Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hollow MFI Zeolite Supported Pt Catalysts for Highly Selective and Stable Hydrodeoxygenation of Guaiacol to Cycloalkanes.

ABSTRACT: Hollow Silicalite-1 and ZSM-5 zeolites with hierarchical porous shells have been synthesized by using a dissolution-recrystallization method. The morphology, structure, and acidity of these zeolites supported Pt catalysts were characterized by XRD, FT-IR, MAS-SSNMR, FE-SEM, FE-TEM, N₂-BET, XPS, NH₃-TPD, and CO pulse chemisorption. Compared to the conventional ZSM-5 supported Pt catalyst, the special structure in hollow ZSM-5 zeolite significantly promotes the dispersion of metallic Pt and the synergistic effect between metal active sites and acid sites. These boost the catalytic activity, selectivity of guaiacol hydrodeoxygenation toward cycloalkanes and long-term stability over the Pt/hollow ZSM-5 catalyst combined with improved mass transfer of products and reactants derived from the hierarchical hollow porous structure. Moreover, the Pt/hollow ZSM-5 catalyst exhibits excellent low temperature catalytic activity to completely transform guaiacol into cycloalkanes with the cyclohexane selectivity of more than 93% at 220 °C, suggesting that hollow ZSM-5 zeolite is a promising support for upgrading of bio-oils.

SUBMITTER: Niu X

PROVIDER: S-EPMC6473964 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Effects of Crystallite Sizes of Pt/HZSM-5 Zeolite Catalysts on the Hydrodeoxygenation of Guaiacol.

Project description:Herein, Pt/HZSM-5 zeolite catalysts with different crystallite sizes ranging from nanosheet (~2 nm) to bulk crystals (~1.5 μm) have been prepared for the hydrodeoxygenation of guaiacol, and their effects on the reaction pathway and product selectivity were explored. HZSM-5 zeolites prepared by seeding (Pt/Z-40: ~40 nm) or templating (Pt/NS-2: ~2 nm) fabricated intra-crystalline mesopores and thus enhanced the reaction rate by promoting the diffusion of various molecules, especially the bulky ones such as guaiacol and 2-methoxycyclohexanol, leading to a higher cyclohexane selectivity of up to 80 wt % (both for Pt/Z-40 and Pt/NS-2) compared to 70 wt % for bulky HZSM-5 (Pt/CZ: ~1.5 μm) at 250 °C and 120 min. Furthermore, decreased crystallite sizes more effectively promoted the dispersion of Pt particles than bulky HZSM-5 (Pt/Z-400: ~400 nm and Pt/CZ). The relatively low distance between Pt and acidic sites on the Pt/Z-40 catalyst enhanced the metal/support interaction and induced the reaction between the guaiacol molecules adsorbed on the acidic sites and the metal-activated hydrogen species, which was found more favorable for deoxygenation than for hydrogenation of oxygen-containing molecules. In addition, Pt/NS-2 catalyst with a highly exposed surface facilitated more diverse reaction pathways such as alkyl transfer and isomerization.

| S-EPMC7698081 | biostudies-literature

Hydrodeoxygenation of Isoeugenol over Alumina-Supported Ir, Pt, and Re Catalysts.

Project description:Hydrodeoxygenation (HDO) of isoeugenol (IE) was investigated using bimetallic iridium-rhenium and platinum-rhenium catalysts supported on alumina in the temperature and pressure ranges of 200-250 °C and 17-40 bar in nonpolar dodecane as a solvent. The main parameters were catalyst type, hydrogen pressure, and initial concentration. Nearly quantitative yield of the desired product, propylcyclohexane (PCH), at complete conversion in 240 min was obtained with Ir-Re/Al2O3 prepared by the deposition-precipitation method using 0.1 mol/L IE initial concentration. High iridium dispersion together with a modification effect of rhenium provided in situ formation of the IrRe active component with reproducible catalytic activity for selective HDO of IE to PCH. The reaction rate was shown to increase with the increasing initial IE concentration promoting also HDO and giving a higher liquid phase mass balance. Increasing hydrogen pressure benefits the PCH yield.

| S-EPMC6292701 | biostudies-literature

Production of Sustainable Aviation Fuel by Hydrocracking of n-Heptadecane Using Pt-Supported Y-Zeolite-Al2O3 Composite Catalysts

Project description: Not available

| S-EPMC10809707 | biostudies-literature

Reactant-Induced Structural Evolution of Pt Catalysts Confined in Zeolite.

Project description:Reactant-induced structural evolutions of heterogeneous metal catalysts are frequently observed in numerous catalytic systems, which can be associated with the formation or deactivation of active sites. In this work, we will show the structural transformation of subnanometer Pt clusters in pure-silica MFI zeolite structure in the presence of CO, O2, and/or H2O and the catalytic consequences of the Pt-zeolite materials derived from various treatment conditions. By applying the appropriate pretreatment under a reactant atmosphere, we can precisely modulate the size distribution of Pt species spanning from single Pt atoms to small Pt nanoparticles (1-5 nm) in the zeolite matrix, resulting in the desirably active and stable Pt species for CO oxidation. We also show the incorporation of Fe into the zeolite framework greatly promotes the stability of Pt species against undesired sintering under harsh conditions (up to 650 °C in the presence of CO, O2, and moisture).

| S-EPMC10900205 | biostudies-literature

Assessment of the Location of Pt Nanoparticles in Pt/zeolite Y/?-Al2O3 Composite Catalysts.

Project description:The location of Pt nanoparticles was studied in Pt/zeolite Y/?-Al2O3 composite catalysts prepared by H2PtCl6???6H2O (CPA) or Pt(NH3)4(NO3)2 (PTA) as Pt precursors. The aim of this study is to validate findings from Transmission Electron Microscopy (TEM) by using characterization techniques that sample larger amounts of catalyst per measurement. Quantitative X-ray Photoelectron Spectroscopy (XPS) showed that the catalyst prepared with CPA led to a significantly higher Pt/Al atomic ratio than the catalyst prepared with PTA confirming that the 1-2?nm sized Pt nanoparticles in the former catalyst were located on the open and mesoporous ?-Al2O3 component, whereas they were located in the micropores of zeolite Y in the latter. By using infrared spectroscopy, a shift in the absorption band maximum of CO chemisorbed on Pt nanoparticles was observed, which can be attributed to a difference in electronic properties depending on the support of the Pt nanoparticles. Finally, model hydrogenation experiments were performed using ?-phenylcinnamaldehyde, a reactant molecule with low diffusivity in zeolite Y micropores, resulting in a 5 times higher activity for the catalyst prepared by CPA compared to PTA. The combined use of these characterization techniques allow us to draw more robust conclusions on the ability to control the location of Pt nanoparticles by using either CPA or PTA as precursors in zeolite/?-Al2O3 composite catalyst materials.

| S-EPMC7006758 | biostudies-literature

Metal Phosphate-Supported Pt Catalysts for CO Oxidation.

Project description:Oxides (such as SiO?, TiO?, ZrO?, Al?O?, Fe?O?, CeO?) have often been used to prepare supported Pt catalysts for CO oxidation and other reactions, whereas metal phosphate-supported Pt catalysts for CO oxidation were rarely reported. Metal phosphates are a family of metal salts with high thermal stability and acid-base properties. Hydroxyapatite (Ca10(PO?)?(OH)?, denoted as Ca-P-O here) also has rich hydroxyls. Here we report a series of metal phosphate-supported Pt (Pt/M-P-O, M = Mg, Al, Ca, Fe, Co, Zn, La) catalysts for CO oxidation. Pt/Ca-P-O shows the highest activity. Relevant characterization was conducted using N? adsorption-desorption, inductively coupled plasma (ICP) atomic emission spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), CO? temperature-programmed desorption (CO?-TPD), X-ray photoelectron spectroscopy (XPS), and H? temperature-programmed reduction (H?-TPR). This work furnishes a new catalyst system for CO oxidation and other possible reactions.

| S-EPMC5456429 | biostudies-literature

Zeolite Supported Pt for Depolymerization of Polyethylene by Induction Heating.

Project description:We demonstrate that for polyethylene depolymerization with induction heating (IH), using a bifunctional (Pt- or Pt-Sn-containing zeolite) hydrocracking catalyst, we can obtain high hydrocarbon product yields (up to 95 wt % in 2 h) at a relatively low surface temperature (375 °C) and with a tunable product distribution ranging from light gas products to gasoline- to diesel-range hydrocarbons. Four zeolite types [MFI, LTL, CHA(SSZ-13), and TON] were chosen as the supports due to their varying pore sizes and structures. These depolymerization results are obtained at atmospheric pressure and without the use of H2 and result in an alkane/alkene mixture with virtually no methane, aromatics, or coke formation. We also demonstrate how IH helps overcome diffusional resistances associated with conventional thermal heating and thereby shortens reaction times.

| S-EPMC10251740 | biostudies-literature

Solvent-Free Hydrodeoxygenation of Triglycerides to Diesel-like Hydrocarbons over Pt-Decorated MoO2 Catalysts.

Project description:In the present work, the solvent-free hydrodeoxygenation of palm oil as a representative triglyceride model compound to diesel-like hydrocarbons was evaluated in a batch reactor using Pt-decorated MoO2 catalysts. The catalysts with various Pt loadings (0.5-3%) were synthesized by an incipient wetness impregnation method. The metallic Pt and MoO2 phases were detected in the XRD patterns of as-prepared catalysts after the reaction and acted as active components for the deoxygenation reactions. The XPS experiments confirmed the existence of metallic Pt and PtO x species. The XANES investigation of Mo L3-edge spectra elucidated a change in the valence state by the transformation of MoO3 into MoO2 species after the deoxygenation reaction. The TEM observation revealed the formation of Pt nanoparticles in the range of 1-3 nm decorated on MoO2 species. The number of acid sites increased with stronger metal-support interactions on increasing the Pt loading. The catalytic performance of the MoO2 catalyst significantly improved with a small amount of Pt decoration. However, the further increase in Pt loading did not relatively increase the deoxygenation activity due to the formation of the agglomerated Pt particles. The high performance of the decorated catalysts could be attributed to the moderate acidity from the Pt dispersed on MoO2 toward decarbonylation and decarboxylation reactions.

| S-EPMC7114607 | biostudies-literature

Cobalt-Graphene Catalyst for Selective Hydrodeoxygenation of Guaiacol to Cyclohexanol.

Project description:Herein, cobalt-reduced graphene oxide (rGO) catalyst was synthesized with a practical impregnation-calcination approach for the selective hydrodeoxygenation (HDO) of guaiacol to cyclohexanol. The synthesized Co/rGO was characterized by transmission electron microscopy (TEM), high-angle annular dark-field scanning TEM (HAADF-STEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffraction (XRD), and H2 temperature-programmed reduction (H2-TPR) analysis. According to the comprehensive characterization results, the catalyst contains single Co atoms in the graphene matrix and Co oxide nanoparticles (CoOx) on the graphene surface. The isolated Co atoms embedded in the rGO matrix form stable metal carbides (CoCx), which constitute catalytically active sites for hydrogenation. The rGO material with proper amounts of N heteroatoms and lattice defects becomes a suitable graphene material for fabricating the catalyst. The Co/rGO catalyst without prereduction treatment leads to the complete conversion of guaiacol with 93.2% selectivity to cyclohexanol under mild conditions. The remarkable HDO capability of the Co/rGO catalyst is attributed to the unique metal-acid synergy between the CoCx sites and the acid sites of the CoOx nanoparticles. The CoCx sites provide H while the acid sites of CoOx nanoparticles bind the C-O group of reactants to the surface, allowing easier C-O scission. The reaction pathways were characterized based on the observed reaction-product distributions. The effects of the process parameters on catalyst preparation and the HDO reaction, as well as the reusability of the catalyst, were systematically investigated.

| S-EPMC9565367 | biostudies-literature

The Enhancing Effect of Stable Oxygen Functional Groups on Porous-Carbon-Supported Pt Catalysts for Alkaline Hydrogen Evolution.

Project description:The oxygen functionalization of carbon materials has widely been employed to improve the catalytic performance of carbon-supported Pt (Pt/C) catalysts. Hydrochloric acid (HCl) has often been employed to clean carbons during the preparation of carbon materials. However, the effect of oxygen functionalization through a HCl treatment of porous carbon (PC) supports on the performance of the alkaline hydrogen evolution reaction (HER) has rarely been investigated. Herein, the impact of HCl combined with the heat treatment of PC supports on the HER performance of Pt/C catalysts has been comprehensively investigated. The structural characterizations revealed similar structures of pristine and modified PC. Nevertheless, the HCl treatment resulted in abundant hydroxyl and carboxyl groups and the further heat treatment formed thermally stable carbonyl and ether groups. Among the catalysts, Pt loading on the HCl-treated PC followed by a heat treatment at 700 °C (Pt/PC-H-700) exhibited elevated HER activity with a lower overpotential of 50 mV at 10 mA cm-2 when compared to the unmodified Pt/PC (89 mV). Pt/PC-H-700 also exhibited better durability than the Pt/PC. Overall, novel insights into the impact of the surface chemistry properties of porous carbon supports on the HER performance of Pt/C catalysts were provided, which were useful for highlighting the feasible improvement of HER performances by regulating the surface oxygen species of porous carbon supports.

| S-EPMC10145733 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data