Dataset Information

Preparation of Zirconium-89 Solutions for Radiopharmaceutical Purposes: Interrelation Between Formulation, Radiochemical Purity, Stability and Biodistribution.

ABSTRACT: Zirconium-89 is a promising radionuclide for nuclear medicine. The aim of the present work was to find a suitable method for obtaining zirconium-89 solutions for radiopharmaceutical purposes. For this purpose, the ion exchange behavior of zirconium-89 solutions was studied. Radio-TLC (thin layer chromatography) and biodistribution studies were carried out to understand speciation of zirconium-89 complexes and their role in the development of new radiopharmaceuticals. Three methods of zirconium-89 isolation were studied using ZR (hydroxamate) and Chelex-100 resins. It was found that ZR-resin alone is not enough to obtain stable zirconium-89 formulations. An easy and effective method of reconstitution of [⁸⁹Zr]Zr-oxalate to [⁸⁹Zr]Zr-citrate using Chelex-100 resin was developed. Developed procedures allow obtaining [⁸⁹Zr]Zr-oxalate (in 0.1 M sodium oxalate solution) and [⁸⁹Zr]Zr-citrate (in 0.1-1.0 M sodium citrate solution). These solutions are perfectly suitable and convenient for radiopharmaceutical purposes. Our results prove [⁸⁹Zr]Zr-citrate to be advantageous over [⁸⁹Zr]Zr-oxalate. During evaluation of speciation of zirconium-89 complexes, a new TLC method was developed, since it was proved that there is no comprehensive method for analysis or zirconium-89 preparations. The new method provides valuable insights about the content of "active" ionic form of zirconium-89. The interrelation of the chromatographic behavior of zirconium-89 preparations and their biodistribution was studied.

SUBMITTER: Larenkov A

PROVIDER: S-EPMC6514948 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundThe favorable decay properties of 43Sc and 44Sc for PET make them promising candidates for future applications in nuclear medicine. An advantage 43Sc (T1/2 = 3.89 h, Eβ+av = 476 keV [88%]) exhibits over 44Sc, however, is the absence of co-emitted high energy γ-rays. While the production and application of 44Sc has been comprehensively discussed, research concerning 43Sc is still in its infancy. This study aimed at developing two different production routes for 43Sc, based on proton irradiation of enriched 46Ti and 43Ca target material.Results43Sc was produced via the 46Ti(p,α)43Sc and 43Ca(p,n)43Sc nuclear reactions, yielding activities of up to 225 MBq and 480 MBq, respectively. 43Sc was chemically separated from enriched metallic 46Ti (97.0%) and 43CaCO3 (57.9%) targets, using extraction chromatography. In both cases, ~90% of the final activity was eluted in a small volume of 700 μL, thereby, making it suitable for direct radiolabeling. The prepared products were of high radionuclidic purity, i.e. 98.2% 43Sc were achieved from the irradiation of 46Ti, whereas the product isolated from irradiated 43Ca consisted of 66.2% 43Sc and 33.3% 44Sc. A PET phantom study performed with 43Sc, via both nuclear reactions, revealed slightly improved resolution over 44Sc. In order to assess the chemical purity of the separated 43Sc, radiolabeling experiments were performed with DOTANOC, attaining specific activities of 5-8 MBq/nmol, respectively, with a radiochemical yield of >96%.ConclusionsIt was determined that higher 43Sc activities were accessible via the 43Ca production route, with a comparatively less complex target preparation and separation procedure. The product isolated from irradiated 46Ti, however, revealed purer 43Sc with minor radionuclidic impurities. Based on the results obtained herein, the 43Ca route features some advantages (such as higher yields and direct usage of the purchased target material) over the 46Ti path when aiming at 43Sc production on a routine basis.

Project description:BackgroundAs 225Ac-labeled radiopharmaceuticals continue to show promise as targeted alpha therapeutics, there is a growing need to standardize quality control (QC) testing procedures. The determination of radiochemical purity (RCP) is an essential QC test. A significant obstacle to RCP testing is the disruption of the secular equilibrium between actinium-225 and its daughter radionuclides during labeling and QC testing. In order to accelerate translation of actinium-225 targeted alpha therapy, we aimed to determine the earliest time point at which the RCP of an 225Ac-labeled radiopharmaceutical can be accurately quantified.ResultsSix ligands were conjugated to macrocyclic metal chelators and labeled with actinium-225 under conditions designed to generate diverse incorporation yields. RCP was determined by radio thin layer chromatography (radioTLC) followed by exposure of the TLC plate on a phosphor screen either 0.5, 2, 3.5, 5, 6.5, or 26 h after the plate was developed. The dataset was used to create models for predicting the true RCP for any pre-equilibrium measurement taken at an early time point. The 585 TLC measurements span RCP values of 1.8-99.5%. The statistical model created from these data predicted an independent data set with high accuracy. Predictions made at 0.5 h are more uncertain than predictions made at later time points. This is primarily due to the decay of bismuth-213. A measurement of RCP > 90% at 2 h predicts a true RCP > 97% and guarantees that RCP will exceed 90% after secular equilibrium is reached. These findings were independently validated using NaI(Tl) scintillation counting and high resolution gamma spectroscopy on a smaller set of samples with 10% ≤ RCP ≤ 100%.ConclusionsRCP of 225Ac-labeled radiopharmaceuticals can be quantified with acceptable accuracy at least 2 h after radioTLC using various methods of quantifying particle emissions. This time point best balances the need to accurately quantify RCP with the need to safely release the batch as quickly as possible.

Dataset Information

Preparation of Zirconium-89 Solutions for Radiopharmaceutical Purposes: Interrelation Between Formulation, Radiochemical Purity, Stability and Biodistribution.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets