Dataset Information

Influence of ankle joint position on angles and distances of the ankle mortise using intraoperative cone beam CT: A cadaveric study.

ABSTRACT:

Background

The precise anatomical reduction of the ankle mortise is crucial for the clinical outcome in unstable syndesmotic injuries. Intraoperative cone beam computed tomography (CT), in addition to two-dimensional fluoroscopy, provides detailed information about the reduction and implant placement. The aim of this study was to analyze the influence of the joint position on the fibula position in the incisural notch and to determine the inter- and intraindividual anatomical differences in the intact ankle joints.

Methods

A total of 20 fresh-frozen lower legs disarticulated in the knee joint of 10 individuals were included. The measurements were performed using a cone beam CT. The distances and angles were measured in the standard imaging planes. The mean values of distances and angles were compared during the different joint positions: 10° dorsiflexion, 0° neutral position and 20° plantar flexion.

Results

The influence of the joint position was on average as follows: The anterior tibiofibular distance was 3.68 mm in 10° dorsiflexion, 3.66 mm (0° neutral position) and 3.59 mm (20° plantar flexion). The posterior tibiofibular distance measured 7.82mm, 7.76mm and 7.82mm. The rotation of the fibula measured ten millimeters proximal the joint line was 1.2°, 1.3° and 1.05°. The fibular rotation determined 4mm was 9.3°, 9.4° and 9.4°. On average, the following intraindividual variations were observed: superior tibiotalar clear space of 0.27mm and 0.15mm medial; and anterior tibiofibular distance of 0.42mm, 0.38mm posterior and 0.24mm in the incisural notch. The proximal angle of the fibular rotation was 0.2° and distal 0.4°. The interindividual variations of the angles and distances exceeded the intraindividual values partly by 3 to 4 fold.

Conclusions

Within the scope of this study neither the tibiofibular distance, nor the tibiofibular angle changed significantly through the different joint positions. The intraindividual differences were little while the interindividual variations of the parameters were distinctive.

SUBMITTER: Vetter SY

PROVIDER: S-EPMC6544278 | biostudies-literature | 2019

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Influence of ankle joint position on angles and distances of the ankle mortise using intraoperative cone beam CT: A cadaveric study.

Vetter Sven Y SY Privalov Maxim M Beisemann Nils N Swartman Benedict B Keil Holger H Kirsch Joachim J Grützner Paul Alfred PA Franke Jochen J

PloS one 20190531 5

<h4>Background</h4>The precise anatomical reduction of the ankle mortise is crucial for the clinical outcome in unstable syndesmotic injuries. Intraoperative cone beam computed tomography (CT), in addition to two-dimensional fluoroscopy, provides detailed information about the reduction and implant placement. The aim of this study was to analyze the influence of the joint position on the fibula position in the incisural notch and to determine the inter- and intraindividual anatomical differences ...[more]

PMID: 31150469

Similar Datasets

Project description:ObjectivesThe primary objective of this study was to establish the reproducibility of cochlear microphonic (CM) recordings obtained from a cochlear implant (CI) electrode contact during and immediately after insertion. This was achieved by evaluating the insertion angle and calculating the position of the apical electrode contact during insertion, using postoperative cone beam computed tomography (CBCT). The secondary objective was to create individualized patient maps of electrode contacts located within acoustically sensitive regions by correlating the CM amplitude to the electrode position determined using CBCT.MethodsCMs were recorded from a CI electrode contact during and immediately after insertion in 12 patients (n = 14 ears). Intraoperative recordings were made for a 0.5 kHz tone burst stimulus and were recorded from the apical electrode contact. Postinsertion recordings were made from the odd-numbered electrode contacts (1-15) along the array, using a range of stimulus frequencies (from 0.125 to 2 kHz). The time point at which each electrode contact passed through the round window was noted throughout the insertion, and the CM amplitude at this point was correlated to postoperative CBCT. This correlation was then used to estimate the CM amplitude at particular points within the cochlea, which was in turn compared with the amplitudes recorded from each electrode postoperatively to assess the reproducibility of the recordings.ResultsSignificant correlation was shown between intraoperative insertion and postinsertion angles at two amplitude events (maximum amplitude: 29° mean absolute error, r = 0.77, p = 0.006; 10% of maximum amplitude: 52° mean absolute error, r = 0.85, p = 0.002).ConclusionWe have developed a novel method to demonstrate the reproducibility of the CM responses recorded from a CI electrode during insertion. By correlating the CM amplitude with the postoperative CBCT, we have also been able to create individualized maps of CM responses, categorizing the cochlea into acoustically responsive and unresponsive regions. If the electrode contacts within the acoustically sensitive regions are shown to be associated with improved loudness discrimination, it could have implications for optimal electrode mapping and placement.

Project description:BackgroundThe purpose of this study was to evaluate the effect of ankle plantarflexion and the axial location of measurement on quantitative syndesmosis assessment.MethodsTwelve fresh-frozen cadaveric specimens were secured in three positions of ankle plantarflexion (0°, 15°, and 30°) using an ankle-spanning external fixator and underwent CT scans at each position. Syndesmotic measurements were obtained on axial images using three previously described methods (six measurements) at the level of the tibial plafond and 1 cm proximal to the plafond. Method 1 evaluated the distance between the most anterior and posterior aspects of the fibula and tibia. Method 2 measured medial-lateral diastasis of the anterior and posterior aspects of the fibula, and fibular anterior-posterior translation. Method 3 evaluated axial rotation of the fibula. All measurements were performed by two independent observers. Inter-rater reliability of each measurement was evaluated using intra-class coefficients. Repeated measures analysis of variance (RM-ANOVA) was performed to evaluate within-specimen differences in measurements obtained at varying ankle positions.ResultsThe anterior incisura component of method 1 demonstrated poor-to-moderate inter-rater reliability across all ankle positions and at both measurement locations. Inter-rater reliability was highest for method 2, especially when measured 1 cm proximal to the plafond. Method 3 demonstrated moderate reliability 1 cm proximal to the plafond. After correcting for multiple comparisons, RM-ANOVA and pairwise analysis revealed that none of the measurements changed significantly with varying ankle position.ConclusionThe inter-rater reliability of the most common method of syndesmotic evaluation (method 1) was found to be lower than in previous studies. The most reliable syndesmotic evaluation can be made by measuring diastasis and anteroposterior translation 1 cm proximal to the plafond (method 2). Ankle position from 0° to 30° of plantarflexion did not change the measurements obtained.Level of evidenceIV.

Project description:Recent studies have suggested that the nervous system generates movements by controlling groups of motor neurons (synergies) that do not always align with muscle anatomy. In this study, we determined whether these synergies are robust across tasks with different mechanical constraints. We identified motor neuron synergies using principal component analysis (PCA) and cross-correlations between smoothed discharge rates of motor neurons. In part 1, we used simulations to validate these methods. The results suggested that PCA can accurately identify the number of common inputs and their distribution across active motor neurons. Moreover, the results confirmed that cross-correlation can separate pairs of motor neurons that receive common inputs from those that do not receive common inputs. In part 2, 16 individuals performed plantarflexion at three ankle angles while we recorded EMG signals from the gastrocnemius lateralis (GL) and medialis (GM) and the soleus (SOL) with grids of surface electrodes. The PCA revealed two motor neuron synergies. These motor neuron synergies were relatively stable, with no significant differences in the distribution of motor neuron weights across ankle angles (P = 0.62). When the cross-correlation was calculated for pairs of motor units tracked across ankle angles, we observed that only 13.0% of pairs of motor units from GL and GM exhibited significant correlations of their smoothed discharge rates across angles, confirming the low level of common inputs between these muscles. Overall, these results highlight the modularity of movement control at the motor neuron level, suggesting a sensible reduction of computational resources for movement control. KEY POINTS: The CNS might generate movements by activating groups of motor neurons (synergies) with common inputs. We show here that two main sources of common inputs drive the motor neurons innervating the triceps surae muscles during isometric ankle plantarflexions. We report that the distribution of these common inputs is globally invariant despite changing the mechanical constraints of the tasks, i.e. the ankle angle. These results suggest the functional relevance of the modular organization of the CNS to control movements.

Project description:BackgroundDocumenting the healthy articulation of the syndesmosis and talocrural joints, and measurement of 3D medial and lateral clear spaces may improve diagnostic and treatment guidelines for patients suffering from severe syndesmotic injury or chronic instability. This study aimed to define the range of motion (ROM) and displacement of the fibula and talus during static and dynamic activities, and measure the 3D movement in the tibiofibular (syndesmosis) and medial clear space.MethodsSix healthy volunteers performed dynamic weightbearing motions on a single-leg: heel-rise, squat, torso twist, and box jump. Participants posed in a nonweightbearing neutral stance as well as weightbearing neutral standing, plantarflexion, and dorsiflexion. High-speed stereoradiography measured 3D rotation and translation of the fibula and talus throughout each task. Medial clear space and tibiofibular gap distances were measured under each condition.ResultsTotal ROM for the fibula was greatest in internal-external rotation (9.3 ± 3.5 degrees), and anteroposterior (3.3 ± 2.2 mm) and superior-inferior (2.5 ± 0.9 mm) translation, rather than lateral widening (1.7 ± 1.0 mm). The total rotational ROM of the talus was greatest in dorsiflexion-plantarflexion (34.7 ± 12.9 degrees) and internal-external rotation (15.0 ± 3.4 degrees). Single-leg squatting increased the lateral clear space (P = .045) and widened the medial tibiofibular joint, whereas single-leg heel-rises decreased the lateral clear space (P = .001) and widened the tibiotalar space. Gap spaces in the tibiofibular and medial clear spaces did not exceed 2.3 ± 0.9 mm and 2.7 ± 1.2 mm, respectively.ConclusionThese data support a potential shift in the clinical understanding of fibula displacements during dynamic activities and how implant device constructs might be developed to restore physiologic mechanics.Clinical relevanceSyndesmosis stabilization and rehabilitation should consider restoration of normal physiologic rotation and translation of the fibula and ankle mortise rather than focusing solely on the restriction of lateral translation.

Project description:BackgroundMinimally invasive surgery (MIS) for evacuation of spontaneous intracerebral hemorrhage (ICH) has shown promise but there remains a need for intraoperative performance assessment considering the wide range of evacuation effectiveness. In this feasibility study, we analyzed the benefit of intraoperative 3-dimensional imaging during navigated endoscopy-assisted ICH evacuation by mechanical clot fragmentation and aspiration.Methods18 patients with superficial or deep supratentorial ICH underwent MIS for clot evacuation followed by intraoperative computerized tomography (iCT) or cone-beam CT (CBCT) imaging. Eligibility for MIS required (a) availability of intraoperative iCT or CBCT, (b) spontaneous lobar or deep ICH without vascular pathology, (c) a stable ICH volume (20-90 ml), (d) a reduced level of consciousness (GCS 5-14), and (e) a premorbid mRS ≤ 1. Demographic, clinical, and radiographic patient data were analyzed by two independent observers.ResultsNine female and 9 male patients with a median age of 76 years (42-85) presented with an ICH score of 3 (1-4), GCS of 10 (5-14) and ICH volume of 54 ± 26 ml. Clot fragmentation and aspiration was feasible in all cases and intraoperative imaging determined an overall evacuation rate of 80 ± 19% (residual hematoma volume: 13 ± 17 ml; p < 0.0001 vs. Pre-OP). Based on the intraoperative imaging results, 1/3rd of all patients underwent an immediate re-aspiration attempt. No patient experienced hemorrhagic complications or required conversion to open craniotomy. However, routine postoperative CT imaging revealed early hematoma re-expansion with an adjusted evacuation rate of 59 ± 30% (residual hematoma volume: 26 ± 37 ml; p < 0.001 vs. Pre-OP).ConclusionsRoutine utilization of iCT or CBCT imaging in MIS for ICH permits direct surgical performance assessment and the chance for immediate re-aspiration, which may optimize targeting of an ideal residual hematoma volume and reduce secondary revision rates.

Dataset Information

Influence of ankle joint position on angles and distances of the ankle mortise using intraoperative cone beam CT: A cadaveric study.

Background

Methods

Results

Conclusions

Publications

Influence of ankle joint position on angles and distances of the ankle mortise using intraoperative cone beam CT: A cadaveric study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets