanical analysis (DMA) and the results of tensile break tests revealed that the EN+LH/lawsone composite had significantly better resistance to solar irradiation in comparison to EN and EN with an unmodified carrier.

| S-EPMC6523681 | biostudies-literature

Study of Heterogeneity of Ethylene/1-Octene Copolymers Synthesized with Zirconium and Titanium Complexes Bearing Diamine-bis(phenolate) Ligands.

Project description:A series of ethylene/1-octene copolymers synthesized with diamine-bis(phenolate) complexes activated with Al(iBu)3/[Ph3C][B(C6F5)4] were subjected to preparative temperature rising elution fractionation (TREF). The complexes used differed in the type of metallic center (Zr or Ti) or the amine donor in the pendant arm of the ligand (NMe2 or NiPr2). The obtained fractions were then characterized via FTIR, DSC and GPC methods. It was found that all the copolymers had very broad chemical composition distributions, and the most heterogeneous was the copolymer produced by the titanium complex bearing a ligand with the NiPr2 donor group. The difference in the comonomer incorporation into the macromolecules of the fractions was as high as 8.3 mol%. The melting temperature and molecular weight of the fractions changed nearly linearly with the increased elution temperature. Copolymers produced by zirconium catalysts were also fractionated by molecular weight using the solvent/non-solvent technique with subsequent analysis of the fractions. It was shown that the fractions have a similar composition, low molecular weight distribution and very broad comonomer distribution. Therefore, the comonomer content in the fractions was not a function of the molecular weight as was observed for the copolymers synthesized with the Ziegler-Natta catalysts.

| S-EPMC10857099 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data