Dataset Information

Flow and detailed 3D morphodynamic data from laboratory experiments of fluvial dike breaching.

ABSTRACT: This paper presents a dataset obtained from fifty four laboratory experiments of the breaching of fluvial dikes due to flow overtopping. Data were collected on two complementary experimental setups, each consisting of a main channel representing the river, an erodible lateral dike and a floodplain. The dataset covers seven test series, involving varying hydraulic boundary conditions (e.g. inflow discharge, downstream boundary conditions), main channel dimensions, as well as bottom and dike material. The following experimental data were produced: time series of water levels in the main channel, time series of flow discharges in the main channel and through the breach, as well as high resolution 3D reconstructions of the breach geometry during its expansion. The latter measurements were performed using a novel non-intrusive laser profilometry technique developed for this research. Reuse of the collected data will support efforts to improve our understanding of the physical processes underpinning fluvial dike breaching. It will also enable benchmarking the accuracy of conceptual or detailed numerical models for the prediction of dike breaching, which is central to flood risk management.

SUBMITTER: Rifai I

PROVIDER: S-EPMC6514018 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Flow and detailed 3D morphodynamic data from laboratory experiments of fluvial dike breaching.

Rifai Ismail I El Kadi Abderrezzak Kamal K Erpicum Sébastien S Archambeau Pierre P Violeau Damien D Pirotton Michel M Dewals Benjamin B

Scientific data 20190513 1

This paper presents a dataset obtained from fifty four laboratory experiments of the breaching of fluvial dikes due to flow overtopping. Data were collected on two complementary experimental setups, each consisting of a main channel representing the river, an erodible lateral dike and a floodplain. The dataset covers seven test series, involving varying hydraulic boundary conditions (e.g. inflow discharge, downstream boundary conditions), main channel dimensions, as well as bottom and dike mater ...[more]

PMID: 31086190

Similar Datasets

Project description:BACKGROUND:QT interval-prolonging drug-drug interactions (QT-DDIs) may increase the risk of life-threatening arrhythmia. Despite guidelines for testing from regulatory agencies, these interactions are usually discovered after drugs are marketed and may go undiscovered for years. OBJECTIVES:Using a combination of adverse event reports, electronic health records (EHR), and laboratory experiments, the goal of this study was to develop a data-driven pipeline for discovering QT-DDIs. METHODS:1.8 million adverse event reports were mined for signals indicating a QT-DDI. Using 1.6 million electrocardiogram results from 380,000 patients in our institutional EHR, these putative interactions were either refuted or corroborated. In the laboratory, we used patch-clamp electrophysiology to measure the human ether-à-go-go-related gene (hERG) channel block (the primary mechanism by which drugs prolong the QT interval) to evaluate our top candidate. RESULTS:Both direct and indirect signals in the adverse event reports provided evidence that the combination of ceftriaxone (a cephalosporin antibiotic) and lansoprazole (a proton-pump inhibitor) will prolong the QT interval. In the EHR, we found that patients taking both ceftriaxone and lansoprazole had significantly longer QTc intervals (up to 12 ms in white men) and were 1.4 times more likely to have a QTc interval above 500 ms. In the laboratory, we found that, in combination and at clinically relevant concentrations, these drugs blocked the hERG channel. As a negative control, we evaluated the combination of lansoprazole and cefuroxime (another cephalosporin), which lacked evidence of an interaction in the adverse event reports. We found no significant effect of this pair in either the EHR or in the electrophysiology experiments. Class effect analyses suggested this interaction was specific to lansoprazole combined with ceftriaxone but not with other cephalosporins. CONCLUSIONS:Coupling data mining and laboratory experiments is an efficient method for identifying QT-DDIs. Combination therapy of ceftriaxone and lansoprazole is associated with increased risk of acquired long QT syndrome.

Project description:Successful eutrophication control strategies need to address the limiting nutrient. We conducted a battery of laboratory and in situ nutrient-limitation tests with waters collected from 9 streams in an agricultural region of the upper Snake River basin, Idaho, USA. Laboratory tests used the green alga Raphidocelis subcapitata, the macrophyte Lemna minor (duckweed) with native epiphytes, and in situ nutrient-limitation tests of periphyton were conducted with nutrient-diffusing substrates (NDS). In the duckweed/epiphyte test, P saturation occurred when concentrations reached about 100 μg/L. Chlorophyll a in epiphytic periphyton was stimulated at low P additions and by about 100 μg/L P, epiphytic periphyton chlorophyll a appeared to be P saturated. Both duckweed and epiphyte response patterns with total N were weaker but suggested a growth stimulation threshold for duckweed when total N concentrations exceeded about 300 μg/L and approached saturation at the highest N concentration tested, 1300 μg/L. Nutrient uptake by epiphytes and macrophytes removed up to 70 and 90% of the N and P, respectively. The green algae and the NDS nutrient-limitation test results were mostly congruent; N and P co-limitation was the most frequent result for both test series. Across all tests, when N:P molar ratios >30 (mass ratios >14), algae or macrophyte growth was P limited; N limitation was observed at N:P molar ratios up to 23 (mass ratios up to 10). A comparison of ambient periphyton chlorophyll a concentrations with chlorophyll a accrued on control artificial substrates in N-limited streams, suggests that total N concentrations associated with a periphyton chlorophyll a benchmark for desirable or undesirable conditions for recreation would be about 600 to 1000 μg/L total N, respectively. For P-limited streams, the corresponding benchmark concentrations were about 50 to 90 μg/L total P, respectively. Our approach of integrating controlled experiments and matched biomonitoring field surveys was cost effective and more informative than either approach alone.

Project description:Salt marshes provide valuable ecosystem services including coastal protection by reducing wave loading on dikes and seawalls. If the topsoil is erosion resistant to fast-flowing water, it may also reduce breach depth if a dike fails. In this experiment, we quantified the topsoil erosion resistance from marshes and bare tidal flats with different soil types to understand the extent to which they can help reduce breach depth. Intact soil samples were collected from 11 locations in the Netherlands at different tidal elevations and then exposed for 3 h to 2.3 m/s currents. To the samples that remained stable after flow exposure, an artificial crack was made to test their stability following soil disturbance. All samples from the tidal flats were completely eroded, regardless of sediment type. In contrast, all samples from well-established marsh plateaus were stable as long as no disturbances were made, including those with sandy subsoils. After creating artificial cracks, samples with a thin cohesive top layer on top of sandy subsoil collapsed, while marshes with silty subsoils remained stable. Pioneer marshes on sandy substrate without a cohesive top layer were the only vegetated soils that completely eroded. The lower erosion of marshes with either sandy or silty soils compared to bare tidal flats was best explained by the presence of a top layer with belowground biomass, high organic content, high water content, and low bulk density. When analyzing the erodibility of marshes only, fine root density was the best predictor of erosion resistance. This study demonstrates the importance of preserving, restoring, or creating salt marshes, to obtain a topsoil that is erosion resistant under fast-flowing water, which helps reduce breach dimensions if a dike fails. The probability of topsoil erosion in established marshes with sandy subsoil is higher than in silty marshes. A silty layer of cohesive sediment on top of the sand provides extra erosion resistance as long as it does not break. Pioneer marshes that have not developed a cohesive top layer are erosion sensitive, especially in sandy soils. For future marsh creations, using fine-grained sediments or a mixture of sand with silt or clay is recommended.

Project description:The occurrence of mutations is a cornerstone of the evolutionary theory of adaptation, capitalizing on the rare chance that a mutation confers a fitness benefit. Natural selection is increasingly being leveraged in laboratory settings for industrial and basic science applications. Despite increasing deployment, there are no standardized procedures available for designing and performing adaptive laboratory evolution (ALE) experiments. Thus, there is a need to optimize the experimental design, specifically for determining when to consider an experiment complete and for balancing outcomes with available resources (i.e., laboratory supplies, personnel, and time). To design and to better understand ALE experiments, a simulator, ALEsim, was developed, validated, and applied to the optimization of ALE experiments. The effects of various passage sizes were experimentally determined and subsequently evaluated with ALEsim, to explain differences in experimental outcomes. Furthermore, a beneficial mutation rate of 10-6.9 to 10-8.4 mutations per cell division was derived. A retrospective analysis of ALE experiments revealed that passage sizes typically employed in serial passage batch culture ALE experiments led to inefficient production and fixation of beneficial mutations. ALEsim and the results described here will aid in the design of ALE experiments to fit the exact needs of a project while taking into account the resources required and will lower the barriers to entry for this experimental technique.IMPORTANCE ALE is a widely used scientific technique to increase scientific understanding, as well as to create industrially relevant organisms. The manner in which ALE experiments are conducted is highly manual and uniform, with little optimization for efficiency. Such inefficiencies result in suboptimal experiments that can take multiple months to complete. With the availability of automation and computer simulations, we can now perform these experiments in an optimized fashion and can design experiments to generate greater fitness in an accelerated time frame, thereby pushing the limits of what adaptive laboratory evolution can achieve.

Dataset Information

Flow and detailed 3D morphodynamic data from laboratory experiments of fluvial dike breaching.

Publications

Flow and detailed 3D morphodynamic data from laboratory experiments of fluvial dike breaching.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets