Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Multimodal Fluorescent Polymer Sensor for Highly Sensitive Detection of Nitroaromatics.

ABSTRACT: Detection of nitroaromatic explosives with high sensitivity and selectivity is extremely important for civilian and military safety. Here, we report the synthesis and multimodal sensing applications of an emissive alanine based dansyl tagged copolymer P(MMA-co-Dansyl-Ala-HEMA) (DCP), synthesized by RAFT copolymerization. The fluorescent co-polymer exhibited high sensitivity and selectivity towards conventional nitroaromatic explosives such as DNT, TNT and TNP in solution at lower range of µM level and also with saturated vapor of NACs. The quantum yield of the co-polymer was measured to be very high (?_f?=?77%) which make it an ideal candidate for sensing in solution as well as in vapor phase. The fluorescence signal from DCP copolymer gets significantly quenched upon addition of aliquots of DNT, TNT, and TNP. The Stern-Volmer constant was calculated to be very high. The quenching mechanism was further established by fluorescence up-conversion, time-resolved fluorescence and steady state absorption spectroscopy. The energetics of sensing process was calculated by Density Functional Theory (DFT) studies. We also fabricate a thin film polymer sensor which was able to detect nitroaromatic vapors with high selectivity. This opens up the possibility of building a low-cost and light-weight nitroaromatic explosives sensor for field use.

SUBMITTER: Kumar V

PROVIDER: S-EPMC6514181 | biostudies-literature | 2019 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Ratiometric Fluorescent Sensor Based on Dye/Tb (III) Functionalized UiO-66 for Highly Sensitive Detection of TDGA.

Project description:Thiodiglycolic acid (TDGA) is a biomarker for monitoring vinyl chloride exposure. Exploring a facile, rapid and precise analysis technology to quantify TDGA is of great significance. In this research, we demonstrate a fluorescent sensor based on dual-emissive UiO-66 for TDGA detection. This ratiometric fluorescent material named C460@Tb-UiO-66-(COOH)2 was designed and synthesized by introducing organic dye 7-diethylamino-4-methylcoumarin (C460) and Tb3+ into UiO-66-(COOH)2. The as-obtained C460@Tb-UiO-66-(COOH)2 samples showed highly selective recognition, excellent anti-interference and rapid response characteristics for the recognition of TDGA. The detection limit is 0.518 mg·mL-1, which is much lower than the threshold of 20 mg·mL-1 for a healthy person. In addition, the mechanism of TDGA-induced fluorescence quenching is discussed in detail. This sensor is expected to detect TDGA content in human urine.

| S-EPMC9570906 | biostudies-literature

Novel Metal-Free Fluorescent Sensor Based on Molecularly Imprinted Polymer N-CDs@MIP for Highly Selective Detection of TNP.

Project description:In this article, we designed a fluorometric sensor based on nitrogen-passivated carbon dots infused with a molecularly imprinted polymer (N-CDs@MIP) via a reverse microemulsion technique using 3-aminopropyltriethoxysilane as a functional monomer, tetraethoxysilane as a cross-linker, and 2,4,6-trinitrophenol (TNP) as a template. The synthesized probe was used for selective and sensitive detection of trace amounts of TNP. The infusion of N-CDs (QY-21.6 percent) with a molecularly imprinted polymer can increase the fluorescent sensor sensitivity to detect TNP. Removal of template molecules leads to the formation of a molecularly imprinted layer, and N-CDs@MIP fluorescence response was quenched by TNP. The developed fluorescence probe shows a fine linear range from 0.5 to 2.5 nM with a detection limit of 0.15 nM. The synthesized fluorescent probe was used to analyze TNP in regular tap and lake water samples.

| S-EPMC8756778 | biostudies-literature

Facile synthesis of carbon nitride quantum dots as a highly selective and sensitive fluorescent sensor for the tetracycline detection.

Project description:Enhanced blue fluorescent carbon nitride quantum dots (g-C3N4QDs) were synthesized by a simple solvothermal "tailoring" process from bulk g-C3N4 and analyzed by various characterization methods. The as-obtained g-C3N4QDs were successfully applied in the determination of tetracycline (TC) with a good linear relationship in the range of 0.23-202.70 μM. The proposed fluorescent sensor shows excellent stability, good repeatability, high selectivity and outstanding sensitivity to TC with a low detection limit of 0.19 μM. The fluorescence quenching mechanism of g-C3N4QDs with TC was mainly governed by static quenching and the inner filter effect. The method was successfully applied to monitor TC in tap water and milk powder samples.

| S-EPMC9036896 | biostudies-literature

Highly-sensitive optical organic vapor sensor through polymeric swelling induced variation of fluorescent intensity.

Project description:Traditional optical organic vapor sensors with solvatochromic shift mechanisms have lower sensitivity due to weak intermolecular interactions. Here, we report a general strategy to prepare a higher sensitivity optical organic vapor sensor through polymeric swelling-induced variation of fluorescent intensity. We combine one-dimensional polymeric structures and aggregation-induced emission (AIE) molecules together to form a polymer/AIE microwires array as a sensor. The prepared sensors based on different commercial polymers can successfully classify and identify various organic vapors. Among them, the poly(vinyl butyral)/AIE microwires array can detect methanol vapor as low as 0.05% of its saturation vapor pressure. According to the theory of like dissolves like, we further fabricate a polymer/AIE microwires array derived from designable polyethersulfones, through regulating their side chains, to distinguish similar organic vapors of benzene and toluene. Both experimental and theoretical simulation results reveal that specific molecular interactions between the polyethersulfones and organic vapors can improve the specific recognition performance of the sensors.

| S-EPMC6143602 | biostudies-literature

Highly sensitive gas-phase explosive detection by luminescent microporous polymer networks.

Project description:We propose microporous networks (MPNs) of a light emitting spiro-carbazole based polymer (PSpCz) as luminescent sensor for nitro-aromatic compounds. The MPNs used in this study can be easily synthesized on arbitrarily sized/shaped substrates by simple and low-cost electrochemical deposition. The resulting MPN afford an extremely high specific surface area of 1300?m(2)/g, more than three orders of magnitude higher than that of the thin films of the respective monomer. We demonstrate, that the luminescence of PSpCz is selectively quenched by nitro-aromatic analytes, e.g. nitrobenzene, 2,4-DNT and TNT. In striking contrast to a control sample based on non-porous spiro-carbazole, which does not show any luminescence quenching upon exposure to TNT at levels of 3?ppm and below, the microporous PSpCz shows a clearly detectable response even at TNT concentrations as low as 5?ppb, clearly demonstrating the advantage of microporous films as luminescent sensors for traces of explosive analytes. This level states the vapor pressure of TNT at room temperature.

| S-EPMC4931441 | biostudies-literature

Highly sensitive ammonia sensor for diagnostic purpose using reduced graphene oxide and conductive polymer.

Project description:In this study, we fabricate ammonia sensors based on hybrid thin films of reduced graphene oxide (RGO) and conducting polymers using the Langmuir-Schaefer (LS) technique. The RGO is first prepared using hydrazine (Hy) and/or pyrrole (Py) as the reducing agents, and the resulting pyrrole-reduced RGO (Py-RGO) is then hybridized with polyaniline (PANI) and/or polypyrrole (PPy) by in-situ polymerization. The four different thin films of Hy-RGO, Py-RGO, Py-RGO/PANI, and Py-RGO/PPy are deposited on interdigitated microelectrodes by the LS techniques, and their structures are characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results of ammonia sensing experiments indicate that the Py-RGO/PANI film exhibits the highest sensor response of these four films, and that it exhibits high reproducibility, high linearity of concentration dependency, and a very low detection limit (0.2 ppm) both in N2 and exhaled air environments. The current gas sensor, therefore, has potential for diagnostic purposes because it has the additional advantages of facile fabrication, ease of use at room temperature, and portability compared to conventional high-sensitivity ammonia sensors.

| S-EPMC6303394 | biostudies-literature

Highly Sensitive Detection of Benzoyl Peroxide Based on Organoboron Fluorescent Conjugated Polymers.

Project description:The method capable of rapid and sensitive detection of benzoyl peroxide (BPO) is necessary and receiving increasing attention. In consideration of the vast signal amplification of fluorescent conjugated polymers (FCPs) for high sensitivity detection and the potential applications of boron-containing materials in the emerging sensing fields, the organoboron FCPs, poly (3-aminophenyl boronic acid) (PABA) is directly synthesized via free-radical polymerization reaction by using the commercially available 3-aminophenyl boronic acid (ABA) as the functional monomer and ammonium persulfate as the initiator. PABA is employed as a fluorescence sensor for sensing of trace BPO based on the formation of charge-transfer complexes between PABA and BPO. The fluorescence emission intensity of PABA demonstrates a negative correlation with the concentration of BPO. And a linear range of 8.26 × 10-9 M-8.26 × 10-4 M and a limit of detection of 1.06 × 10-9 M as well as a good recovery (86.25%-111.38%) of BPO in spiked real samples (wheat flour and antimicrobial agent) are obtained. The proposed sensor provides a promising prospective candidate for the rapid detection and surveillance of BPO.

| S-EPMC6835668 | biostudies-literature

Highly Sensitive Ratiometric Fluorescent Paper Sensors for the Detection of Fluoride Ions.

Project description:Two sensitive and ratiometric fluorescent probes (probe I and probe II) were developed for the detection of fluoride ions. Probe I can detect fluoride ions quantitatively within a range of 0-6 μM and a detection limit of 73 nM, while probe II has a range of 0-40 μM and a detection limit of 138 nM. The test strips from probe I are quickly able to recognize F- (5 min) inside of the F- safety level in drinking water (1.0 mg/L, ∼5 μM) under 254 nm ultraviolet light, and the test strips from probe II quickly recognize F- (12 min) in dangerously high F- levels in water (4.0 mg/L, ∼21 μM) under 254 nm ultraviolet light. This combination of fluorescent paper sensors from probe I and probe II can be used as a simple and convenient tool to determine whether water is safe to drink or dangerous.

| S-EPMC6648022 | biostudies-literature

A highly selective "turn-on" water-soluble fluorescent sensor for gallium ion detection.

Project description:In this work, a novel sensor, (E)-N'-(3-(tert-butyl)-2-hydroxybenzylidene)thiophene-2-carbohydrazide (1), based on salicylaldehyde and thiophene hydrazide moieties was designed and synthesized. The single-crystal structure of 1 was achieved and studied for understanding its functional properties. The interaction and recognition abilities of 1 with different metal ions were investigated. Sensor 1 showed excellent "turn-on" fluorescence with highly selective and specific recognition ability in the presence of gallium ions (Ga3+) in an aqueous solution. The sensing behavior of 1 with Ga3+ was also studied by photophysical experiments, ESI-MS analysis, and 1H NMR titration. The limit of detection (LOD) and limit of quantification (LOQ) of 1 for the detection of Ga3+ in an aqueous solution were calculated as 58 nM, and 192 nM, respectively. DFT calculations were carried out to optimize the configuration of 1 and 1-Ga3+ complexes and rationalize the photophysical experimental data. Highly selective test strips based on sensor 1 were developed for Ga3+ detection. Sensor 1 was also used to detect Ga3+ in actual water samples, and a considerable recovery rate was obtained.

| S-EPMC9033676 | biostudies-literature

Highly sensitive "turn-on" fluorescent sensor for Hg2+ in aqueous solution based on structure-switching DNA.

Project description:A simple design of "turn-on" fluorescent sensor for mercury was demonstrated based on structure-switching DNA with a low detection limit of 3.2 nM and high selectivity.

| S-EPMC3405163 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data