Dataset Information

Sensitive and Specific Whole-Cell Biosensor for Arsenic Detection.

ABSTRACT: Whole-cell biosensors (WCBs) have been designed to detect As(III), but most suffer from poor sensitivity and specificity. In this paper, we developed an arsenic WCB with a positive feedback amplifier in Escherichia coli DH5?. The output signal from the reporter mCherry was significantly enhanced by the positive feedback amplifier. The sensitivity of the WCB with positive feedback is about 1 order of magnitude higher than that without positive feedback when evaluated using a half-saturation As(III) concentration. The minimum detection limit for As(III) was reduced by 1 order of magnitude to 0.1?µM, lower than the World Health Organization standard for the arsenic level in drinking water, 0.01?mg/liter or 0.13?µM. Due to the amplification of the output signal, the WCB was able to give detectable signals within a shorter period, and a fast response is essential for in situ operations. Moreover, the WCB with the positive feedback amplifier showed exceptionally high specificity toward As(III) when compared with other metal ions. Collectively, the designed positive feedback amplifier WCB meets the requirements for As(III) detection with high sensitivity and specificity. This work also demonstrates the importance of genetic circuit engineering in designing WCBs, and the use of genetic positive feedback amplifiers is a good strategy to improve the performance of WCBs.IMPORTANCE Arsenic poisoning is a severe public health issue. Rapid and simple methods for the sensitive and specific monitoring of arsenic concentration in drinking water are needed. In this study, we designed an arsenic WCB with a positive feedback amplifier. It is highly sensitive and able to detect arsenic below the WHO limit level. In addition, it also significantly improves the specificity of the biosensor toward arsenic, giving a signal that is about 10 to 20 times stronger in response to As(III) than to other metals. This work not only provides simple but effective arsenic biosensors but also demonstrates the importance of genetic engineering, particularly the use of positive feedback amplifiers, in designing WCBs.

SUBMITTER: Jia X

PROVIDER: S-EPMC6532043 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Sensitive and Specific Whole-Cell Biosensor for Arsenic Detection.

Jia Xiaoqiang X Bu Rongrong R Zhao Tingting T Wu Kang K

Applied and environmental microbiology 20190516 11

Whole-cell biosensors (WCBs) have been designed to detect As(III), but most suffer from poor sensitivity and specificity. In this paper, we developed an arsenic WCB with a positive feedback amplifier in <i>Escherichia coli</i> DH5α. The output signal from the reporter mCherry was significantly enhanced by the positive feedback amplifier. The sensitivity of the WCB with positive feedback is about 1 order of magnitude higher than that without positive feedback when evaluated using a half-saturatio ...[more]

PMID: 30952659

Similar Datasets

Project description:Geochemical exploration for gold (Au) is becoming increasingly important to the mining industry. Current processes for Au analyses require sampling materials to be taken from often remote localities. Samples are then transported to a laboratory equipped with suitable analytical facilities, such as Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) or Instrumental Neutron Activation Analysis (INAA). Determining the concentration of Au in samples may take several weeks, leading to long delays in exploration campaigns. Hence, a method for the on-site analysis of Au, such as a biosensor, will greatly benefit the exploration industry. The golTSB genes from Salmonella enterica serovar typhimurium are selectively induced by Au(I/III)-complexes. In the present study, the golTSB operon with a reporter gene, lacZ, was introduced into Escherichia coli. The induction of golTSB::lacZ with Au(I/III)-complexes was tested using a colorimetric ?-galactosidase and an electrochemical assay. Measurements of the ?-galactosidase activity for concentrations of both Au(I)- and Au(III)-complexes ranging from 0.1 to 5 µM (equivalent to 20 to 1000 ng g(-1) or parts-per-billion (ppb)) were accurately quantified. When testing the ability of the biosensor to detect Au(I/III)-complexes(aq) in the presence of other metal ions (Ag(I), Cu(II), Fe(III), Ni(II), Co(II), Zn, As(III), Pb(II), Sb(III) or Bi(III)), cross-reactivity was observed, i.e. the amount of Au measured was either under- or over-estimated. To assess if the biosensor would work with natural samples, soils with different physiochemical properties were spiked with Au-complexes. Subsequently, a selective extraction using 1 M thiosulfate was applied to extract the Au. The results showed that Au could be measured in these extracts with the same accuracy as ICP-MS (P<0.05). This demonstrates that by combining selective extraction with the biosensor system the concentration of Au can be accurately measured, down to a quantification limit of 20 ppb (0.1 µM) and a detection limit of 2 ppb (0.01 µM).

Dataset Information

Sensitive and Specific Whole-Cell Biosensor for Arsenic Detection.

Publications

Sensitive and Specific Whole-Cell Biosensor for Arsenic Detection.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets