Browse
Submit Data
Databases
API
Help

Dataset Information

11 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Two Experimental Protocols for Accurate Measurement of Gas Component Uptake and Production Rates in Bioconversion Processes.

ABSTRACT: Bioconversion processes offer many economic, environmental, and societal advantages for production of fuels and chemicals. Successful commercialization of any biotechnology usually requires accurate characterization of cell growth dynamics, substrate conversion and production excretion rates. Despite recent advancements in analytical equipment, obtaining accurate measurement of gas component uptake or production rates remains challenging due to their high sensitivity to system pressure or volume changes. Specifically, the consumption and production of various gases will result in changes in system pressure (for batch operations) or off-gas flow rate (for continuous operations). These changes would cause significant errors in the estimated gas component uptake and production rates if they were not accounted for. In this work, we propose two easy-to-implement experimental protocols and associated calculation procedures to obtain accurate measurements of gas component consumption and production rates; one is for batch operation and one is for continuous operation. For depressurized (i.e., system pressure below 1 atm) batch cultures, nitrogen (or other inert gases) is used to repressurize the system to 1 atm before taking sample; while for continuous cultures, He (or other inert gases) is used as an internal tracer to accurately measure off-gas flow rate. The effectiveness and accuracy of the two protocols and associated calculation procedures are demonstrated using several case studies with both abiotic and biotic systems.

SUBMITTER: Stone KA

PROVIDER: S-EPMC6459910 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Accurate Measurement of Defect Generation Rates in Silicon Carbide Irradiated with Energetic Ions.

Project description:In this work, we obtained the Si vacancy generation rates η in SiC nanowire samples irradiated with 1, 3 MeV protons, and 2.8 MeV helium ions using the electrical resistivity measurement, which further indicated an intuitive linear function correlation between η and the nuclear stopping power of the incident ions at a low dpa level with a coefficient of 2.15 × 10-3 eV-1. Prediction through this correlation is consistent with previous work. Besides, the measured value is about 1/2 of the simulation results with the popular SRIM code. Overall, our work provides a feasible way to get the generation rate of a certain irradiation-induced defect by electric measurements, and the correlation obtained is practically useful in various applications.

| S-EPMC10633851 | biostudies-literature

Convenient, rapid and accurate measurement of SVOC emission characteristics in experimental chambers.

Project description:Chamber tests are usually used to determine the source characteristics of semi-volatile organic compounds (SVOCs) which are critical to quantify indoor exposure to SVOCs. In contrast to volatile organic compounds (VOCs), the sorption effect of SVOCs to chamber surfaces usually needs to be considered due to the much higher surface/air partition coefficients, resulting in a long time to reach steady state, frequently on the order of months, and complicating the mathematical analysis of the resulting data. A chamber test is also complicated if the material-phase concentration is not constant. This study shows how to design a chamber to overcome these limitations. A dimensionless mass transfer analysis is used to specify conditions for (1) neglecting the SVOC sorption effect to chamber surfaces, (2) neglecting the convective mass transfer resistance at sorption surfaces if the sorption effect cannot be neglected, and (3) regarding the material-phase concentration in the source as constant. Several practical and quantifiable ways to improve chamber design are proposed. The approach is illustrated by analyzing available data from three different chambers in terms of the accuracy with which the model parameters can be determined and the time needed to conduct the chamber test. The results should greatly facilitate the design of chambers to characterize SVOC emissions and the resulting exposure.

| S-EPMC3756072 | biostudies-literature

Force-dependent hopping rates of RNA hairpins can be estimated from accurate measurement of the folding landscapes.

Project description:The sequence-dependent folding landscapes of nucleic acid hairpins reflect much of the complexity of biomolecular folding. Folding trajectories, generated by using single-molecule force-clamp experiments by attaching semiflexible polymers to the ends of hairpins, have been used to infer their folding landscapes. Using simulations and theory, we study the effect of the dynamics of the attached handles on the handle-free RNA free-energy profile F(o)(eq)(z(m)), where z(m) is the molecular extension of the hairpin. Accurate measurements of F(o)(eq)(z(m)) requires stiff polymers with small L/l(p), where L is the contour length of the handle, and l(p) is the persistence length. Paradoxically, reliable estimates of the hopping rates can only be made by using flexible handles. Nevertheless, we show that the equilibrium free-energy profile F(o)(eq)(z(m)) at an external tension f(m), the force (f) at which the folded and unfolded states are equally populated, in conjunction with Kramers' theory, can provide accurate estimates of the force-dependent hopping rates in the absence of handles at arbitrary values of f. Our theoretical framework shows that z(m) is a good reaction coordinate for nucleic acid hairpins under tension.

| S-EPMC2474478 | biostudies-literature

Greenhouse gas growth rates.

Project description:We posit that feasible reversal of the growth of atmospheric CH(4) and other trace gases would provide a vital contribution toward averting dangerous anthropogenic interference with global climate. Such trace gas reductions may allow stabilization of atmospheric CO(2) at an achievable level of anthropogenic CO(2) emissions, even if the added global warming constituting dangerous anthropogenic interference is as small as 1 degrees C. A 1 degrees C limit on global warming, with canonical climate sensitivity, requires peak CO(2) approximately 440 ppm if further non-CO(2) forcing is +0.5 W/m(2), but peak CO(2) approximately 520 ppm if further non-CO(2) forcing is -0.5 W/m(2). The practical result is that a decline of non-CO(2) forcings allows climate forcing to be stabilized with a significantly higher transient level of CO(2) emissions. Increased "natural" emissions of CO(2), N(2)O, and CH(4) are expected in response to global warming. These emissions, an indirect effect of all climate forcings, are small compared with human-made climate forcing and occur on a time scale of a few centuries, but they tend to aggravate the task of stabilizing atmospheric composition.

| S-EPMC526279 | biostudies-literature

Measurement of temperature affects on Arabidopsis transcription and decay rates

2013-12-07 | GSE53071 | GEO

Systems biology and metabolic engineering of Rhodococcus for bioconversion and biosynthesis processes.

Project description:Rhodococcus spp. strains are widespread in diverse natural and anthropized environments thanks to their high metabolic versatility, biodegradation activities, and unique adaptation capacities to several stress conditions such as the presence of toxic compounds and environmental fluctuations. Additionally, the capability of Rhodococcus spp. strains to produce high value-added products has received considerable attention, mostly in relation to lipid accumulation. In relation with this, several works carried out omic studies and genome comparative analyses to investigate the genetic and genomic basis of these anabolic capacities, frequently in association with the bioconversion of renewable resources and low-cost substrates into triacylglycerols. This review is focused on these omic analyses and the genetic and metabolic approaches used to improve the biosynthetic and bioconversion performance of Rhodococcus. In particular, this review summarizes the works that applied heterologous expression of specific genes and adaptive laboratory evolution approaches to manipulate anabolic performance. Furthermore, recent molecular toolkits for targeted genome editing as well as genome-based metabolic models are described here as novel and promising strategies for genome-scaled rational design of Rhodococcus cells for efficient biosynthetic processes application.

| S-EPMC8449775 | biostudies-literature

Measurement and Analysis of Gas Composition in Digestive Tract

Project description:The purpose of this study is to detect the concentration of various gases，including hydrogen, methane, hydrogen sulfide, nitric oxide in different parts of the digestive tract by a safe and direct method, and to establish a human digestive tract gas profiles. Analyze the differences in gas components in different segments of the digestive tract in patients with different diseases, and analyze the correlation between specific gases and digestive tract diseases and non-specific symptoms.

| 14702 | ecrin-mdr-crc

Measurement of temperature affects on Arabidopsis transcription and decay rates

Project description:The goal of this study is to measure Arabidopsis mRNA transcription and mRNA decay rates genome wide at two temperatures, and thus to calculate the temperature coefficient of both processes. Sensing and response to ambient temperature is important for controlling growth and development of many organisms, in part by regulating mRNA levels. mRNA abundance can change with temperature, but it is unclear whether this results from changes to transcription or decay rates and whether passive or active temperature regulation is involved. Results Using a base analogue labelling method we directly measured the temperature coefficient (Q10) of mRNA synthesis and degradation rates of the Arabidopsis transcriptome. We show that for most genes transcript levels are buffered against passive increases in transcription rates by balancing passive increases in the rate of decay. Strikingly, for temperature-responsive transcripts, increasing temperature raises transcript abundance primarily by promoting faster transcription relative to decay and not vice versa, suggesting a global transcriptional mechanism process exists for the activethat controls of mRNA abundance by temperature/ The design of this expreiment is thus: at time zero (dawn) 3 biological replicate samples were harvested, and then the base analogue 4-thiouracil (4SU) was added to three remaining biological replicate samples. At time T these were harvested and the latter biotinylated and separated into 4SU-containing (labelled) and 4SU non-containing (unlabelled) fractions by passage through a streptavidin column. Total RNA for both timepoints was hybridisaed on the chips, as were the separated fractions from time T, giving 12 chips in total. This design was repeated at a second temperature, giving 24 hybridisations. The two tempertaures were 27C and 17C and time T was 1 hour after dawn at 27C and two hours after dawn at 17C.

2013-12-07 | E-GEOD-53071 | biostudies-arrayexpress

NGSEP3: accurate variant calling across species and sequencing protocols.

Project description:MotivationAccurate detection, genotyping and downstream analysis of genomic variants from high-throughput sequencing data are fundamental features in modern production pipelines for genetic-based diagnosis in medicine or genomic selection in plant and animal breeding. Our research group maintains the Next-Generation Sequencing Experience Platform (NGSEP) as a precise, efficient and easy-to-use software solution for these features.ResultsUnderstanding that incorrect alignments around short tandem repeats are an important source of genotyping errors, we implemented in NGSEP new algorithms for realignment and haplotype clustering of reads spanning indels and short tandem repeats. We performed extensive benchmark experiments comparing NGSEP to state-of-the-art software using real data from three sequencing protocols and four species with different distributions of repetitive elements. NGSEP consistently shows comparative accuracy and better efficiency compared to the existing solutions. We expect that this work will contribute to the continuous improvement of quality in variant calling needed for modern applications in medicine and agriculture.Availability and implementationNGSEP is available as open source software at http://ngsep.sf.net.Supplementary informationSupplementary data are available at Bioinformatics online.

| S-EPMC6853766 | biostudies-literature

How to Optimize Measurement Protocols: An Example of Assessing Measurement Reliability Using Generalizability Theory.

Project description:Purpose: This article identifies how to assess multiple sources of measurement error and identify optimal measurement strategies for obtaining clinical outcomes. Method: Obtaining, interpreting, and using information gained from measurements is instrumental in physiotherapy. To be useful, measurements must have a sufficiently small measurement error. Traditional expressions of reliability include relative reliability in the form of an intra-class correlation coefficient and absolute reliability in the form of the standard error of measurement. Traditional metrics are limited to assessing one source of error; however, real-world measurements consist of many sources of error. The measurement framework generalizability theory (GT) allows researchers to partition measurement errors into multiple sources. GT further allows them to calculate the relative and absolute reliability of any measurement strategy, thereby allowing them to identify the optimal strategy. We provide a brief comparison of classical test theory and GT, followed by an overview of the terminology and methodology used in GT, and then an example showing how GT can be used to minimize error associated with measuring knee extension power. Conclusion: The methodology described provides tools for researchers and clinicians that enable detailed interpretation and understanding of the error associated with their measurements.

| S-EPMC7238938 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data